tFilterEmbedFlowspecEmbFltrId – TIMETRA-FILTER-MIB

Object

column TAnyFilterID

The value of tFilterEmbedFlowspecEmbFltrId indicates the ID of the
auto-created embedded filter for flowspec rules that is used as the
source of embedded entries.

Context

MIB: TIMETRA-FILTER-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.21.94.1.1
Type: column
Access: noaccess
Status: current
Parent: tFilterEmbFlowspecEntryInfoEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tFilterEmbedFlowspecEmbFltrId'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-FILTER-MIB::tFilterEmbedFlowspecEmbFltrId.<tFilterEmbedFlowspecFilterType>.<tFilterEmbedFlowspecInsertFltrId>.<tFilterEmbedFlowspecEmbFltrId>.<tFilterEmbedFlowspecEmbEntryId>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-FILTER-MIB::tFilterEmbedFlowspecEmbFltrId'

Syntax

TAnyFilterID

Source: TAnyFilterID
Base type: Unsigned32

Type Description

Represents a filter Id. Any value greater than 65535 indicates a
filter that was created (auto-generated) by the system.
          
- The range 0x01000000 through 0x0100FFFF indicates a filter used for
  BGP Flow-Spec. In this case, the last 15 bits indicate the value of
  the vRtrID where the filter is active. Values higher than 0x01008000
  represent flowspec group filters.
          
- The range 0x03000000 through 0x0300FFFF indicates a filter used for
  Open-Flow.
          
- The range 0x20000000 .. 0x3FFFFFFF is used for handling filter rules
  (received from RADIUS) that are to be shared between users. The Id
  is encoded as follows:
  - the highest 3 bits (0b001) indicate that it is an auto-generated
    shared filter
  - the subsequent 13 bits indicate which combination of filter rules
    are inserted; this corresponds to the second number in the filter
    Id as displayed in CLI: the '1' in the example '9:1'
  - the subsequent 16 bits indicate the base filter Id; this
    corresponds to the first number ('9') in  '9:1'
          
- The range 0x10000000 .. 0x1FFFFFFF is used for handling filter
  flow-rules (received from DIAMETER) that are to be shared between
  users. The Id is encoded as follows:
  - the highest 4 bits (0b0001) indicate that it is an auto-generated
    flow-rule filter
  - the subsequent 12 bits indicate which combination of flow-rules are
    inserted; this corresponds to the second number in the filter Id as
    displayed in CLI: the '2' in the example '9:P2'
  - the subsequent 16 bits indicate the base filter Id; this
    corresponds to the first number ('9') in the example '9:P2'
          
- The range 0x04000001 .. 0x0400FFFF (67108865..67174399)
  indicates a filter managed by a VSD controller. In this case
  the last 16 bits indicate the ID of the VSD filter.

Values & Constraints

No enumerated values or constraints recorded.