tnOthOdukTTraceIdentifierAccepted
TROPIC-OTH-MIB ·
.1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.9
Object
column
OctetString
The actual trace identifier accepted. This
object is applicable only to the following three
cases.
(i) tnOthOdukDirectionality has the value
bidirectional(3), or
(ii) tnOthOdukDirectionality has the value
sink(1) and tnOthOdukTCodirectional has
the value true(1), or
(iii) tnOthOdukDirectionality has the value
source(3) and tnOthOdukTCodirectional has
the value false(2).
It must not be instantiated in rows for all other
cases. The value of this object is unspecified
when tnOthOdukTCurrentStatus indicates a near-end
defect (i.e., oci(0), lck(1), ssf(5)) that
prevents extraction of the trace message. It
consists of the following three parts:
- RXSAPI is the fist 16 Octets (TTI[0]-TTI[15])
- RXDAPI is the second 16 octets (TTI[16]-TTI[31])
- RXOS (operator specific) is the last 32 octets
(TTI[32]-TTI[63]).
TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0])
shall be fixed to all 0s.
Context
- MIB
- TROPIC-OTH-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tnOthOdukTEntry
- Table
- tnOthOdukTTable
- Siblings
- 34
Syntax
OctetString
Values & Constraints
Object Constraints
range: 64-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnOthOdukTTimDetMode Indicates the mode of the Trace Identifier
Mismatch (TIM) Detection function. | column | TROPIC-TCAluWdmTimDetMode | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.10 |
| tnOthOdukTTimActEnabled Indicates whether the Trace Identifier Mismatch
(TIM) Consequent Action function is enabled. This
object has no effect when tnOthOdukTTimDetMode is
equal to off(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.11 |
| tnOthOdukTTtpTtiStatus ODUkT TTI status. | column | TROPIC-TCAluWdmTtiStatus | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.12 |
| tnOthOdukTAisOnDef Determines if consequent action of sending AIS
will be taken on the TCM defect. enable enables
Consequent Action of TCM defect, while disable
disables Consequent Action of TCM de… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.13 |
| tnOthOdukTLtcResp LTC defect Response. This parameter determines
whether a LTC defect contributes to the Consequent
Action or not. It is disabled(2) by default. This
object is applicable when tnO… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.14 |
| tnOthOdukTOhAdd Determines if the provisioned TCM Overhead is
inserted or not. It is false by default. This
object is applicable when tnOthOdukTTcmMode is
equal to termination. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.15 |
| tnOthOdukTOhRmv Determines if the received TCM Overhead is
discarded or not. It is false by default.
This object is applicable when tnOthOdukTTcmMode
is equal to termination. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.16 |
| tnOthOdukTcmIfIndex A unique index, greater than zero, for each ODU
entity. This is the high-order index part.
------------------------------------------------------
| Bit31-Bit24 | B… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.17 |
| tnOthOdukTcmIfIndexLo A unique index, greater than zero, for each ODU
entity. This is the low-order index part.
---------------------------------------------------------
| Bit31-Bit23 |… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.18 |
| tnOthOdukTDegThr Specifies the burst threshold as a number of
errored blocks on the ODU layer. A second is
declared as good if the number of detected
errored blocks within one second is less than… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.19 |
| tnOthOdukTDegM Specifies the number of consecutive bad seconds
(tnOthOdukRTDegM* tnOthOdukTDegPeriod)
to be detected before declaring a signal degrade
defect on the ODU. The defect is cleared i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.20 |
| tnOthOdukTDapiAccepted The DAPI bytes received. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.21 |
| tnOthOdukTDapiExpected The DAPI bytes expected by the receiver. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.22 |
| tnOthOdukTDapiTransmitted The DAPI bytes transmitted. The TTI[17] to
TTI[31] contain the 15-character destination
access point identifie (DAPI). | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.23 |
| tnOthOdukTOsAccepted The OS bytes received. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.24 |
| tnOthOdukTOsTransmitted The OS bytes transmitted. The TTI[32] to
TTI[63] contain the 32-character Operator
Specific (OS). | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.25 |
| tnOthOdukTTcmAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.26 |
| tnOthOdukTcmOperStatus ODUk TCM Operational state. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.27 |
| tnOthOdukTcmMgracd Indicates if managed by CP, MGNPLN, shared by both or free. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.28 |
| tnOthOdukTcmincstat Displays the accepted TCM stat byte value including status information. | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.29 |
| tnOthOdukTRowStatus This columnar object is used for creating and
deleting a conceptual row of tnOthOdukTable.
It is used to model the addTCM and removeTCM
operations of an ODUk_CTP or ODUk_TTP for T… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.3 |
| tnOthOdukTcmOperationalCapability ODUk TCM Operational Capability. | column | TROPIC-TCTropicOperationalCapabilityType | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.30 |
| tnOthOdukTcmStateQualifier Indicates the state qualifier (i.e., the
secondary state) of the ODUk TCM State. | column | TROPIC-TCTropicStateQualifierType | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.31 |
| tnOthOdukTcmDMInvoke Invokes a single delay measurement by toggling
once the DM bit. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.32 |
| tnOthOdukTcmDMTimeStamp Time-stamp for the reported delay measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.33 |
| tnOthOdukTcmDMCMEPMode Connection Monitoring End Point Mode defined for
delay measurement. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.34 |
| tnOthOdukTcmDMStatus Delay Measurement Status. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.35 |
| tnOthOdukTcmDMTime Time for the reported delay measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.36 |
| tnOthOdukTDegPeriod Specifies the detection time unit for a signal degrade
defect on the ODU. The signal degrade detection time
window is specified by tnOthOdukTDegPeriod multiplied
by tnOthOdukTDeg… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.37 |
| tnOthOdukTTcmMode Indicates the TCM termination mode. There are
two valid values, termination or non-intrusive
monitoring (NIM). An TCM entity is created
either in termination mode or in NIM mode. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.4 |
| tnOthOdukTPosSeq Indicates the relative position of the TCM
monitor point. The lower the position sequence,
the closer the TCM monitor point to the
client/matrix. This means that the consequent
… | column | Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.5 |
| tnOthOdukTAdminStatus ODUk TCM administrative state. It is used to
suppress the alarms the ODU TCM entity. | column | TROPIC-TCAluWdmOdukStatus | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.6 |
| tnOthOdukTSapiTransmitted The SAPI bytes in trace identifier transmitted
in the TCM layer. This object is applicable when
tnOthOdukDirectionality has the value source(2)
or bidirectional(3). It must not … | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.7 |
| tnOthOdukTSapiExpected The SAPI expected by the receiver. This object
has no effect when tnOthOdukTTimDetMode is equal
to off(1). | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.8 |