vRtrIfDHCPLayer2Header
TIMETRA-VRTR-MIB ·
.1.3.6.1.4.1.6527.3.1.2.3.19.1.34
Object
The value of vRtrIfDHCPLayer2Header specifies, together with the value
of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in
anti-spoof entries for the lease states on this interface.
When it is set to 'false (2)', the client hardware address from the
DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is
used.
When it is set to 'true (1)', the behavior depends on the value of
vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to
all zeros, the source MAC address in the L2 header of the DHCP packet
is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value
is used.
Only if the corresponding row in the vRtrIfTable has the value of the
object vRtrIfType equal to 'serviceIesGroup', it is allowed to set the
value of vRtrIfDHCPLayer2Header to 'true'.
Context
- MIB
- TIMETRA-VRTR-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.3.19.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRtrIfDHCPEntry
- Table
- vRtrIfDHCPTable
- Siblings
- 47
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrIfDHCPRelayInfoOption obsolete vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If
the value of this object is set to 'false', DHCP Relay is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.1 |
| vRtrIfDHCPRelayServer5 vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.10 |
| vRtrIfDHCPRelayServer6 vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.11 |
| vRtrIfDHCPRelayServer7 vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.12 |
| vRtrIfDHCPRelayServer8 vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.13 |
| vRtrIfDHCPRelayTrusted When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the
router will relay requests where the DHCP giaddr is zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.14 |
| vRtrIfDHCPAdminState vRtrIfDHCPAdminState is used to configure the desired administrative
state of DHCP on this interface. If the value of vRtrIfType is network
this object can only be set to 'outOfSe… | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.3.19.1.15 |
| vRtrIfDHCPSnooping obsolete vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets
received on interface. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.16 |
| vRtrIfDHCPDescription The value of vRtrIfDHCPDescription is a user provided description
string for DHCP on this virtual router interface. It can consist of
any printable, seven-bit ASCII characters up… | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.3.19.1.17 |
| vRtrIfDHCPAutoFilterId obsolete vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used
for this interface. | column | TIMETRA-FILTER-MIBTFilterID | .1.3.6.1.4.1.6527.3.1.2.3.19.1.18 |
| vRtrIfDHCPOperAutoFilter obsolete The value of vRtrIfDHCPOperAutoFilter indicates the number of active
auto-filter entries per interface. These entries are created in the
TIMETRA-FILTER-MIB::tIPFilterTable by the … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.19 |
| vRtrIfDHCPRelayInfoAction vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay
reforwarding policy.
replace(1) - replace existing information with
DHCP relay informatio… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.2 |
| vRtrIfDHCPAuthPolicy Defines which subscriber authentication policy must be applied when a
subscriber message (e.g. DHCP, PPPoE, ...) is received on the
interface. The authentication policy must be de… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.3.19.1.20 |
| vRtrIfDHCPLeasePopulate The value of the object vRtrIfDHCPLeasePopulate specifies the
maximum number of DHCPv4 lease states allowed
- on this interface, if it is a retailer interface, or
- per Service Ac… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.21 |
| vRtrIfDHCPOperLeasePopulate The value of the object vRtrIfDHCPOperLeasePopulate indicates the
maximum number of DHCP lease states allocated on this interface. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.22 |
| vRtrIfDHCPGiAddressType The value of vRtrIfDHCPGiAddressType specifies the type of
vRtrIfDHCPGiAddress, the gateway interface address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.3.19.1.23 |
| vRtrIfDHCPGiAddress The value of vRtrIfDHCPGiAddress specifies the gateway interface
address. The type of this address is specified by the value of
vRtrIfDHCPGiAddressType. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.24 |
| vRtrIfDHCPGiAddressAsSrc The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay
should use the gateway interface address as the source IP address when
communicating with the DHCP server. W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.25 |
| vRtrIfDHCPMatchOption82 The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay
should use the circuit ID in the option 82 field in DHCP packets to
match DHCP messages. When it is set to 't… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.26 |
| vRtrIfDHCPRelayRemoteIdStr The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the
DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to
'remote-id'. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.27 |
| vRtrIfDHCPProxyAdminState The value of vRtrIfDHCPProxyAdminState specifies the desired
administrative state of the proxy server on this interface.
When it is set to 'inService', the proxy se… | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.3.19.1.28 |
| vRtrIfDHCPProxyServerAddr The value of vRtrIfDHCPProxyServerAddr specifies the IP address which
will be used as the source address of the emulated DHCP server.
If this IP address is not conf… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.29 |
| vRtrIfDHCPRelayCircuitId The value of the object vRtrIfDHCPRelayCircuitId specifies whether or
not the circuit-id suboption is present, and if it is present what
information goes in it.
If the value of th… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.3 |
| vRtrIfDHCPProxyLeaseTime The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a
DHCP client is allowed to use the offered IP address.
