tIPvXFltrEntryActEsi

TIMETRA-FILTER-MIB · .1.3.6.1.4.1.6527.3.1.2.21.85.1.29
Commands MIB view Table view

Object

column r/w TFilterEsi 
The value of the object tIPvXFltrEntryActEsi specifies the ethernet
segment identifier (ESI) of the first ESI identified appliance in
Nuage service chain. When the value of tMacFilterParamsAction is
'forwardEsiL2' or 'forwardEsiL3' packets matching the filter entry are
forwarded to the appliance using EVPN-resolved VXLAN tunnel in the
specified VPLS/VPRN service
(tIPvXFltrEntryActFwdEsiSvcId/tIPvXFltrEntryActFwdEsiVRtrId).
              
The value '0' indicates that there is no ESI specified.
              
There are two options how to set the value of tIPvXFltrEntryActEsi:
1. Non zero value of tIPvXFltrEntryActEsi is set together
   with non zero values of tIPvXFltrEntryActFwdEsiVRtrId,
   tIPvXFltrEntryActFwdEsiSFIpType and tIPvXFltrEntryActFwdEsiSFIp.
   In this case value of tIPvXFltrEntryActAction is set to
   'forwardEsiL3' by the system.
              
2. Non zero value of tIPvXFltrEntryActEsi is set together with a non
   zero value of tIPvXFltrEntryActFwdEsiSvcId. In this case value of
   tIPvXFltrEntryActAction is set to 'forwardEsiL2' by the system.
              
Note that the value of tIPvXFltrEntryActEsi is silently cleared by the
system if the value of tIPvXFltrEntryActAction is set to any value
other than 'forwardEsiL2' or 'forwardEsiL3'.

Context

MIB
TIMETRA-FILTER-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.21.85.1.29
Type
column
Access
readwrite
Status
current
Default
0x00000000000000000000
Parent
tIPvXFltrEntryActionEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tIPvXFltrEntryActEsi'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tIPvXFltrEntryActEsi.<tIPvXFltrEntryActFltrType>.<tIPvXFltrEntryActFltrId>.<tIPvXFltrEntryActEntryId>.<tIPvXFltrEntryActActionId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-FILTER-MIB::tIPvXFltrEntryActEsi'

Syntax

TFilterEsi
Source
TFilterEsi
Base type
OctetString
Type Description
Ethernet Segment Identifier (ESI) as defined in IETF draft
BGP MPLS Based Ethernet VPN. ESI is a unique non-zero identifier that
identifies an Ethernet Segment. ESI is encoded as a ten octets integer
in line format with the most significant octet sent first.
The following two ESI values are reserved:
    - ESI 0 denotes a single-homed CE.
    - ESI 0xFF repeated 10 times is known as MAX-ESI.
          
In a network with managed and not-managed CEs, the ESI has the
following format:
          
             +---+---+---+---+---+---+---+---+---+---+
             | T |          ESI Value                |
             +---+---+---+---+---+---+---+---+---+---+
          
 Where:
 T (ESI Type) is a 1-octet field (most significant octet) that
 specifies the format of the remaining nine octets (ESI Value).
 ESI type can be one of the values 0x00-0x05.

Values & Constraints

Type Constraints
range: 10

Conformance

Member of
tFilterIPvXRedActionV24v0Group tFilterIPvXRedundantActionGroup