vRtrInetAggrCommunityVal8
TIMETRA-VRTR-MIB ·
.1.3.6.1.4.1.6527.3.1.2.3.27.1.24
Object
column
r/w
OctetString
The value of vRtrInetAggrCommunityVal8 specifies the 8th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of the
route into other routers. A value of ''H indicates that the
vRtrInetAggrCommunityVal8 has not been set.
It is required to configure vRtrInetAggrCommunityVal7 before
configuring vRtrInetAggrCommunityVal8.
Context
- MIB
- TIMETRA-VRTR-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.3.27.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrInetInstAggrEntry
- Table
- vRtrInetInstAggrTable
- Siblings
- 32
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-72
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrInetAggrIpPrefixType The value of vRtrInetAggrIpPrefixType indicates the IP address type of
vRtrInetAggrIpPrefix. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.3.27.1.1 |
| vRtrInetAggrOperState The value of vRtrInetAggrOperState indicates the current operational
status of the aggregation entry. | column | TIMETRA-TC-MIBTmnxOperState | .1.3.6.1.4.1.6527.3.1.2.3.27.1.10 |
| vRtrInetAggrAggregatorAS4Byte The value of vRtrInetAggrAggregatorAS4Byte specifies the aggregator's
Autonomous System Number (ASN).
When vRtrInetAggrAggregatorAS4Byte is set to non zero, and
vRt… | column | INET-ADDRESS-MIBInetAutonomousSystemNumber | .1.3.6.1.4.1.6527.3.1.2.3.27.1.11 |
| vRtrInetAggrNextHopType The value of vRtrInetAggrNextHopType specifies whether the aggregate
route will be installed in the Forwarding Information Base (FIB) when
the route is activated.
W… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.27.1.12 |
| vRtrInetAggrCommunityVal The value of vRtrInetAggrCommunityVal specifies the community name
that is used to add to the aggregate route. This value could then be
used in route policies to control the distr… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.13 |
| vRtrInetAggrIndirectAddrType The value of vRtrInetAggrIndirectAddrType specifies the address type
of the indirect next-hop address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.3.27.1.14 |
| vRtrInetAggrIndirectAddr The value of vRtrInetAggrIndirectAddr specifies the address of the
indirect next-hop address.
An 'inconsistentValue' error will be returned if an attempt is made to… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.15 |
| vRtrInetAggrGenerateIcmp The value of vRtrInetAggrGenerateIcmp specifies if we should generate
and send an ICMP message when a packet matches an aggregate route with
a black-hole next-hop.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.27.1.16 |
| vRtrInetAggrDescription The value of vRtrInetAggrDescription is a user provided
description string for aggregate route. It can consist of any
printable, seven-bit ASCII characters up to 80 characters in… | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.3.27.1.17 |
| vRtrInetAggrCommunityVal2 The value of vRtrInetAggrCommunityVal2 specifies the 2nd community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.18 |
| vRtrInetAggrCommunityVal3 The value of vRtrInetAggrCommunityVal3 specifies the 3rd community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.19 |
| vRtrInetAggrIpPrefix The value of vRtrInetAggrIpPrefixType indicates the IP address prefix
to match for the aggregation. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.2 |
| vRtrInetAggrCommunityVal4 The value of vRtrInetAggrCommunityVal4 specifies the 4th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.20 |
| vRtrInetAggrCommunityVal5 The value of vRtrInetAggrCommunityVal5 specifies the 5th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.21 |
| vRtrInetAggrCommunityVal6 The value of vRtrInetAggrCommunityVal6 specifies the 6th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.22 |
| vRtrInetAggrCommunityVal7 The value of vRtrInetAggrCommunityVal7 specifies the 7th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.23 |
| vRtrInetAggrCommunityVal9 The value of vRtrInetAggrCommunityVal9 specifies the 9th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control the … | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.25 |
| vRtrInetAggrCommunityVal10 The value of vRtrInetAggrCommunityVal10 specifies the 10th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control th… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.26 |
| vRtrInetAggrCommunityVal11 The value of vRtrInetAggrCommunityVal11 specifies the 11th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control th… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.27 |
| vRtrInetAggrCommunityVal12 The value of vRtrInetAggrCommunityVal12 specifies the 12th community
name that is used to add to the aggregate route. This value could then
be used in route policies to control th… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.27.1.28 |
| vRtrInetAggrFlags This object is a bit-mask, with the following bits:
If the 'vRtrInetAggrValidLocalPref' bit is set, the value in the
'vRtrInetAggrLocalPreference' object is valid t… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.3.27.1.29 |
| vRtrInetAggrIpPrefixLen The value of vRtrInetAggrIpPrefixLen indicates the prefix length for
vRtrInetAggrIpPrefix, to match for the aggregation. | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.6527.3.1.2.3.27.1.3 |
| vRtrInetAggrLocalPreference The value of vRtrInetAggrLocalPreference specifies the local
preference value for this aggregate route.
This value is valid to use only if the 'vRtrInetAggrValidLoc… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.27.1.30 |
| vRtrInetAggrDiscardComponent When this optional flag is configured, in both the VPRN and GRT instance,
the aggregate is advertised with only the configured BGP community set.
None of the communities from the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.27.1.31 |
| vRtrInetAggrTunnelGroup The value of vRtrInetAggrTunnelGroup adds mc-ipsec state of specified
tunnel-group to aggregate route. | column | TIMETRA-TC-MIBTmnxTunnelGroupIdOrZero | .1.3.6.1.4.1.6527.3.1.2.3.27.1.32 |
| vRtrInetAggrPolicy When configured the policy to which this refers will determine which
routes can contribute to the aggregate. This cannot be configured
together with as-set or indirect nexthops. | column | TIMETRA-TC-MIBTLNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.3.27.1.33 |
| vRtrInetAggrRowStatus vRtrInetAggrRowStatus controls the creation and deletion of rows in
the table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.3.27.1.4 |
| vRtrInetAggrLastChanged The value of vRtrInetAggrLastChanged indicates the time stamp of the
last change to this row of vRtrInetInstAggrTable. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.3.27.1.5 |
| vRtrInetAggrSummaryOnly The value of vRtrInetAggrSummaryOnly specifies if specific routes that
make up aggregates are advertised or not.
When vRtrInetAggrSummaryOnly has value of 'true(1)'… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.27.1.6 |
| vRtrInetAggrASSet The value of vRtrInetAggrASSet specifies whether the aggregate route
has AS-SET.
When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the
resulting aggrega… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.27.1.7 |
| vRtrInetAggrAggregatorAS obsolete The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN.
When vRtrInetAggrAggregatorAS is set to non zero, and
vRtrInetAggrAggregatorIPAddr is set to n… | column | TIMETRA-TC-MIBTmnxBgpAutonomousSystem | .1.3.6.1.4.1.6527.3.1.2.3.27.1.8 |
| vRtrInetAggrAggregatorIPAddr The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's
IP address.
When vRtrInetAggrAggregatorAS is set to non zero, and
vRtrInetAggrAggregatorIPAddr … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.27.1.9 |