tmnxSLAProfReportIngRateType
TIMETRA-SUBSCRIBER-MGMT-MIB ·
.1.3.6.1.4.1.6527.3.1.2.33.1.8.1.14
Object
The value of tmnxSLAProfReportIngRateType specifies what rate will be reported in the L2TP RX-connect-speed attribute (AVP 38) when creating an L2TP LAC session.
Context
- MIB
- TIMETRA-SUBSCRIBER-MGMT-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.33.1.8.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Default
maximum- Parent
- tmnxSLAProfileEntry
- Groups
- 8
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-SUBSCRIBER-MGMT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfReportIngRateType'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-SUBSCRIBER-MGMT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfReportIngRateType.<tmnxSLAProfName>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-SUBSCRIBER-MGMT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfReportIngRateType'
Syntax
- Source
- TmnxSubReportRateType
- Base type
Enumeration
Type Description
The TmnxSubReportRateType data type is an enumerated integer that
indicates what rate will be reported when creating an L2TP
session:
- maximum (0): Take the port rate.
- aggRateLimit (1): Take the aggregate rate as received from the
RADIUS Access-Accept message in
VSA 'Alc-Subscriber-QoS-Override'. When this
RADIUS VSA is not present in the Access-Accept
or when RADIUS is not used then take the
configured aggregate rate limit; in case none
is configured then take the port rate.
- namedScheduler (2): Take the rate of the specified scheduler, in
case the scheduler is not linked with the
scheduler policy from the subscriber profile
then take the port rate.
- pppoeActualRate (3): Take the rate from the DSL-Forum
Vendor-Specific PPPoE Tag when available,
otherwise take the port rate.
- rfc5515ActualRate (4):
Put the same value as the transmitted Actual-Data-Rate-Upstream AVP
in the Rx-Connect-Speed AVP,
and the same value as the transmitted Actual-Data-Rate-Downstream AVP
in the Tx-Connect-Speed AVP.
- policerId (5): Take the rate of the specified policer, in case the policer is not
linked with the policer from the sla-profile then take the port rate.
Values & Constraints
Type Values
0 | maximum |
1 | aggRateLimit |
2 | namedScheduler |
3 | pppoeActualRate |
4 | rfc5515ActualRate |
5 | policerId |