sapTlsRestProtSrcMacAction
TIMETRA-SAP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60
Object
column
r/w
Enumeration
The value of the object sapTlsRestProtSrcMacAction indicates the
action to take whenever a relearn request for a protected MAC is
received on a restricted SAP. When the value of this object is
'disable' the SAP will be placed in the operational down state, with
the operating flag 'recProtSrcMac' set.
When the value of this object is 'alarm-only', the SAP
will be left up and only a notification,
sapReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the SAP will start
discarding the frame in addition to generating sapReceivedProtSrcMac
notification.
Context
- MIB
- TIMETRA-SAP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sapTlsInfoEntry
- Table
- sapTlsInfoTable
- Siblings
- 99
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | alarm-only |
3 | discardFrame |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sapTlsStpAdminStatus The value of the object sapTlsStpAdminStatus specifies whether this
SAP participates in the TLS's Spanning Tree Protocol.
A SAP with a non-zero sapEthRingIndex does… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.1 |
| sapTlsStpForwardTransitions The value of the object sapTlsStpForwardTransitions indicates the
number of times this port has transitioned from the Learning state to
the Forwarding state. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.10 |
| sapTlsRestProtSrcMacOper The value of the object sapTlsRestProtSrcMacOper indicates the
operational state of the Restrict Protected Source MAC feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.100 |
| sapTlsRestProtSrcMacOperAct The value of the object sapTlsRestProtSrcMacOperAct indicates the
operation state of the Restrict Protected Source MAC action. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.101 |
| sapTlsStpInConfigBpdus The value of the object sapTlsStpInConfigBpdus indicates the number of
Configuration BPDUs received on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.11 |
| sapTlsStpInTcnBpdus The value of the object sapTlsStpInTcnBpdus indicates the
number of Topology Change Notification BPDUs received on
this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.12 |
| sapTlsStpInBadBpdus This object indicates the number of bad BPDUs received on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.13 |
| sapTlsStpOutConfigBpdus The value of the object sapTlsStpOutConfigBpdus indicates the number
of Configuration BPDUs sent out this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.14 |
| sapTlsStpOutTcnBpdus This object indicates the number of Topology Change Notification BPDUs
sent out this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.15 |
| sapTlsStpOperBpduEncap The value of the object sapTlsStpOperBpduEncap indicates
the operating encapsulation type used on BPDUs sent out
and received on this SAP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.16 |
| sapTlsVpnId The value of the object sapTlsVpnId indicates the VPN ID of the
associated service. | column | TIMETRA-SERV-MIBVpnId | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.17 |
| sapTlsCustId The Customer ID of the associated service. | column | TIMETRA-TC-MIBTmnxCustId | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.18 |
| sapTlsMacAddressLimit The value of the object sapTlsMacAddressLimit specifies the maximum
number of learned and static entries allowed in the FDB of this SAP.
The value 0 means: no limit for this SAP.
… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.19 |
| sapTlsStpPriority The value of the object sapTlsStpPriority specifies the value of the
port priority field which is contained in the most significant 4 bits
of the 16-bit Port ID associated with th… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.2 |
| sapTlsNumMacAddresses The value of the object sapTlsNumMacAddresses indicates
the number of MAC addresses currently present in the FDB
that belong to this SAP (Both learned and static MAC
addresses… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.20 |
| sapTlsNumStaticMacAddresses The value of the object sapTlsNumStaticMacAddresses indicates the
number of static MAC addresses currently present in the FDB that
belong to this SAP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.21 |
| sapTlsMacLearning The value of the object sapTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.22 |
| sapTlsMacAgeing The value of the object sapTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP. the value
is ignored if MAC aging is disabled on service level. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.23 |
| sapTlsStpOperEdge The value of the object sapTlsStpOperEdge indicates the operational
value of the Edge Port parameter. The object is initialized to the
value of sapTlsStpRapidStart and is set FALS… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.24 |
| sapTlsStpAdminPointToPoint The value of the object sapTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this sap. The value
'forceTrue' means that … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.25 |
| sapTlsStpPortRole sapTlsStpPortRole indicates the current role of the sap as defined by
the Rapid Spanning Tree Protocol. | column | TIMETRA-SERV-MIBStpPortRole | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.26 |
| sapTlsStpAutoEdge sapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge
detection as defined by Rapid Spanning Tree Protocol. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.27 |
| sapTlsStpOperProtocol sapTlsStpOperProtocol indicates whether stp, rstp or
mstp is running on this SAP. If the protocol is not
enabled on this SAP, the value notApplicable is
returned. | column | TIMETRA-SERV-MIBStpProtocol | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.28 |
| sapTlsStpInRstBpdus The value of the object sapTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs received on
this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.29 |
| sapTlsStpPortNum The value of the object sapTlsStpPortNum specifies the value of the
port number field which is contained in the least significant 12 bits
of the 16-bit Port ID associated with thi… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.3 |
| sapTlsStpOutRstBpdus The value of the object sapTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs sent out on
this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.30 |
| sapTlsLimitMacMove When sapTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the relearn rate
specified by svcTl… | column | TIMETRA-SERV-MIBTlsLimitMacMove | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.31 |
| sapTlsDhcpSnooping obsolete The value of the object sapTlsDhcpSnooping specifies whether or not
DHCP packets received on this SAP will be snooped. This object was
made obsolete in the 3.0 release. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.32 |
| sapTlsMacPinning The value of the object sapTlsMacPinning specifies whether or not MAC
address pinning is active on this SAP. The value will be set by
default to disabled. However for a SAP that b… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.33 |
| sapTlsDiscardUnknownSource with the object sapTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packets … | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.34 |
| sapTlsMvplsPruneState The value of sapTlsMvplsPruneState indicates the mVPLS prune state of
the SAP. The object will be set to notApplicable if the SAP is not
managed by a mVPLS. If the SAP is managed … | column | TIMETRA-SERV-MIBMvplsPruneState | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.35 |
| sapTlsMvplsMgmtService The value of sapTlsMvplsMgmtService indicates the service Id of the
service where the STP instance is running that is managing this SAP.
This object is only valid if sapTlsMvplsPr… | column | TIMETRA-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.36 |
| sapTlsMvplsMgmtPortId The value of sapTlsMvplsMgmtPortId indicates the SAP port Id of the
SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is
controlling this SAP. This object is only… | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.37 |
| sapTlsMvplsMgmtEncapValue The value of sapTlsMvplsMgmtEncapValue indicates the SAP Encap value
of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService
that is controlling this SAP. This object… | column | TIMETRA-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.38 |
| sapTlsArpReplyAgent The value of the object sapTlsArpReplyAgent specifies
the status of the special ARP response mechanism in the
system for ARP requests destined to static or dynamic hosts
associate… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.39 |
| sapTlsStpPathCost The value of the object sapTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port. | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.4 |
| sapTlsStpException The value of the object sapTlsStpException indicates whether an STP
exception condition is present on this Sap.
- none : no exception condition found.
