tmnxVRtIPsecTnlIpMtu
TIMETRA-IPSEC-MIB ·
.1.3.6.1.4.1.6527.3.1.2.48.106.1.26
Object
column
r/w
Unsigned32
The value of tmnxVRtIPsecTnlIpMtu specifies the MTU size for IP packets
for this tunnel.
A value set to zero indicates maximum supported MTU size on the SAP
for this tunnel.
Context
- MIB
- TIMETRA-IPSEC-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.48.106.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tmnxVRtIPsecTnlEntry
- Table
- tmnxVRtIPsecTnlTable
- Siblings
- 54
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 512-9000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxVRtIPsecTnlName The value of tmnxVRtIPsecTnlName specifies the name of this IPsec
tunnel. | column | TIMETRA-TC-MIBTNamedItem | .1.3.6.1.4.1.6527.3.1.2.48.106.1.1 |
| tmnxVRtIPsecTnlRemGwAddr The value of tmnxVRtIPsecTnlRemGwAddr specifies the address of the
interface on the remote node of this IPsec tunnel. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.48.106.1.10 |
| tmnxVRtIPsecTnlSecurityPolicyId The value of tmnxVRtIPsecTnlSecurityPolicyId specifies the IPsec
security policy entry in the tmnxIPsecPolicyTable that this tunnel
will use. | column | TmnxIPsecPolicyIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.11 |
| tmnxVRtIPsecTnlKeyingType The value of tmnxVRtIPsecTnlKeyingType specifies the keying type that
this tunnel will use. | column | TIMETRA-TC-MIBTmnxIPsecKeyingType | .1.3.6.1.4.1.6527.3.1.2.48.106.1.12 |
| tmnxVRtIPsecTnlDynTransformId1 The value of tmnxVRtIPsecTnlDynTransformId1 specifies the first IPsec
transform entry in the table tmnxIPsecTransformTable that this tunnel
will use. | column | TmnxIPsecTransformIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.13 |
| tmnxVRtIPsecTnlDynTransformId2 The value of tmnxVRtIPsecTnlDynTransformId2 specifies the second IPsec
transform entry in the table tmnxIPsecTransformTable that this tunnel
will use.
The value of … | column | TmnxIPsecTransformIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.14 |
| tmnxVRtIPsecTnlDynTransformId3 The value of tmnxVRtIPsecTnlDynTransformId3 specifies the third IPsec
transform entry in the table tmnxIPsecTransformTable that this tunnel
will use.
The value of t… | column | TmnxIPsecTransformIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.15 |
| tmnxVRtIPsecTnlDynTransformId4 The value of tmnxVRtIPsecTnlDynTransformId4 specifies the fourth IPsec
transform entry in the table tmnxIPsecTransformTable that this tunnel
will use.
The value of … | column | TmnxIPsecTransformIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.16 |
| tmnxVRtIPsecTnlIkePolicyId The object tmnxVRtIPsecTnlIkePolicyId specifies the IKE policy entry
that this tunnel will use.
The value of tmnxVRtIPsecTnlIkePolicyId is valid and greater than 0,… | column | TmnxIkePolicyIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.17 |
| tmnxVRtIPsecTnlIkePreSharedKey The value of tmnxVRtIPsecTnlIkePreSharedKey specifies the shared
secret between the two peers forming the tunnel.
The value of tmnxVRtIPsecTnlIkePreSharedKey is a v… | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.48.106.1.18 |
| tmnxVRtIPsecTnlOperFlags The value of tmnxVRtIPsecTnlOperFlags indicates the reason why the
tunnel is operationally down. | column | Bits | .1.3.6.1.4.1.6527.3.1.2.48.106.1.19 |
| tmnxVRtIPsecTnlRowStatus The value of tmnxVRtIPsecTnlRowStatus specifies the status of this
row. It is used to create and destroy rows in tmnxVRtIPsecTnlTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.48.106.1.2 |
| tmnxVRtIPsecTnlReplayWindow The value of tmnxVRtIPsecTnlReplayWindow specifies the size of the
anti-replay window.
If the value of tmnxVRtIPsecTnlReplayWindow is set to 0, then the
anti-replay… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.20 |
| tmnxVRtIPsecTnlAutoEstablish The value of tmnxVRtIPsecTnlAutoEstablish specifies whether to attempt
to establish a phase 1 exchange automatically. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.21 |
| tmnxVRtIPsecTnlBfdDesignate The value of tmnxVRtIPsecTnlBfdDesignate specifies whether this IPSec
tunnel is the BFD designated tunnel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.22 |
| tmnxVRtIPsecTnlLocalIdType The value of tmnxVRtIPsecTnlLocalIdType specifies the local identifier
type used for IDi or IDr for IKEv2.
An 'inconsistentValue' error is returned if this object i… | column | TmnxIPsecLocalIdType | .1.3.6.1.4.1.6527.3.1.2.48.106.1.23 |
| tmnxVRtIPsecTnlLocalIdValue The value of tmnxVRtIPsecTnlLocalIdValue specifies the value
associated with tmnxVRtIPsecTnlLocalIdType object.
