tnOthOdukNimDirectionality

TROPIC-OTH-MIB · .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.1

Object

column Enumeration

Specifies the monitor point for the ODUk Path
non-intrusive monitoring function.  The value
source(2) is not allowed if the corresponding
instance of tnOthOdukDirectionality has the
value sink(1), and the value sink(1) is not
allowed if the corresponding instance of
tnOthOdukDirectionality has the value source(2).
Either the value sink(1) or source(2) is allowed
if the corresponding instance of
tnOthOdukDirectionality has the value
bidirectional(3).  The value sink(1) means
monitoring at the sink direction path signal of
the ODUk CTP.  The value source(2) means monitoring
at the source direction path signal of the ODUk
CTP.  Monitoring the source direction of an ODUk
CTP is necessary in those cases where the ODUk
CTP is at an SNCP (Subnetwork Connection
Protection) end (e.g., see Figure I.1.2/G.874.1).
If one would like to get the performance of the
protected connection, one cannot use the NIM
function at both ODUk CTP sinks (before the
matrix), instead one should monitor the signal
at the source ODUk CTP after the matrix.

Context

MIB: TROPIC-OTH-MIB
OID: .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.1
Type: column
Access: noaccess
Status: current
Parent: tnOthOdukNimEntry
Table: tnOthOdukNimTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	sink
`2`	source

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tnOthOdukNimPom This object is used to model the activateNim and deactivateNim operations of an OTUk_CTP for non-intrusive monitoring control as defined in G.874.1. Setting this object to true i…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.11`
tnOthOdukNimDapiAccepted The DAPI bytes received.	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.12`
tnOthOdukNimOsAccepted The OS bytes received.	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.13`
tnOthOdukNimDegPeriod Specifies the detection time unit for a signal degrade defect on the ODU. The signal degrade detection time window is specified by tnOthOdukNimDegPeriod multiplied by tnOthOdukNim…	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.14`
tnOthOdukNimDapiExpected The DAPI bytes expected by the receiver.	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.2`
tnOthOdukNimSapiExpected The SAPI expected by the receiver. This object has no effect when tnOthOdukNimTimDetMode has the value off(1).	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.3`
tnOthOdukNimTraceIdentifierAccepted The actual trace identifier accepted. The value of this object is unspecified if tnOthOdukNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if tnOthO…	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.4`
tnOthOdukNimTimDetMode Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function.	column	TROPIC-TCAluWdmTimDetMode	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.5`
tnOthOdukNimTimActEnabled Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.6`
tnOthOdukNimTtiStatus ODUk Nim TTI status.	column	TROPIC-TCAluWdmTtiStatus	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.7`
tnOthOdukNimDegThr Specifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.8`
tnOthOdukNimDegM Specifies the number of consecutive bad seconds (tnOthOdukNimDegM* tnOthOdukNimDegPeriod) to be detected before declaring a signal degrade defect on the ODU. The defect is cleare…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.9`