tmnxDot1agCfmMepFacilityIfIndex

TIMETRA-IEEE8021-CFM-MIB · .1.3.6.1.4.1.6527.3.1.2.52.7.1.1.25
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
The value of tmnxDot1agCfmMepFacilityIfIndex specifies, along with
tmnxDot1agCfmMepFacilityVlanId and tmnxDot1agCfmMepFacilityType, the
port or interface associated with this MEP.
              
The tmnxDot1agCfmMepFacilityIfIndex is applicable to facility MEPs
only, and MUST be set to zero (0) when dot1agCfmMepIfIndex,
dot1agCfmMepPrimaryVid, tmnxDot1agCfmMepSdpId, tmnxDot1agCfmMepVcId,
or tmnxDot1agCfmMepSvcId is non-zero. When this object is applicable
(non-zero), the above objects MUST be set to zero (0).
              
Once set, this object can not be modified.

Context

MIB
TIMETRA-IEEE8021-CFM-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.52.7.1.1.25
Type
column
Access
readwrite
Status
current
Parent
tmnxDot1agCfmMepEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-IEEE8021-CFM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepFacilityIfIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-IEEE8021-CFM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepFacilityIfIndex.<index>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-IEEE8021-CFM-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMepFacilityIfIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647

Conformance

Member of
tmnxDot1agCfmMepGroupV9v0