Value is extracted from the configured certificate w… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6527.3.1.2.48.106.1.24 |
| tmnxVRtIPsecTnlClearDfBit The value of tmnxVRtIPsecTnlClearDfBit specifies whether to clear Do
not Fragment (DF) bit in the outgoing packets in this tunnel. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.25 |
| tmnxVRtIPsecTnlHostISA The value of tmnxVRtIPsecTnlHostISA indicates the active ISA MDA that
is being used to host this IPsec tunnel.
This object will contain a nonzero value only when th… | column | TIMETRA-CHASSIS-MIBTmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.27 |
| tmnxVRtIPsecTnlCSVPrimary The value of tmnxVRtIPsecTnlCSVPrimary specifies the primary method of
Certificate Status Verification (CSV) that is used to verify
revocation status of the certificate of the pee… | column | TmnxCertRevStatus | .1.3.6.1.4.1.6527.3.1.2.48.106.1.28 |
| tmnxVRtIPsecTnlCSVSecondary The value of tmnxVRtIPsecTnlCSVSecondary specifies the secondary
method of Certificate Status Verification (CSV) that is used to verify
revocation status of the certificate of the… | column | TmnxCertRevStatusOrNone | .1.3.6.1.4.1.6527.3.1.2.48.106.1.29 |
| tmnxVRtIPsecTnlLastChanged The value of tmnxVRtIPsecTnlLastChanged indicates the time, since
system startup, that the configuration of this row was created or
modified. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.48.106.1.3 |
| tmnxVRtIPsecTnlCSVDefResult The value of tmnxVRtIPsecTnlCSVDefResult specifies the default result
of Certificate Status Verification (CSV) when both primary and
secondary method failed to provide an answer. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.48.106.1.30 |
| tmnxVRtIPsecTnlCertProfile The value of tmnxVRtIPsecTnlCertProfile specifies the certificate
profile associated with this IPsec tunnel. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.48.106.1.31 |
| tmnxVRtIPsecTnlMatchTrustAnchor The value of tmnxVRtIPsecTnlMatchTrustAnchor indicates the name for
matched Certificate-Authority Profile name associated with this SAP
IPSec tunnel certificate. | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.48.106.1.32 |
| tmnxVRtIPsecTnlCertTrstAnchrProf The value of tmnxVRtIPsecTnlCertTrstAnchrProf specifies the name for
Certificate-Authority Trust Anchor Profile name associated with this
SAP IPSec tunnel certificate.
… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.48.106.1.33 |
| tmnxVRtIPsecTnlEncapIpMtu The value of tmnxVRtIPsecTnlEncapIpMtu specifies the MTU size for IP
packets after tunnel encapsulation has been added.
A value set to zero indicates maximum suppor… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.34 |
| tmnxVRtIPsecTnlPropagateIpv6PMTU The value of tmnxVRtIPsecTnlPropagateIpv6PMTU specifies whether or not
to propagate a path MTU to IPv6 hosts. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.35 |
| tmnxVRtIPsecTnlIcmp6Pkt2Big The value of tmnxVRtIPsecTnlIcmp6Pkt2Big specifies whether
packet-too-big ICMP messages should be sent. When it is set to 'true',
ICMPv6 packet-too-big messages are generated by t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.36 |
| tmnxVRtIPsecTnlIcmp6NumPkt2Big The value of tmnxVRtIPsecTnlIcmp6NumPkt2Big specifies how many
packet-too-big ICMPv6 messages are transmitted in the time frame
specified by tmnxVRtIPsecTnlIcmp6Pkt2BigTime.
… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.37 |
| tmnxVRtIPsecTnlIcmp6Pkt2BigTime The value of tmnxVRtIPsecTnlIcmp6Pkt2BigTime specifies the time frame
in seconds that is used to limit the number of packet-too-big ICMPv6
messages transmitted per time frame.
… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.38 |
| tmnxVRtIPsecTnlOperChanged The value of tmnxVRtIPsecTnlOperChanged indicates the sysUpTime at the
time of the last operational status change of this entry. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.48.106.1.39 |
| tmnxVRtIPsecTnlAdminState The value of tmnxVRtIPsecTnlAdminState specifies the administrative
state of the tmnxVRtIPsecTnlEntry. | column | TIMETRA-TC-MIBTmnxAdminState | .1.3.6.1.4.1.6527.3.1.2.48.106.1.4 |
| tmnxVRtIPsecTnlPropagateIpv4PMTU The value of tmnxVRtIPsecTnlPropagateIpv4PMTU specifies whether or not
to propagate a path MTU to IPv4 hosts. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.40 |
| tmnxVRtIPsecTnlIcmpFragReq The value of tmnxVRtIPsecTnlIcmpFragReq specifies whether or not
'Fragmentation required and DF flag set' ICMP messages should be sent.
