tmnxSyncIfTimingPTPAlarm
TIMETRA-CHASSIS-MIB ·
.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.58
Object
column
TmnxSETSRefAlarm
The value of tmnxSyncIfTimingPTPAlarm indicates the alarms on the Precision Timing Protocol (PTP) reference. If any of the bits is set to '1', then the PTP reference is disqualified by the timing subsystem and the value of tmnxSyncIfTimingPTPQualified is set to 'not-qualified'. los - loss of signal oof - out of frequency range oopir - out of pull in range
Context
- MIB
- TIMETRA-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.58- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tmnxSyncIfTimingEntry
- Table
- tmnxSyncIfTimingTable
- Siblings
- 92
Syntax
TmnxSETSRefAlarm
- Source
- TmnxSETSRefAlarm
- Base type
Bits
Values & Constraints
Type Values
0 | los |
1 | oof |
2 | oopir |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxSyncIfTimingRevert The value of tmnxSyncIfTimingRevert indicates whether the reference
source will revert to a higher priority source that has been
re-validated or newly validated.
Th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.1 |
| tmnxSyncIfTimingRef2AdminStatus The value of tmnxSyncIfTimingRef2AdminStatus indicates the
administrative status of the second timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.10 |
| tmnxSyncIfTimingRef2InUse The value of tmnxSyncIfTimingRef2InUse indicates whether the second
timing reference is presently being used by the synchronous timing
subsystem. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.11 |
| tmnxSyncIfTimingRef2Qualified The value of tmnxSyncIfTimingRef2Qualified indicates whether the
second timing reference is qualified for use by the synchronous
timing subsystem. If tmnxSyncIfTimingRef2Qualifie… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.12 |
| tmnxSyncIfTimingRef2Alarm The value of tmnxSyncIfTimingRef2Alarm indicates the alarms on the
second reference. If any of the bits is set to '1', then the second
reference is disqualified by the timing sub… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.13 |
| tmnxSyncIfTimingFreqOffset The value of tmnxSyncIfTimingFreqOffset indicates the frequency offset
of the current selected timing reference in parts per million (ppm). | column | parts-per-million SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.14 |
| tmnxSyncIfTimingStatus The value of tmnxSyncIfTimingStatus indicates the present status of
the Synchronous Timing Equipment Source (SETS). | column | TmnxSETSStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.15 |
| tmnxSyncIfTimingRefOrder3 The value of tmnxSyncIfTimingRefOrder3 is the third most preferred
timing reference for the synchronous equipment timing subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.16 |
| tmnxSyncIfTimingBITSIfType The value of tmnxSyncIfTimingBITSIfType indicates the interface type
of the BITS (Building Integrated Timing Supply) timing reference. It
also indicates the framing type of the in… | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.17 |
| tmnxSyncIfTimingBITSAdminStatus The value of tmnxSyncIfTimingBITSAdminStatus indicates administrative
status of the BITS (Building Integrated Timing Supply) input timing
reference.
The value of th… | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.18 |
| tmnxSyncIfTimingBITSInUse The value of tmnxSyncIfTimingBITSInUse indicates whether the BITS
timing reference is presently being used by the synchronous timing
subsystem. If it is in use, tmnxSyncIfTimingF… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.19 |
| tmnxSyncIfTimingRefOrder1 The value of tmnxSyncIfTimingRefOrder1 indicates the most preferred
timing reference source.
Four different timing input references may be specified in the
referenc… | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.2 |
| tmnxSyncIfTimingBITSQualified The value of tmnxSyncIfTimingBITSQualified indicates whether the BITS
timing reference is qualified for use by the synchronous timing
subsystem. If tmnxSyncIfTimingBITSQualified … | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.20 |
| tmnxSyncIfTimingBITSAlarm The value of tmnxSyncIfTimingBITSAlarm indicates the alarms on the
BITS reference. If any of the bits is set to '1', then the BITS
reference is disqualified by the timing subsyst… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.21 |
| tmnxSyncIfTimingRef1SrcHw obsolete The value of tmnxSyncIfTimingRef1SrcHw indicates the source HW index
of the first timing reference if source is not a port.
This object was obsoleted in release 20.… | column | TmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.22 |
| tmnxSyncIfTimingRef1BITSIfType obsolete The value of tmnxSyncIfTimingRef1BITSIfType indicates the interface
type of the first timing reference if the source is BITS. It also
indicates the framing type of the interface.… | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.23 |
| tmnxSyncIfTimingRef2SrcHw obsolete The value of tmnxSyncIfTimingRef2SrcHw indicates the source HW index
of the second timing reference if source is not a port.
This object was obsoleted in release 20… | column | TmnxHwIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.24 |
| tmnxSyncIfTimingRef2BITSIfType obsolete The value of tmnxSyncIfTimingRef2BITSIfType indicates the interface
type of the second timing reference if the source is BITS. It also
indicates the framing type of the interface.… | column | TmnxBITSIfType | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.25 |
| tmnxSyncIfTimingBITSOutAdmStatus The value of tmnxSyncIfTimingBITSOutAdmStatus indicates administrative
status of the BITS (Building Integrated Timing Supply) output timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.26 |
| tmnxSyncIfTimingBITSOutLineLen tmnxSyncIfTimingBITSOutLineLen indicates the length of the line
(in feet) for the BITS (Building Integrated Timing Supply) output.
