sapTmplTlsLimitMacMoveLevel

TIMETRA-SAP-MIB · .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.18
MIB view Table view

Object

column r/w TIMETRA-SERV-MIBTlsLimitMacMoveLevel 
The value of the object sapTmplTlsLimitMacMoveLevel specifies the
hierarchy in which SAPs are blocked when a MAC-move limit is exceeded.
When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bind with the lower level is blocked first. (tertiary is
the lowest)

Context

MIB
TIMETRA-SAP-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.18
Type
column
Access
readwrite
Status
current
Parent
sapTmplTlsEntry
Table
sapTmplTlsTable
Siblings
17

Syntax

TIMETRA-SERV-MIBTlsLimitMacMoveLevel
Source
TIMETRA-SERV-MIBTlsLimitMacMoveLevel
Base type
Enumeration

Values & Constraints

Type Values
1primary
2secondary
3tertiary

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sapTmplTlsLastChanged
The value of sapTmplTlsLastChanged indicates the timestamp of last change to this row in sapTmplTlsTable.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.1
sapTmplTlsStpAdminPointToPoint
The value of the object sapTmplTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means t…
columnEnumeration.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.10
sapTmplTlsStpAutoEdge
sapTmplTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.11
sapTmplTlsDiscardUnknownSource
with the object sapTmplTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, pack…
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.12
sapTmplTlsL2ptTermination
The value of the object sapTmplTlsL2ptTermination specifies whether received Layer 2 Protocol Tunnel (L2PT) PDUs are terminated on this port or sap.
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.13
sapTmplTlsBpduTranslation
The value of the object sapTmplTlsBpduTranslation specifies whether received L2 Protocol Tunnel PDUs are translated before being sent out on this port or sap.
columnTIMETRA-SERV-MIBTlsBpduTranslation.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.14
sapTmplTlsStpRootGuard
The value of the object sapTmplTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.15
sapTmplTlsL2ptProtocols
The value of the object sapTmplTlsL2ptProtocols specifies which L2 Protocol Tunnel PDUs are terminated on this port or sap.
columnTIMETRA-SERV-MIBL2ptProtocols.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.16
sapTmplTlsLimitMacMove
When sapTmplTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the relearn rate specified by s…
columnTIMETRA-SERV-MIBTlsLimitMacMove.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.17
sapTmplTlsMacAgeing
The value of the object sapTmplTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP template. The value will be ignored if MAC aging is disabled on service…
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.2
sapTmplTlsStpAdminStatus
The value of the object sapTmplTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol.
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.3
sapTmplTlsStpPriority
The value of the object sapTmplTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated wit…
columnInteger32.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.4
sapTmplTlsStpPathCost
The value of the object sapTmplTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.
columnInteger32.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.5
sapTmplTlsStpRapidStart
The value of the object sapTmplTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on t…
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.6
sapTmplTlsStpBpduEncap
The value of the object sapTmplTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP.
columnEnumeration.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.7
sapTmplTlsMacAddressLimit
The value of the object sapTmplTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this S…
columnInteger32.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.8
sapTmplTlsMacLearning
The value of the object sapTmplTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service leve…
columnTIMETRA-TC-MIBTmnxEnabledDisabled.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.9