- oneWayCommuniation : The n… | column | TIMETRA-SERV-MIBStpExceptionCondition | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.40 |
| sapTlsAuthenticationPolicy The value of the object sapTlsAuthenticationPolicy specifies
which subscriber authentication policy must be applied when
a DHCP msg is received on the interface. The authentic… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.41 |
| sapTlsL2ptTermination The value of the object sapTlsL2ptTermination specifies whether
received Layer 2 Protocol Tunnel (L2PT) PDUs are terminated on this
port or sap. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.42 |
| sapTlsBpduTranslation The value of the object sapTlsBpduTranslation specifies whether
received L2 Protocol Tunnel PDUs are translated before being sent out
on this port or sap. | column | TIMETRA-SERV-MIBTlsBpduTranslation | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.43 |
| sapTlsStpRootGuard The value of the object sapTlsStpRootGuard specifies whether this port
is allowed to become STP root port. It corresponds to the parameter
'restrictedRole' in 802.1Q. If set, it c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.44 |
| sapTlsStpInsideRegion The value of the object sapTlsStpInsideRegion indicates whether the
network connected to the SAP is in the same MST region. It corresponds
to the parameter 'infoInternal' in 802.1… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.45 |
| sapTlsEgressMcastGroup obsolete The value of the object sapTlsEgressMcastGroup specifies the Egress
Multicast Group this SAP belongs to. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.46 |
| sapTlsStpInMstBpdus The value of the object sapTlsStpInMstBpdus indicates the number of
Multiple Spanning Tree (MST) BPDUs received on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.47 |
| sapTlsStpOutMstBpdus The value of the object sapTlsStpOutMstBpdus indicates the number of
Multiple Spanning Tree (MST) BPDUs sent out on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.48 |
| sapTlsRestProtSrcMac The value of the object sapTlsRestProtSrcMac specifies how the agent
will handle relearn requests for protected MAC addresses. When the
value of this object is 'true' requests to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.49 |
| sapTlsStpRapidStart The value of the object sapTlsStpRapidStart specifies whether Rapid
Start is enabled on this SAP. When the value is 'enabled' the Spanning
Tree Protocol state transitions on this … | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.5 |
| sapTlsRestUnprotDstMac The value of the object sapTlsRestUnprotDstMac specifies how the
system will forward packets destined to an unprotected MAC address.
When the value of this object is 'true' packet… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.50 |
| sapTlsStpRxdDesigBridge The value of the object sapTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SAP. It identifies
which bridge is connecte… | column | TIMETRA-SERV-MIBBridgeId | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.51 |
| sapTlsStpRootGuardViolation The value of the object sapTlsStpRootGuardViolation indicates whether
there is a root-guard violation at the present time. This can only
happen when sapTlsStpRootGuard is set to t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.52 |
| sapTlsShcvAction The value of the object sapTlsShcvAction indicates whether any action
should be triggered when the connectivity check fails. | column | TIMETRA-TC-MIBTmnxSubShcvAction | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.53 |
| sapTlsShcvSrcIp The value of the object sapTlsShcvSrcIp specifies the source IP
address used when doing the connectivity check. The value 0.0.0.0
indicates that no host IP address is specified. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.54 |
| sapTlsShcvSrcMac The value of the object sapTlsShcvSrcMac specifies the MAC address
used when doing the connectivity check. The value 0:0:0:0:0:0
indicates that no host MAC address is specified. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.55 |
| sapTlsShcvInterval The value of the object sapTlsShcvInterval specifies the interval in
minutes between connectivity checks. Zero means no connectivity
checking. | column | minutes TIMETRA-TC-MIBTmnxSubShcvInterval | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.56 |
| sapTlsMvplsMgmtMsti The value of the object sapTlsMvplsMgmtMsti indicates the MST-instance
in the mVPLS instance specified in sapTlsMvplsMgmtService that is
controlling this SAP. A value of 0 indicat… | column | TIMETRA-SERV-MIBMstiInstanceIdOrZero | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.57 |
| sapTlsMacMoveNextUpTime The value of the object sapTlsMacMoveNextUpTime counts down the time
in seconds until a SAP that has been brought down due to exceeding the
TLS svcTlsMacMoveMaxRate, tmnxSapOperFl… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.58 |
| sapTlsMacMoveRateExcdLeft The value of the object sapTlsMacMoveRateExcdLeft counts down the
number of times this SAP can exceed the TLS svcTlsMacMoveMaxRate and
still be automatically brought up. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.59 |
| sapTlsStpBpduEncap The value of the object sapTlsStpBpduEncap specifies the type of
encapsulation used on BPDUs sent out and received on this SAP. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.6 |
| sapTlsL2ptForceBoundary The value of sapTlsL2ptForceBoundary specifies if
sapTlsL2ptTermination is enforced for its managed SAPs. Setting the
value of the object sapTlsL2ptForceBoundary of a SAP in a Man… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.61 |
| sapTlsLimitMacMoveLevel The value of the object sapTlsLimitMacMoveLevel specifies the
hierarchy in which SAPs are blocked when a MAC-move limit is exceeded.
