tpVrrpAuthType
TPLINK-VRRP-MIB ·
.1.3.6.1.4.1.11863.6.65.1.1.1.1.13
Object
column
r/w
Enumeration
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifindex(Vlan ID).
Context
- MIB
- TPLINK-VRRP-MIB
- OID
.1.3.6.1.4.1.11863.6.65.1.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tpVrrpGlobalCtrlEntry
- Table
- tpVrrpGlobalCtrlTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | normal |
1 | simple |
2 | md5 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tpVrrpVrid This object contains the Virtual Router Identifier (VRID). | column | Integer32 | .1.3.6.1.4.1.11863.6.65.1.1.1.1.1 |
| tpVrrpAdvertisement The time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | Integer32 | .1.3.6.1.4.1.11863.6.65.1.1.1.1.10 |
| tpVrrpPreeptMode Controls whether a higher priority virtual router will
preempt a lower priority master | column | Enumeration | .1.3.6.1.4.1.11863.6.65.1.1.1.1.11 |
| tpVrrpTimeDelay This is object is used to config the delay timer associated with the VRRP. | column | Integer32 | .1.3.6.1.4.1.11863.6.65.1.1.1.1.12 |
| tpVrrpKey The Authentication Key. This object is set according to
the value of the 'tpVrrpAuthType' object
('Simple' or 'MD5'). | column | OctetString | .1.3.6.1.4.1.11863.6.65.1.1.1.1.14 |
| tpVrrpState The current state of the virtual router. This object has
three defined values:
- `initialize', which indicates that all the
virtual router is waiting for a st… | column | Enumeration | .1.3.6.1.4.1.11863.6.65.1.1.1.1.15 |
| tpVrrpStatus The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
createAndGo(4),creat a new entry
destroy(6),destory the entry. | column | TPLINK-TC-MIBTPRowStatus | .1.3.6.1.4.1.11863.6.65.1.1.1.1.16 |
| tpVrrpVid The interface index | column | Integer32 | .1.3.6.1.4.1.11863.6.65.1.1.1.1.2 |
| tpVrrpIntfStatus The interface status | column | Enumeration | .1.3.6.1.4.1.11863.6.65.1.1.1.1.3 |
| tpVrrpInterfaceIP The interface IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.65.1.1.1.1.4 |
| tpVrrpMacAddress The virtual MAC address of the virtual router. | column | OctetString | .1.3.6.1.4.1.11863.6.65.1.1.1.1.5 |
| tpVrrpDescription The description of the VRRP. | column | OctetString | .1.3.6.1.4.1.11863.6.65.1.1.1.1.6 |
| tpVrrpPrimaryVirtualIp This is the IP address listed as the source in VRRP advertisement
last received by this virtual router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11863.6.65.1.1.1.1.7 |
| tpVrrpRunPriority This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.A priority of 255 is used for the router that own… | column | Integer32 | .1.3.6.1.4.1.11863.6.65.1.1.1.1.8 |
| tpVrrpConfigPriority This object operate the priority to be used for the
virtual router master election process. | column | Integer32 | .1.3.6.1.4.1.11863.6.65.1.1.1.1.9 |