alarmTime
TRAPS-COMMON ·
.1.3.6.1.4.1.42359.2.2.2.3.1.11
Object
scalar
SNMPv2-TCDateAndTime
A time stamp of the alarm state change event. Note that this
variable represents the last change of the alarm state, like
changed severity or additional text. If the alarm has not
changed state this variable represents the alarm raise time
and will be the same as tfAlarmOrigTime.
NOTE: All fields of the DateAndTime MUST be filled out,
including the hours and minutes from UTC. As such, the value
should be 11 octets long.
Context
- MIB
- TRAPS-COMMON
- OID
.1.3.6.1.4.1.42359.2.2.2.3.1.11- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- trapObjects
- Siblings
- 17
Values & Constraints
Type Constraints
range: 8
range: 11
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmIndex A unique value, greater than zero, for each alarm. The value
for each alarm must remain constant at least from one
re-initialization of the entity to the next
re-initialization. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42359.2.2.2.3.1.1 |
| alarmOrigTime Time for alarm raise | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.42359.2.2.2.3.1.10 |
| alarmSeverity The severity of the alarm as defined by X.733. Note that
this may not be the original severity since the alarm may
have changed severity. For cleared alarms, this is the last
sev… | scalar | Enumeration | .1.3.6.1.4.1.42359.2.2.2.3.1.12 |
| alarmHasClear Indicates if the alarm is cleared or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.42359.2.2.2.3.1.13 |
| alarmText A user friendly text describing the alarm.
Intended for human consumption. | scalar | OctetString | .1.3.6.1.4.1.42359.2.2.2.3.1.14 |
| tenantName Tenant name | scalar | OctetString | .1.3.6.1.4.1.42359.2.2.2.3.1.15 |
| thresholdStatus Status set/clear | scalar | Enumeration | .1.3.6.1.4.1.42359.2.2.2.3.1.16 |
| currentUtilization Current utilization in percentage | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.42359.2.2.2.3.1.17 |
| alarmKey This object can be used as a key to uniquely identify an alarm | scalar | OctetString | .1.3.6.1.4.1.42359.2.2.2.3.1.18 |
| alarmType This provides an identification of the alarm type. Together
with tfAlarmSpecificProblem, this is a unique identification
of the alarm. Different managed object types and instances… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.42359.2.2.2.3.1.2 |
| alarmDevice The name of the managed device. May also be the system
itself for self-management alarms. Note that this object is
not fine-grained enough to pinpoint the alarming
resource. The… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.42359.2.2.2.3.1.3 |
| alarmObject Name of alarm object within a device based on YANG
naming. Note that the granularity must be good enough to
guarantee unique alarm states and relevant resource
identification to t… | scalar | OctetString | .1.3.6.1.4.1.42359.2.2.2.3.1.4 |
| alarmObjectOID Name of alarm object based on SNMP naming. Note that the
granularity must be good enough to guarantee unique alarm
states and relevant resource identification to the operator. | scalar | ObjectIdentifier | .1.3.6.1.4.1.42359.2.2.2.3.1.5 |
| alarmSpecificProblem This object is used when the 'tfAlarmType' object cannot
uniquely identify the alarm type. Normally, this is not the
case, and this leaf is the empty string. | scalar | OctetString | .1.3.6.1.4.1.42359.2.2.2.3.1.6 |
| alarmClass The severity of the alarm as defined by X.733. Note that
this may not be the original severity since the alarm may
have changed severity. For cleared alarms, this is the last
sev… | scalar | Enumeration | .1.3.6.1.4.1.42359.2.2.2.3.1.7 |
| alarmEventType The event type as defined in X.733/X.736. | scalar | IANA-ITU-ALARM-TC-MIBIANAItuEventType | .1.3.6.1.4.1.42359.2.2.2.3.1.8 |
| alarmProbableCause The probable cause as defined in X.733/X.736. | scalar | IANA-ITU-ALARM-TC-MIBIANAItuProbableCause | .1.3.6.1.4.1.42359.2.2.2.3.1.9 |