tFilterSystemFilterId

TIMETRA-FILTER-MIB · .1.3.6.1.4.1.6527.3.1.2.21.69.1.2
Commands MIB view Table view

Object

column TConfigOrVsdFilterID 
The value of the object tFilterSystemFilterId specifies the ID of the
filter policy to be selected as the active system filter policy.
Values outside of range 1..65535 are reserved for entries dynamically
created by the system and cannot be used in any SNMP SET operation.
              
If the value of the object tFilterSystemFilterType is
'fltrtypeselIp(1)' then the filter policy with the specified ID must
exist in tIPFilterTable and must have scope 'system(4)' configured as
the value of the object tIPFilterScope.
              
If the value of the object tFilterSystemFilterType is
'fltrtypeselIpv6(4)' then the filter policy with the specified ID must
exist in tIPv6FilterTable and must have scope 'system(4)' configured
as the value of the object tIPv6FilterScope.

Context

MIB
TIMETRA-FILTER-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.21.69.1.2
Type
column
Access
noaccess
Status
current
Parent
tFilterSystemFilterEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tFilterSystemFilterId'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tFilterSystemFilterId.<tFilterSystemFilterType>.<tFilterSystemFilterId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-FILTER-MIB::tFilterSystemFilterId'

Syntax

TConfigOrVsdFilterID
Source
TConfigOrVsdFilterID
Base type
Unsigned32
Type Description
The identification number of a filter. Any value greater than
0x0000FFFF (65535) indicates a filter that was dynamically created
(auto-generated) by the system and as such cannot be used as part of
any SNMP SET operation.
          
- The range 0x00000001 .. 0x0000FFFF (1 .. 65535)
  indicates a regular configuration originated filter.
          
- The range 0x04000001 .. 0x0400FFFF (67108865 .. 67174399)
  indicates a filter managed by a VSD controller. In this case
  the last 16 bits indicate the ID of the VSD filter.
          
- The value 0 indicates an invalid filter-id (e.g. no filter applied
  on a particular endpoint).

Values & Constraints

Type Constraints
range: 0..65535 range: 67108865..67174399