When it is set to 'true (1)', the ICMP mess… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.41 |
| tmnxVRtIPsecTnlIcmpFragReqNum The value of tmnxVRtIPsecTnlIcmpFragReqNum specifies how many
'Fragmentation required and DF flag set' ICMP messages are transmitted
in the time frame specified by tmnxVRtIPsecTnl… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.42 |
| tmnxVRtIPsecTnlIcmpFragReqTime The value of tmnxVRtIPsecTnlIcmpFragReqTime specifies the time frame
in seconds that is used to limit the number of 'Fragmentation required
and DF flag set' ICMP messages transmit… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.43 |
| tmnxVRtIPsecTnlPMTUDiscoverAging The value of tmnxVRtIPsecTnlPMTUDiscoverAging specifies the number of
seconds used to age out the learned MTU, which is obtained through
path MTU discovery. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.44 |
| tmnxVRtIPsecTnlPubTcpMssAdjust The value of tmnxVRtIPsecTnlPubTcpMssAdjust specifies the Maximum
Segment Size (MSS) for the TCP traffic in an IPsec tunnel which is
sent from the public network to the private ne… | column | octets Integer32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.45 |
| tmnxVRtIPsecTnlPrivTcpMssAdjust The value of tmnxVRtIPsecTnlPrivTcpMssAdjust specifies the Maximum
Segment Size (MSS) for the TCP traffic in an IPsec tunnel which is
sent from the private network to the public n… | column | octets Integer32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.46 |
| tmnxVRtIPsecTnlMaxNumPh1SaKeys The value of tmnxVRtIPsecTnlMaxNumPh1SaKeys specifies the maximum
number of security association (SA) phase 1 keys, which can be saved
by the system, for this IPsec tunnel. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.47 |
| tmnxVRtIPsecTnlMaxNumPh2SaKeys The value of tmnxVRtIPsecTnlMaxNumPh2SaKeys specifies the maximum
number of security association (SA) phase 2 keys, which can be saved
by the system, for this IPsec tunnel. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.48 |
| tmnxVRtIPsecTnlSecPlyStrictMatch The value of tmnxVRtIPsecTnlSecPlyStrictMatch specifies whether or not
the system does a strict match when it receives a CREATE_CHILD
exchange request, which is not for rekey, for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.106.1.49 |
| tmnxVRtIPsecTnlOperState The value of tmnxVRtIPsecTnlOperState indicates the operational status
of tmnxVRtIPsecTnlEntry. | column | TmnxIPsecOperState | .1.3.6.1.4.1.6527.3.1.2.48.106.1.5 |
| tmnxVRtIPsecTnlPrivateSvcName The value of tmnxVRtIPsecTnlPrivateSvcName specifies the private
service name of this tunnel.
The value of this object can only be specified during the row
creation. | column | TIMETRA-TC-MIBTLNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.48.106.1.50 |
| tmnxVRtIPsecTnlPrivSap The value of tmnxVRtIPsecTnlPrivSap specifies the SAP encapsulation
value of this tunnel.
This object must be specified a value during the row creation. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.106.1.51 |
| tmnxVRtIPsecTnlLclGwAddrOvrdType The value of tmnxVRtIPsecTnlLclGwAddrOvrdType specifies the address
type of address in tmnxVRtIPsecTnlLclGwAddrOvrd. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.48.106.1.52 |
| tmnxVRtIPsecTnlLclGwAddrOvrd The value of tmnxVRtIPsecTnlLclGwAddrOvrd specifies the local IPsec
tunnel endpoint that overrides the secured interface default source
address. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.48.106.1.53 |
| tmnxVRtIPsecTnlHostEsa The value of tmnxVRtIPsecTnlHostEsa indicates the active ESA that is
being used to host this IPsec tunnel.
This object will contain a nonzero value only when the tu… | column | TIMETRA-CHASSIS-MIBTmnxEsaIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.54 |
| tmnxVRtIPsecTnlHostEsaVm The value of tmnxVRtIPsecTnlHostEsaVm indicates the active ESA virtual
machine that is being used to host this IPsec tunnel.
This object will contain a nonzero valu… | column | TIMETRA-CHASSIS-MIBTmnxEsaVmIdOrZero | .1.3.6.1.4.1.6527.3.1.2.48.106.1.55 |
| tmnxVRtIPsecTnlDescription The value of tmnxVRtIPsecTnlDescription specifies the user-provided
description for this entry. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.48.106.1.6 |
| tmnxVRtIPsecTnlLclGwAddrType The value of tmnxVRtIPsecTnlLclGwAddrType specifies the address type
of address in tmnxVRtIPsecTnlLclGwAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.48.106.1.7 |
| tmnxVRtIPsecTnlLclGwAddr The value of tmnxVRtIPsecTnlLclGwAddr specifies the address of the
interface on the local node of this IPsec tunnel. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.48.106.1.8 |
| tmnxVRtIPsecTnlRemGwAddrType The value of tmnxVRtIPsecTnlRemGwAddrType specifies the address type
of address in tmnxVRtIPsecTnlRemGwAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6527.3.1.2.48.106.1.9 |