tIPv6FilterParamsIpSelector

TIMETRA-FILTER-MIB · .1.3.6.1.4.1.6527.3.1.2.21.19.1.61
Commands MIB view Table view

Object

column r/w TFltrMatchIpSelector 
The value of the object tIPv6FilterParamsIpSelector specifies how the
source address objects (tIPv6FilterParamsSourceIpAddr,
tIPv6FilterParamsSourceIpMask, tIPv6FilterParamsSrcIpFullMask,
tIPv6FilterParamsSrcIpPrefixList) and destination address objects
(tIPv6FilterParamsSourceIpAddr, tIPv6FilterParamsSourceIpMask,
tIPv6FilterParamsDstIpFullMask, tIPv6FilterParamsDstIpPrefixList) are
combined to form the filter match criterion. See description of
TFltrMatchIpSelector.

Context

MIB
TIMETRA-FILTER-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.21.19.1.61
Type
column
Access
readwrite
Status
current
Default
and-ip
Parent
tIPv6FilterParamsEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tIPv6FilterParamsIpSelector'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tIPv6FilterParamsIpSelector.<tIPv6FilterId>.<tIPv6FilterParamsIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-FILTER-MIB::tIPv6FilterParamsIpSelector'

Syntax

TFltrMatchIpSelector
Source
TFltrMatchIpSelector
Base type
Enumeration
Type Description
This textual convention specifies how the source ip and
destination ip filter objects are combined to form the filter match
criterion.
- If the selector takes the value and-ip(0) then the source address
  and destination address objects (if set) are combined into 1 filter
  condition that fires if both conditions are met (i.e. a logical
  and-operation of both is done). If one of them is not set (default
  values) then only the other one is taken into account for the match
  condition.
- If the selector takes the value or-ip(1) then the source ip
  objects are used as match condition for either source ip or
  destination ip (i.e. a logical or-operation is done). In this case,
  non-default values must be set for the source address objects. In this
  case the destination address objects are (silently) copied from the
  source address objects by the system; any other values set by the user
  are overwritten by the system.

Values & Constraints

Type Values
0and-ip
1or-ip

Conformance

Member of
tFltrMatchSrcOrDstIpGroup