sapEgrQosQOverrideFlags
TIMETRA-SAP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4
Object
The value of sapEgrQosQOverrideFlags specifies the set of attributes
whose values have been overridden via management on this queue.
Clearing a given flag will return the corresponding overridden
attribute to the value defined on the SAP's ingress QoS policy.
The sapEgrQosQMonitorQueueDepth, sapEgrQosQFastPolling and
sapEgrQosQViolationThreshold objects are not set in
sapEgrQosQOverrideFlags when overridden on this queue and can not be
cleared using sapEgrQosQOverrideFlags flag.
Context
- MIB
- TIMETRA-SAP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sapEgrQosQueueInfoEntry
- Table
- sapEgrQosQueueInfoTable
- Siblings
- 29
Syntax
TIMETRA-SERV-MIBTQosQueueAttribute
- Source
- TIMETRA-SERV-MIBTQosQueueAttribute
- Base type
Bits
Values & Constraints
Type Values
0 | cbs |
1 | cir |
2 | cirAdaptRule |
3 | mbs |
4 | pir |
5 | pirAdaptRule |
6 | hiPrioOnly |
7 | avgOverhead |
8 | weight |
9 | cirWeight |
10 | pirPercent |
11 | cirPercent |
12 | drpTailLowReductnMbs |
13 | hsWrrWeight |
14 | hsClassWeight |
15 | hsWredQueue |
16 | burstLimit |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sapEgrQosQId The value of sapEgrQosQId indicates the ID of the queue whose
parameters are to be overridden. | column | TIMETRA-TC-MIBTEgressQueueId | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.1 |
| sapEgrQosQAdminPIR obsolete The value of sapEgrQosQAdminPIR specifies the desired PIR value for
this queue. This object is obsoleted in 15.0 release and has been
replaced with sapEgrQosQAdminPIRHi and sapEgr… | column | kilo bits per second TIMETRA-TC-MIBTQosQueuePIRRate | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.10 |
| sapEgrQosQAdminCIR obsolete The value of sapEgrQosQAdminCIR specifies the desired CIR value for
this queue. This object is obsoleted in 15.0 release and has been
replaced with sapEgrQosQAdminCIRHi and sapEgr… | column | kilo bits per second TIMETRA-TC-MIBTQosQueueCIRRate | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.11 |
| sapEgrQosQAvgOverhead The value of sapEgrQosQAvgOverhead specifies the encapsulation
overhead, in centipercent, used to translate packet-based rate to
frame-based rate and vice versa. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.12 |
| sapEgrQosQMBSBytes The value of sapEgrQosQMBSBytes specifies the maximum amount of buffer
space (in bytes) allowed for this queue. | column | bytes TIMETRA-TC-MIBTBurstSizeBytes | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.13 |
| sapEgrQosQWeight The value of sapEgrQosQWeight specifies the weight that needs to be
used by the scheduler to which this queue would be feeding. | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.14 |
| sapEgrQosQCIRWeight The value of sapEgrQosQCIRWeight specifies the weight that should be
assigned to this queue by the parent scheduler among all the entities
feeding into the parent, when the traffi… | column | TIMETRA-TC-MIBTWeight | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.15 |
| sapEgrQosQAdminPIRPercent The value of sapEgrQosQAdminPIRPercent specifies the desired PIR value
for this queue as a percentage. | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.16 |
| sapEgrQosQAdminCIRPercent The value of sapEgrQosQAdminCIRPercent specifies the desired CIR value
for this queue as a percentage. | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.17 |
| sapEgrQosQMonitorDepth The value of sapEgrQosQMonitorDepth specifies whether to enable queue
depth monitoring for this specified queue. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.18 |
| sapEgrQosQDrpTailLowReductnMbs The value of sapEgrQosQDrpTailLowReductnMbs specifies the percentage
at which low drop tail is being reduced from the MBS specified by
sapEgrQosQMBSBytes. | column | TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.19 |
| sapEgrQosQRowStatus The value of sapEgrQosQRowStatus controls the creation and deletion of
rows in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.2 |
| sapEgrQosQAdminPIRHi The value of sapEgrQosQAdminPIRHi specifies the upper 32 bits of the
desired PIR value for this queue.
