alarmType

TRAPS-COMMON · .1.3.6.1.4.1.42359.2.2.2.3.1.2
MIB view Table view

Object

scalar SNMP-FRAMEWORK-MIBSnmpAdminString 
This provides an identification of the alarm type. Together
with tfAlarmSpecificProblem, this is a unique identification
of the alarm. Different managed object types and instances
can share alarm types, but if the same managed object reports
the same alarm type, it is to be considered as the same alarm
state. The alarm type is a simplification of the different
X.733 and 3GPP alarm IRP alarm correlation mechanisms based
on EventType, ProbableCause, SpecificProblem and
NotificationId.

Context

MIB
TRAPS-COMMON
OID
.1.3.6.1.4.1.42359.2.2.2.3.1.2
Type
scalar
Access
notifyonly
Status
current
Parent
trapObjects
Siblings
17

Syntax

SNMP-FRAMEWORK-MIBSnmpAdminString
Source
SNMP-FRAMEWORK-MIBSnmpAdminString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alarmIndex
A unique value, greater than zero, for each alarm. The value for each alarm must remain constant at least from one re-initialization of the entity to the next re-initialization.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.42359.2.2.2.3.1.1
alarmOrigTime
Time for alarm raise
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.42359.2.2.2.3.1.10
alarmTime
A time stamp of the alarm state change event. Note that this variable represents the last change of the alarm state, like changed severity or additional text. If the alarm has no…
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.42359.2.2.2.3.1.11
alarmSeverity
The severity of the alarm as defined by X.733. Note that this may not be the original severity since the alarm may have changed severity. For cleared alarms, this is the last sev…
scalarEnumeration.1.3.6.1.4.1.42359.2.2.2.3.1.12
alarmHasClear
Indicates if the alarm is cleared or not.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.42359.2.2.2.3.1.13
alarmText
A user friendly text describing the alarm. Intended for human consumption.
scalarOctetString.1.3.6.1.4.1.42359.2.2.2.3.1.14
tenantName
Tenant name
scalarOctetString.1.3.6.1.4.1.42359.2.2.2.3.1.15
thresholdStatus
Status set/clear
scalarEnumeration.1.3.6.1.4.1.42359.2.2.2.3.1.16
currentUtilization
Current utilization in percentage
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.42359.2.2.2.3.1.17
alarmKey
This object can be used as a key to uniquely identify an alarm
scalarOctetString.1.3.6.1.4.1.42359.2.2.2.3.1.18
alarmDevice
The name of the managed device. May also be the system itself for self-management alarms. Note that this object is not fine-grained enough to pinpoint the alarming resource. The…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.42359.2.2.2.3.1.3
alarmObject
Name of alarm object within a device based on YANG naming. Note that the granularity must be good enough to guarantee unique alarm states and relevant resource identification to t…
scalarOctetString.1.3.6.1.4.1.42359.2.2.2.3.1.4
alarmObjectOID
Name of alarm object based on SNMP naming. Note that the granularity must be good enough to guarantee unique alarm states and relevant resource identification to the operator.
scalarObjectIdentifier.1.3.6.1.4.1.42359.2.2.2.3.1.5
alarmSpecificProblem
This object is used when the 'tfAlarmType' object cannot uniquely identify the alarm type. Normally, this is not the case, and this leaf is the empty string.
scalarOctetString.1.3.6.1.4.1.42359.2.2.2.3.1.6
alarmClass
The severity of the alarm as defined by X.733. Note that this may not be the original severity since the alarm may have changed severity. For cleared alarms, this is the last sev…
scalarEnumeration.1.3.6.1.4.1.42359.2.2.2.3.1.7
alarmEventType
The event type as defined in X.733/X.736.
scalarIANA-ITU-ALARM-TC-MIBIANAItuEventType.1.3.6.1.4.1.42359.2.2.2.3.1.8
alarmProbableCause
The probable cause as defined in X.733/X.736.
scalarIANA-ITU-ALARM-TC-MIBIANAItuProbableCause.1.3.6.1.4.1.42359.2.2.2.3.1.9