When a MAC is moving among multiple SAPs or sp… | column | TIMETRA-SERV-MIBTlsLimitMacMoveLevel | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.62 |
| sapTlsBpduTransOper The value of the object sapTlsBpduTransOper indicates the operational
bpdu encapsulation used for BPDU translated frames. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.63 |
| sapTlsDefMsapPolicy The value of sapTlsDefMsapPolicy specifies the default Managed SAP
policy to use to create Managed SAPs when the response from the Radius
server does not specify a Managed SAP pol… | column | TIMETRA-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.64 |
| sapTlsL2ptProtocols The value of the object sapTlsL2ptProtocols specifies which L2
Protocol Tunnel PDUs are terminated on this port or sap. | column | TIMETRA-SERV-MIBL2ptProtocols | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.65 |
| sapTlsL2ptForceProtocols The value of the object sapTlsL2ptForceProtocols specifies which L2
Protocol Tunnel PDUs must be terminated by SAPs managed by this SAP.
This object is only relevant if the value … | column | TIMETRA-SERV-MIBL2ptProtocols | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.66 |
| sapTlsPppoeMsapTrigger The value of sapTlsPppoeMsapTrigger specifies whether the receipt of
PPPoE trigger packets on a VPLS SAP with a sapSubType value of
'capture' will result in a Radius authenticatio… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.67 |
| sapTlsDhcpMsapTrigger The value of sapTlsDhcpMsapTrigger specifies whether the receipt of
DHCP trigger packets on this VPLS SAP with a sapSubType value of
'capture' will result in a Radius authenticati… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.68 |
| sapTlsMrpJoinTime The value of sapTlsMrpJoinTime specifies a timer value in 10ths of
seconds which determines the maximum rate at which attribute join
messages can be sent on the SAP. | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.69 |
| sapTlsStpPortState The value of the object sapTlsStpPortState indicates the port's
current state as defined by application of the Spanning Tree Protocol.
This state controls what action a port takes… | column | TIMETRA-SERV-MIBTStpPortState | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.7 |
| sapTlsMrpLeaveTime The value of sapTlsMrpLeaveTime specifies a timer value in 10ths of
seconds which determines the amount of time a registered attribute is
held in leave state before the registrati… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.70 |
| sapTlsMrpLeaveAllTime The value of sapTlsMrpLeaveAllTime specifies the a timer value in
10ths of seconds which determines the frequency where all attribute
declarations on the SAP are all refreshed. | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.71 |
| sapTlsMrpPeriodicTime The value of sapTlsMrpPeriodicTime specifies a timer value in 10ths of
seconds which determines the frequency of retransmission of attribute
declarations. | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.72 |
| sapTlsMrpPeriodicEnabled The value of sapTlsMrpPeriodicEnabled specifies whether retransmission
of attribute declarations is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.73 |
| sapTlsPppoePolicy The value of sapTlsPppoePolicy specifies the PPPoE policy (defined in
TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs
via PPPoE with PAP/CHAP authentication.
… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.74 |
| sapTlsArpMsapTrigger The value of sapTlsArpMsapTrigger specifies whether the receipt of ARP
trigger packets on this VPLS SAP with a sapSubType value of 'capture'
will result in a Radius authentication… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.75 |
| sapTlsDefMsapService The value of sapTlsDefMsapService specifies the service ID of the
service where Managed SAPs are created when there is no Radius server
available, or the Radius server does not sp… | column | TIMETRA-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.76 |
| sapTlsDefMsapGroupIf The value of sapTlsDefMsapGroupIf specifies the name of the group
interface where Managed SAPs are created when there is no Radius
server available, or the Radius server does not … | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.77 |
| sapTlsMrpPolicy The value of sapTlsMrpPolicy specifies the mrp policy to control which
Group BMAC attributes will advertise on the egress SAP-SDP. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.78 |
| sapTlsSiteName The value of sapTlsSiteName indicates the site-name associated with
this SAP. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.79 |
| sapTlsStpDesignatedBridge The value of the object sapTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment. | column | TIMETRA-SERV-MIBBridgeId | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.8 |
| sapTlsDhcp6MsapTrigger The value of sapTlsDhcp6MsapTrigger specifies whether the receipt of
DHCPv6 trigger packets on this VPLS SAP with a sapSubType value of
'capture' will result in a Radius authentic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.80 |
| sapTlsShcvRetryTimeout The value of the object sapTlsShcvRetryTimeout specifies the timeout
in seconds before a connectivity check retransmission. | column | seconds TIMETRA-TC-MIBTmnxSubShcvRetryTimeout | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.81 |
| sapTlsShcvRetryCount The value of the object sapTlsShcvRetryCount specifies the number of
connectivity check retransmissions.