Value 0 means the lease time provided by… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.30 |
| vRtrIfDHCPProxyLTRadiusOverride The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not
the lease time provided by the RADIUS server or local user database is
presented to the DHCP client.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.31 |
| vRtrIfDHCPVendorIncludeOptions The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded
in the Nokia vendor specific sub-option of option 82.
The values 'serviceId(2)' and 'sapId(3)'… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.3.19.1.32 |
| vRtrIfDHCPVendorOptionString The value of vRtrIfDHCPVendorOptionString specifies the string that
goes into the Nokia vendor specific sub-option of option 82.
This string is only used when vRtrI… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.33 |
| vRtrIfDHCPAntiSpoofMacAddr The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the
value of object vRtrIfDHCPLayer2Header, the MAC address that is used
in anti-spoof entries for the lease state… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.35 |
| vRtrIfDHCPClientApplications The value of vRtrIfDHCPClientApplications specifies the set of client
applications that can make use of the DHCP relay functionality on this
interface. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.3.19.1.36 |
| vRtrIfDHCPRelayPlainBootp The value of vRtrIfDHCPRelayPlainBootp specifies whether plain bootp
messages will be relayed. If set to 'disabled', the system will
consider plain bootp packets as malformed DHCP… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.37 |
| vRtrIfDHCPUserDb The value of vRtrIfDHCPUserDb specifies the local user database to
authenticate against.
If no authentication with the local user database is required, the
value of… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.3.19.1.38 |
| vRtrIfDHCPUseArpForReply The value of vRtrIfDHCPUseArpForReply specifies, how the
system determines the Hw address for outgoing IP packets.
If set to 'false', the DHCP CHADDR (Client Hardw… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.3.19.1.39 |
| vRtrIfDHCPRelayRemoteId The value of vRtrIfDHCPRelayRemoteId specifies what information goes
into the remote-id suboption in the DHCP Relay packet. If the
value of this object is set to 'none', the remo… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.4 |
| vRtrIfDHCPFilterId The value of vRtrIfDHCPFilterId specifies the DHCP filter to apply.
If no filtering is required, the value of this object must be set to
0. | column | TIMETRA-FILTER-MIBTDHCPFilterID | .1.3.6.1.4.1.6527.3.1.2.3.19.1.40 |
| vRtrIfDHCPRelayUnicastMsg The value of vRtrIfDHCPRelayUnicastMsg specifies whether unicast
messages will be relayed.
If set to 'none', the system will not relay any messages. If set to
'rene… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.41 |
| vRtrIfDHCPPythonPolicy The value of vRtrIfDHCPPythonPolicy specifies the Python policy used
for processing DHCP messages on this interface.
The specified Python policy needs to exists in … | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.3.19.1.42 |
| vRtrIfDHCPVirtualSubnet The value of vRtrIfDHCPVirtualSubnet specifies if virtual subnetting
is enabled for DHCPv4 hosts on this interface.
The value 'enabled' is only supported while the … | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.3.19.1.44 |
| vRtrIfDHCPRelaySiaddrOvrAddrType The value of vRtrIfDHCPRelaySiaddrOvrAddrType specifies the type of
vRtrIfDHCPRelaySiaddrOvrAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.3.19.1.45 |
| vRtrIfDHCPRelaySiaddrOvrAddr The value of vRtrIfDHCPRelaySiaddrOvrAddr specifies the IP address to
use instead of the 'siaddr', while the value of
vRtrIfDHCPRelayUnicastMsg is not 'none'. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.3.19.1.46 |
| vRtrIfDHCPOSelDiscoDly The value of vRtrIfDHCPOSelDiscoDly specifies the default amount of
time to delay DHCP Discovery messages to any server.
This can be overruled by more specific set… | column | deci-seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.47 |
| vRtrIfDHCPOSelClntMac The value of vRtrIfDHCPOSelClntMac specifies the MAC filter for a
client subset which require a specific setting for DHCP Offer
selection. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.3.19.1.48 |
| vRtrIfDHCPOSelClntMacDiscoDly The value of vRtrIfDHCPOSelClntMacDiscoDly specifies the amount of
time to delay DHCP Discovery messages relayed to any server. | column | deci-seconds Integer32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.49 |
| vRtrIfDHCPAutoFilter obsolete vRtrIfDHCPAutoFilter allows the router to automatically build
anti-spoofing filter lists. When this object is set to a non-zero
value, auto-filtering is enabled and a filter allow… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.3.19.1.5 |
| vRtrIfDHCPRelayServer1 vRtrIfDHCPRelayServer1 is used to configure the first DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.6 |
| vRtrIfDHCPRelayServer2 vRtrIfDHCPRelayServer2 is used to configure the second DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.7 |
| vRtrIfDHCPRelayServer3 vRtrIfDHCPRelayServer3 is used to configure the third DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.8 |
| vRtrIfDHCPRelayServer4 vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server
where the requests will be forwarded. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.3.19.1.9 |