tpStpPortInPathCost
TPLINK-SPANNING-TREE-MIB ·
.1.3.6.1.4.1.11863.6.21.1.2.1.1.5
Object
column
r/w
Integer32
InPath Cost is used to choose the path and calculate the path costs of ports in an MST region. It is an important criterion on determining the root port. The lower value has the higher priority. Make sure that Path Cost ranges from 0 to 2000000.
Context
- MIB
- TPLINK-SPANNING-TREE-MIB
- OID
.1.3.6.1.4.1.11863.6.21.1.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tpStpPortConfigEntry
- Table
- tpStpPortConfigTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tpStpPortNumber Displays the port number of the switch. | column | OctetString | .1.3.6.1.4.1.11863.6.21.1.2.1.1.1 |
| tpStpPortRole Displays the role of the port played in the STP Instance.
1.Disable:Indicates the port that is not participating in the STP.
2.Alternate:Indicates the port that can be a backup po… | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.10 |
| tpStpPortStatus Displays the working status of the port.
1.Disconnected: In this status the port is not participating in the STP.
2.Blocking: In this status the port can only receive BPDU packets… | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.11 |
| tpStpPortLag Displays the LAG number which the port belongs to. | column | OctetString | .1.3.6.1.4.1.11863.6.21.1.2.1.1.12 |
| tpStpPortEnable Select Enable /Disable STP function for the desired port.
0. Disable
1. Enable
2. ErrPort | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.2 |
| tpStpPortPriority Enter a value from 0 to 240 divisible by 16. Port priority
is an important criterion on determining the root port.
In the same condition, the port with the highest priority will… | column | Integer32 | .1.3.6.1.4.1.11863.6.21.1.2.1.1.3 |
| tpStpPortExPathCost ExPath Cost is used to choose the path and calculate the path costs
of ports in different MST regions. It is an important criterion on
determining the root port. The lower value… | column | Integer32 | .1.3.6.1.4.1.11863.6.21.1.2.1.1.4 |
| tpStpEdgePortStatus Select Enable/Disable Edge Port. The edge port can transit
its state from blocking to forwarding rapidly without waiting
for forward delay.
0. Disable
1. Enable | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.6 |
| tpStpPointToPointStatus Select the P2P link status. If the two ports in the P2P link are
root port or designated port, they can transit their states to
forwarding rapidly to reduce the unnecessary forw… | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.7 |
| tpStpPortMCheck Select Enable to perform MCheck operation on the port. Unchange means no MCheck operation.
0. unChange
1. enable | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.8 |
| tpStpPortStpVersion Displays the STP version of the port.
1. stp
2. rstp
3. mstp | column | Enumeration | .1.3.6.1.4.1.11863.6.21.1.2.1.1.9 |