tmnxOamLspTrCtlTestSubMode

TIMETRA-OAM-TEST-MIB · .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.15
Commands MIB view Table view

Object

column r/w TmnxOamLspTrTestSubMode 
The value of tmnxOamLspTrCtlTestSubMode specifies the type of LSP
trace route test to perform.
              
When this object is 'unspecified(1)', the type of LSP trace route test
to be performed is determined when the test is started, from the set
of tmnxOamLspTrCtlTable objects configured with non-default values.
              
If there is a mismatch between tmnxOamLspTrCtlTestSubMode and the
type of the LSP to be tested, the test will fail.  For example, if
tmnxOamLspTrCtlTestSubMode is 'static(2)', and
tmnxOamLspTrCtlLspName refers to an LSP with
TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test
will fail.
              
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause.

Context

MIB
TIMETRA-OAM-TEST-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.11.2.9.1.15
Type
column
Access
readwrite
Status
current
Default
unspecified
Parent
tmnxOamLspTrCtlEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OAM-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-TEST-MIB::tmnxOamLspTrCtlTestSubMode'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-OAM-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OAM-TEST-MIB::tmnxOamLspTrCtlTestSubMode.<tmnxOamTrCtlOwnerIndex>.<tmnxOamTrCtlTestIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-OAM-TEST-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-OAM-TEST-MIB::tmnxOamLspTrCtlTestSubMode'

Syntax

TmnxOamLspTrTestSubMode
Source
TmnxOamLspTrTestSubMode
Base type
Enumeration
Type Description
A value of type TmnxOamLspTrTestSubMode specifies the type of LSP
trace route test to perform.
          
LSP test types:
    static(2)
        Deprecated.
        Perform an LSP trace route test using the RFC 6426 'Target FEC
        Stack' code point 'Static LSP'.
    bgpLabeledPrefix(3)
        Perform an LSP trace route test using the RFC 4379
        'Target FEC Stack' code point 'BGP labeled IPv4 prefix'.  In
        future, 'bgpLabeledPrefix(3)' will also be used for the RFC
        4379 'Target FEC Stack' code point 'BGP labeled IPv6 prefix'.
    srIsis(4)
        Perform an LSP trace route test in the Segment Routing (SR)
        case, where the Interior Gateway Protocol (IGP) is
        Intermediate System to Intermediate System (IS-IS).
    srOspf(5)
        Perform an LSP trace route test in the Segment Routing (SR)
        case, where the Interior Gateway Protocol (IGP) is Open
        Shortest Path First (OSPF).
    srTe(6)
        Perform an LSP trace route test in the Segment Routing Traffic
        Engineering (SR-TE) case.
    srPolicy(7)
        Perform an LSP trace route test using a Segment Routing policy.
    srOspf3(8)
        Perform an LSP trace route test in the SR case, where the IGP
        is OSPFv3.
    unspecified(1)
        Perform any other supported type of LSP trace route
        test.  Examples:  an LSP ping or trace route test using the RFC
        4379 'Target FEC Stack' code point 'LDP IPv4 prefix'; an LSP
        ping or trace route test using the RFC 4379 'Target FEC Stack'
        code point 'RSVP IPv4 LSP'.

Values & Constraints

Type Values
1unspecified
2static
3bgpLabeledPrefix
4srIsis
5srOspf
6srTe
7srPolicy
8srOspf3

Conformance

Member of
tmnxOamTrGeneralV11v0Group