This value should always be set along with sapEgrQosQAdminPIR… | column | kilo bits per second TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.20 |
| sapEgrQosQAdminPIRLo The value of sapEgrQosQAdminPIRLo specifies the lower 32 bits of the
desired PIR value for this queue.
This value should always be set along with sapEgrQosQAdminPIR… | column | kilo bits per second TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.21 |
| sapEgrQosQAdminCIRHi The value of sapEgrQosQAdminCIRHi specifies the upper 32 bits of the
desired CIR value for this queue.
This value should always be set along with sapEgrQosQAdminCIR… | column | kilo bits per second TIMETRA-TC-MIBTmnxQosRateHigh32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.22 |
| sapEgrQosQAdminCIRLo The value of sapEgrQosQAdminCIRLo specifies the lower 32 bits of the
desired CIR value for this queue.
This value should always be set along with sapEgrQosQAdminCIR… | column | kilo bits per second TIMETRA-TC-MIBTmnxQosRateLow32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.23 |
| sapEgrQosQHsWrrWeight The value of sapEgrQosQHsWrrWeight specifies the Weighted Round Robin
(WRR) weight which this queue should parent into the scheduler. The
weight of each queue determines how much … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.24 |
| sapEgrQosQHsClassWeight The value of sapEgrQosQHsClassWeight specifies the weight of the
scheduling class. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.25 |
| sapEgrQosQHsWredQSlopePlcy The value of sapEgrQosQHsWredQSlopePlcy specifies the name of the
slope policy. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.26 |
| sapEgrQosQBurstLimit The value of sapEgrQosQBurstLimit specifies the explicit shaping burst
size of a queue. | column | TIMETRA-TC-MIBTBurstLimit | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.27 |
| sapEgrQosQMonitorQueueDepth The value of sapEgrQosQMonitorQueueDepth specifies whether to enable
queue depth monitoring for this specified queue.
When overridden this object does not update sa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.28 |
| sapEgrQosQFastPolling The value of sapEgrQosQFastPolling indicates that the depth monitoring
should use the new Embedded Control Processor fast-polling.
When overridden this object does … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.29 |
| sapEgrQosQLastMgmtChange The value of sapEgrQosQLastMgmtChange indicates the value of sysUpTime
at the time of the last management change of any writable object of
this row. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.3 |
| sapEgrQosQViolationThreshold The value of sapEgrQosQViolationThreshold indicates percent of the
depth of the queue above which a violation is registered. This is
applicable to both the existing queue depth mo… | column | centipercent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.30 |
| sapEgrQosQCBS The value of sapEgrQosQCBS specifies the amount of reserved buffer
space (in kilobytes) for this queue. | column | kilobytes TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.5 |
| sapEgrQosQMBS obsolete The value of sapEgrQosQMBS specifies the maximum amount of buffer
space (in kilobytes) allowed for this queue. | column | kilobytes TIMETRA-TC-MIBTBurstSize | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.6 |
| sapEgrQosQHiPrioOnly obsolete The value of sapEgrQosQHiPrioOnly specifies the percentage of buffer
space for this queue, used exclusively by high priority packets.
This object is obsoleted in 15… | column | percent TIMETRA-TC-MIBTBurstPercentOrDefault | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.7 |
| sapEgrQosQCIRAdaptation The value of sapEgrQosQCIRAdaptation specifies the criteria to use to
compute the operational CIR value for this queue, while maintaining a
minimum offset. | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.8 |
| sapEgrQosQPIRAdaptation The value of sapEgrQosQPIRAdaptation specifies the criteria to use to
compute the operational PIR value for this queue, while maintaining a
minimum offset. | column | TIMETRA-TC-MIBTAdaptationRule | .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.9 |