tmnxIkePolicyNatTKeepAliveIntvl
TIMETRA-IPSEC-MIB ·
.1.3.6.1.4.1.6527.3.1.2.48.4.1.14
Object
column
r/w
seconds Unsigned32
The value of tmnxIkePolicyNatTKeepAliveIntvl specifies the keep alive interval for NAT-T. If the value of tmnxIkePolicyNatTKeepAliveIntvl is '0', then keepalives are disabled.
Context
- MIB
- TIMETRA-IPSEC-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.48.4.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- tmnxIkePolicyEntry
- Table
- tmnxIkePolicyTable
- Siblings
- 36
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 120-600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxIkePolicyId The value of tmnxIkePolicyId specifies the id of a policy entry and is
the primary index for the table tmnxIkePolicyTable. | column | TmnxIkePolicyId | .1.3.6.1.4.1.6527.3.1.2.48.4.1.1 |
| tmnxIkePolicyEncrAlgorithm obsolete The value of tmnxIkePolicyEncrAlgorithm specifies the Encryption
algorithm to be used in the phase 1 SA.
This object has been marked obsolete in SROS Release 15.0. … | column | TIMETRA-TC-MIBTmnxEncrAlgorithm | .1.3.6.1.4.1.6527.3.1.2.48.4.1.10 |
| tmnxIkePolicyIsakmpLifeTime obsolete The value of tmnxIkePolicyIsakmpLifeTime specifies the lifetime of the
phase 1 IKE key.
ISAKMP stands for Internet Security Association and Key Management
Protocol.… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.11 |
| tmnxIkePolicyIPsecLifeTime The value of tmnxIkePolicyIPsecLifeTime specifies the lifetime of the
phase 2 IKE key. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.12 |
| tmnxIkePolicyNatTraversal The value of tmnxIkePolicyNatTraversal specifies whether NAT-T(network
address translation traversal) is 'enabled', 'disabled' or in 'forced'
mode. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.48.4.1.13 |
| tmnxIkePolicyNatTBehindNatOnly The value of tmnxIkePolicyNatTBehindNatOnly specifies whether the keep
alive packets should be sent only when behind a NAT. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.4.1.15 |
| tmnxIkePolicyDpd The value of tmnxIkePolicyDpd specifies whether DPD (dead peer
detection) is 'enable', 'disable' or in 'replyOnly' mode.
The DPD vendor ID is always advertised to t… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.48.4.1.16 |
| tmnxIkePolicyDpdInterval The value of tmnxIkePolicyDpdInterval specifies the dead peer
detection interval. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.17 |
| tmnxIkePolicyDpdMaxRetries The value of tmnxIkePolicyDpdMaxRetries specifies the number of
retries done before the peer is determined dead. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.18 |
| tmnxIkePolicyAuthMethod The value of tmnxIkePolicyAuthMethod specifies the authentication
method used with this IKE policy for the remote-peer. | column | TIMETRA-TC-MIBTmnxIkePolicyAuthMethod | .1.3.6.1.4.1.6527.3.1.2.48.4.1.19 |
| tmnxIkePolicyRowStatus The tmnxIkePolicyRowStatus object is used to create and delete rows in
the tmnxIkePolicyTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.48.4.1.2 |
| tmnxIkePolicyIkeVersion The value of tmnxIkePolicyIkeVersion specifies the IKE version to be
used with this IKE policy. | column | TmnxIkeVersion | .1.3.6.1.4.1.6527.3.1.2.48.4.1.20 |
| tmnxIkePolicyOwnAuthMethod The value of tmnxIkePolicyOwnAuthMethod specifies the authentication
method used with this IKE policy on its own side. | column | TIMETRA-TC-MIBTmnxIkePolicyOwnAuthMethod | .1.3.6.1.4.1.6527.3.1.2.48.4.1.21 |
| tmnxIkePolicyMatchPeerToCert The value of tmnxIkePolicyMatchPeerToCert specifies whether to enable
checking that the IKE peer's ID matches the peer's certificate when
performing certificate authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.4.1.22 |
| tmnxIkePolicyRelayUnSolCfgAttr The value of tmnxIkePolicyRelayUnSolCfgAttr specifies the unsolicited
configuration attributes for IKEv2 remote-access tunnels. These
attributes, when provided by the authenticati… | column | TmnxIkePolicyRelayUnSolCfgAttr | .1.3.6.1.4.1.6527.3.1.2.48.4.1.23 |
| tmnxIkePolicyAutoEapMethod The value of tmnxIkePolicyAutoEapMethod specifies the automatic
EAP fallback authentication method for the remote-peer used with
this IKE policy. This object is only meaningful w… | column | TIMETRA-TC-MIBTmnxIkePolicyAutoEapMethod | .1.3.6.1.4.1.6527.3.1.2.48.4.1.24 |
| tmnxIkePolicyAutoEapOwnMethod The value of tmnxIkePolicyAutoEapOwnMethod specifies the automatic EAP
fallback authentication method used with this IKE policy on its own
side.
