vrrpOperationsVrId
VRRP-MIB ·
.1.3.6.1.2.1.68.1.7.1.2
Object
column
VrId
This object contains the Virtual Router Identifier (VRID).
Context
- MIB
- VRRP-MIB
- OID
.1.3.6.1.2.1.68.1.7.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- vrrpOperationsEntry
- Table
- vrrpOperationsTable
- Siblings
- 13
Syntax
VrId
- Source
- VrId
- Base type
Integer32
Values & Constraints
Type Constraints
range: 1..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpOperationsInetAddrType The IP address type of VrrpOperationsEntry. This value
applies to both vrrpOperationsMasterIpAddr and
vrrpOperationsPrimaryIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.68.1.7.1.1 |
| vrrpOperationsPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.7.1.10 |
| vrrpOperationsAcceptMode Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.7.1.11 |
| vrrpOperationsUpTime This is the value of the `sysUpTime' object when this
virtual router (i.e., the `vrrpOperationsState')
transitioned out of `initialized'. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.68.1.7.1.12 |
| vrrpOperationsStorageType The storage type for this conceptual row. Write access
is not required. It is optional to support nonVolatile
StorageType enumeration. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.68.1.7.1.13 |
| vrrpOperationsRowStatus The RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows. When `vrrpOperationsRowStatus' is set to
active(1), no other … | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.68.1.7.1.14 |
| vrrpOperationsVirtualMacAddr The virtual MAC address of the virtual router.
Although this object can be derived from the
'vrrpOperationsVrId' object, it is defined so that it
is easily obtainable by a m… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.68.1.7.1.3 |
| vrrpOperationsState The current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a… | column | Enumeration | .1.3.6.1.2.1.68.1.7.1.4 |
| vrrpOperationsPriority This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', althoug… | column | Unsigned32 | .1.3.6.1.2.1.68.1.7.1.5 |
| vrrpOperationsAddrCount The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the vrrpAssociatedAddrTable that
correspond to a give… | column | Integer32 | .1.3.6.1.2.1.68.1.7.1.6 |
| vrrpOperationsMasterIpAddr The master router's real IP address. Master router
would set this address to vrrpOperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is the… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.7.1.7 |
| vrrpOperationsPrimaryIpAddr In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrr… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.7.1.8 |
| vrrpOperationsAdvInterval The time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | centiseconds Integer32 | .1.3.6.1.2.1.68.1.7.1.9 |