Setting the value to n specifies that, for any given host, … | column | TIMETRA-TC-MIBTmnxSubShcvRetryCount | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.82 |
| sapTlsDataSapInstStatus The value of sapTlsDataSapInstStatus indicates the status of the SAP
which is instantiating other SAPs controlled by this SAP.
This object is valid for services wit… | column | TmnxSapInstStatus | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.83 |
| sapTlsDataSapInstLastErr The value of sapTlsDataSapInstLastErr indicates last error encountered
while instantiating SAPs controlled by this SAP.
This object is valid for services with TIMET… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.84 |
| sapTlsMvrpAdminStatus The value of sapTlsMvrpAdminStatus specifies whether MVRP is enabled
on this SAP.
The default value of sapTlsMvrpAdminStatus is set to 'enabled' for
MVRP enabled se… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.85 |
| sapTlsMvrpOperStatus The value of sapTlsMvrpOperStatus indicates operational status of MVRP
on this SAP. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.86 |
| sapTlsInTcBitBpdus The value of the object sapTlsInTcBitBpdus indicates the
number of BPDUs received on this SAP
with the Topology Change bit set. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.87 |
| sapTlsOutTcBitBpdus The value of the object sapTlsOutTcBitBpdus indicates the
number of BPDUs sent out this SAP
with the Topology Change bit set. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.88 |
| sapTlsPppMsapTrigger The value of sapTlsPppMsapTrigger specifies whether the receipt of PPP
trigger packets on a VPLS SAP with a sapSubType value of 'capture'
will result in a Radius authentication th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.89 |
| sapTlsStpDesignatedPort The value of the object sapTlsStpDesignatedPort indicates the Port
Identifier of the port on the Designated Bridge for this port's
segment. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.9 |
| sapTlsPppPolicy The value of sapTlsPppPolicy specifies the policy (defined in
TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs
via PPP with PAP/CHAP authentication.
… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.90 |
| sapTlsTrackSrrpInst The value of sapTlsTrackSrrpInst specifies the SRRP instance to track. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.91 |
| sapTlsPppUserDb The value of sapTlsPppUserDb specifies the local user database to use
for PPP PAP/CHAP based authentication.
If no authentication with the local user database is re… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.92 |
| sapTlsPppoeUserDb The value of sapTlsPppoeUserDb specifies the local user database to
use for PPPoE PADI PAP/CHAP based authentication.
If no authentication with the local user datab… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.93 |
| sapTlsDhcpUserDb The value of sapTlsDhcpUserDb specifies the local user database to use
for DHCP based authentication.
If no authentication with the local user database is required,… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.94 |
| sapTlsAutoLearnMacProtect The value of sapTlsAutoLearnMacProtect specifies whether to enable
automatic population of the MAC protect list with source MAC addresses
learned on the associated SAP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.95 |
| sapTlsDhcp6UserDb The value of sapTlsDhcp6UserDb specifies the local user database to
use for DHCP6 based authentication.
If no authentication with the local user database is require… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.96 |
| sapTlsShcvPolicyIpv4 The value of sapTlsShcvPolicyIpv4 specifies the Subscriber Host
Connectivity Verification (SHCV) policy for IPv4 only.
A non empty value must correspond to a concep… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.98 |
| sapTlsDataMsapTrigger The value of sapTlsDataMsapTrigger specifies if the receipt of data
packets on a VPLS SAP with a sapSubType value of 'capture' will result
in a Radius authentication that will pro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.99 |