This object is only… | column | TIMETRA-TC-MIBTmnxIkePolicyAutoEapOwnMethod | .1.3.6.1.4.1.6527.3.1.2.48.4.1.25 |
| tmnxIkePolicyLockout The value of tmnxIkePolicyLockout specifies whether or not the IPsec
Client Lockout is enabled.
The statistics information of remote lockout clients are in
tmnxIPse… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.48.4.1.26 |
| tmnxIkePolicyLockoutFailedAtempt The value of tmnxIkePolicyLockoutFailedAtempt specifies the maximum
number of consecutive failed authentication attempts from the same
remote client. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.27 |
| tmnxIkePolicyLockoutDuration The value of tmnxIkePolicyLockoutDuration specifies the maximum
duration in minutes that the system can afford
tmnxIkePolicyLockoutFailedAtempt number of failed authentication
att… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.28 |
| tmnxIkePolicyLockoutBlock The value of tmnxIkePolicyLockoutBlock specifies the maximum time
period that the system drops IKE packets after the maximum number of
consecutive failed authentication attempts r… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.29 |
| tmnxIkePolicyLastChanged The value of tmnxIkePolicyLastChanged indicates the sysUpTime at the
time of the last modification of this entry.
If no changes were made to the entry since the las… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.48.4.1.3 |
| tmnxIkePolicyLockoutMaxPortPerIp The value of tmnxIkePolicyLockoutMaxPortPerIp specifies the maximum
number of port that can be lockout under the same IP address. Once the
number of lockout port under the same IP… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.30 |
| tmnxIkePolicyV2Fragment The value of tmnxIkePolicyV2Fragment specifies whether or not IKEv2
fragmentation is enabled. | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.48.4.1.31 |
| tmnxIkePolicyV2FragmentMtu The value of tmnxIkePolicyV2FragmentMtu specifies the MTU size for the
IKEv2 fragmentation. | column | octets Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.32 |
| tmnxIkePolicyV2FragReassembTmOut The value of tmnxIkePolicyV2FragReassembTmOut specifies the maximum
number of seconds to wait to receive all fragments of an IKEv2 message
for reassembly. | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.33 |
| tmnxIkePolicySndIdrAftEapSuccess The value of tmnxIkePolicySndIdrAftEapSuccess specifies whether or not
the system adds the Identification Responder (IDr) payload in the last
IKE authentication response after the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.4.1.34 |
| tmnxIkePolicyIkev1Ph1RespDelNtfy The value of tmnxIkePolicyIkev1Ph1RespDelNtfy specifies whether or not
the system, when deleting an IKEv1 phase 1 for which it was the
responder, sends a delete notification to th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.4.1.35 |
| tmnxIkePolicyLimitInitExchange The value of tmnxIkePolicyLimitInitExchange specifies whether or not
the system limits the number of in-progress initial IKE exchanges to
one per IPsec tunnel.
The … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.4.1.36 |
| tmnxIkePolicyReducedMaxExchgTt The value of tmnxIkePolicyReducedMaxExchgTt specifies the maximum
timeout for the in-progress initial IKE exchange.
The value of '0' specifies that there is no redu… | column | seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.48.4.1.37 |
| tmnxIkePolicyDescription The value of tmnxIkePolicyDescription specifies the user-provided
description for each tmnxIkePolicyEntry in the table
tmnxIkePolicyTable. | column | TIMETRA-TC-MIBTItemDescription | .1.3.6.1.4.1.6527.3.1.2.48.4.1.4 |
| tmnxIkePolicyIkeMode The value of tmnxIkePolicyIkeMode specifies the mode of operation,
which determines the number of messages used to establish the session. | column | TmnxIkePolicyIkeMode | .1.3.6.1.4.1.6527.3.1.2.48.4.1.5 |
| tmnxIkePolicyDHGroup obsolete The value of tmnxIkePolicyDHGroup specifies the Diffie-Hellman group
to be used for calculating session keys which will be used in the IKE
proposal.
This object has… | column | TmnxIkePolicyDHGroup | .1.3.6.1.4.1.6527.3.1.2.48.4.1.6 |
| tmnxIkePolicyPFSEnabled The value of tmnxIkePolicyPFSEnabled specifies whether
PFS (perfect forward secrecy) on the tunnel using this policy
is enabled or not. When tmnxIkePolicyPFSDHGroup has a value
o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.48.4.1.7 |
| tmnxIkePolicyPFSDHGroup The value of tmnxIkePolicyPFSDHGroup is used only if the value of the
tmnxIkePolicyPFSEnabled is 'true'.
The value of tmnxIkePolicyPFSDHGroup specifies the new
Diff… | column | TmnxIkePolicyDHGroup | .1.3.6.1.4.1.6527.3.1.2.48.4.1.8 |
| tmnxIkePolicyAuthAlgorithm obsolete The value of tmnxIkePolicyAuthAlgorithm specifies the Hashing
algorithm used in the phase 1 SA.
This object has been marked obsolete in SROS Release 15.0. The
funct… | column | TIMETRA-TC-MIBTmnxAuthAlgorithm | .1.3.6.1.4.1.6527.3.1.2.48.4.1.9 |