The following values are valid:
lengthNotApp… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.27 |
| tmnxSyncIfTimingRef1CfgQltyLevel The value of tmnxSyncIfTimingRef1CfgQltyLevel indicates the configured
Quality Level of Reference 1. A value of 'unknown (0)' indicates
Reference 1 is not forced to a specific qua… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.28 |
| tmnxSyncIfTimingRef1RxQltyLevel The value of tmnxSyncIfTimingRef1RxQltyLevel indicates the received
SSM Quality Level of Reference 1. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.29 |
| tmnxSyncIfTimingRefOrder2 The value of tmnxSyncIfTimingRefOrder2 indicates the second most
preferred timing reference for the synchronous equipment timing
subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.3 |
| tmnxSyncIfTimingRef2CfgQltyLevel The value of tmnxSyncIfTimingRef2CfgQltyLevel indicates the configured
Quality Level of Reference 2. A value of 'unknown (0)' indicates
Reference 2 is not forced to a specific qua… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.30 |
| tmnxSyncIfTimingRef2RxQltyLevel The value of tmnxSyncIfTimingRef2RxQltyLevel indicates the received
SSM Quality Level of Reference 2. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.31 |
| tmnxSyncIfTimingBITSCfgQltyLevel The value of tmnxSyncIfTimingBITSCfgQltyLevel indicates the configured
Quality Level of the BITS interface. A value of 'unknown (0)'
indicates the BITS interface is not forced to … | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.32 |
| tmnxSyncIfTimingBITSRxQltyLevel The value of tmnxSyncIfTimingBITSRxQltyLevel indicates the received
SSM Quality Level of the BITS interface. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.33 |
| tmnxSyncIfTimingBITS2InUse The value of tmnxSyncIfTimingBITS2InUse indicates whether the BITS2
timing reference is presently being used by the synchronous timing
subsystem. If it is in use, tmnxSyncIfTimin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.34 |
| tmnxSyncIfTimingBITS2Qualified The value of tmnxSyncIfTimingBITS2Qualified indicates whether the BITS2
timing reference is qualified for use by the synchronous timing
subsystem. If tmnxSyncIfTimingBITS2Qualifi… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.35 |
| tmnxSyncIfTimingBITS2Alarm The value of tmnxSyncIfTimingBITS2Alarm indicates the alarms on the
BITS2 reference. If any of the bits is set to '1', then the BITS2
reference is disqualified by the timing subs… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.36 |
| tmnxSyncIfTimingBITS2RxQltyLevel The value of tmnxSyncIfTimingBITS2RxQltyLevel indicates the received
SSM Rx Quality Level of the BITS2 interface. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.37 |
| tmnxSyncIfTimingRef1State The value of tmnxSyncIfTimingRef1State indicates the operational state
of the Reference 1 Timing. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.38 |
| tmnxSyncIfTimingRef2State The value of tmnxSyncIfTimingRef2State indicates the operational state
of the Reference 2 Timing. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.39 |
| tmnxSyncIfTimingRef1SrcPort The value of tmnxSyncIfTimingRef1SrcPort indicates the source port of
the first timing reference.
A value of '1e000000'H indicates that there is no source port for … | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.4 |
| tmnxSyncIfTimingBITSState The value of tmnxSyncIfTimingBITSState indicates the operational state
of the BITS Timing Interface. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.40 |
| tmnxSyncIfTimingBITS2State The value of tmnxSyncIfTimingBITS2State indicates the operational
state of the BITS2 Timing Interface. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.41 |
| tmnxSyncIfTimingRef1NationalUse obsolete The value of tmnxSyncIfTimingRef1NationalUse indicates the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces.
This object was obsolete… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.42 |
| tmnxSyncIfTimingRef2NationalUse obsolete The value of tmnxSyncIfTimingRef2NationalUse indicates the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces.
This object was obsolete… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.43 |
| tmnxSyncIfTimingBITSNationalUse The value of tmnxSyncIfTimingBITSNationalUse indicates the national
use bit to carry SSM Messages. This applies only to E1 BITS
interfaces. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.44 |
| tmnxSyncIfTimingQLSelection The value of tmnxSyncIfTimingQLSelection indicates whether or not the
timing reference selection process uses the quality level of each
timing reference when making the decision o… | column | TIMETRA-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.45 |
| tmnxSyncIfTimingOtherCPMInUse The value of tmnxSyncIfTimingOtherCPMInUse indicates whether the
timing reference from the other CPM is presently being used by the
synchronous timing subsystem on the this CPM. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.46 |
| tmnxSyncIfTimingOtherCPMQual The value of tmnxSyncIfTimingOtherCPMQual indicates whether the
timing reference from the other CPM is qualified for use by the
synchronous timing subsystem on the local CPM. If
… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.47 |
| tmnxSyncIfTimingOtherCPMAlarm The value of tmnxSyncIfTimingOtherCPMAlarm indicates the alarms on the
timing reference from the other CPM. If any of the bits is set to
'1', then the reference is disqualified b… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.48 |
| tmnxSyncIfTimingOtherCPMState The value of tmnxSyncIfTimingOtherCPMState indicates the operational
state of the timing reference from the other CPM on the local CPM. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.49 |
| tmnxSyncIfTimingRef1AdminStatus The value of tmnxSyncIfTimingRef1AdminStatus indicates the
administrative status of the first timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.5 |
| tmnxSyncIfTimingBITSOutRefSel The value of tmnxSyncIfTimingBITSOutRefSel indicates the reference
source for BITS output. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.50 |
| tmnxSyncIfTimingBITSTxQltyLevel The value of tmnxSyncIfTimingBITSTxQltyLevel indicates the transmitted
SSM Tx Quality Level of the BITS interface. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.51 |
| tmnxSyncIfTimingBITS2AdminStatus The value of tmnxSyncIfTimingBITS2AdminStatus indicates administrative
status of the BITS2 (Building Integrated Timing Supply) input timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.52 |
| tmnxSyncIfTimingSystemQltyLevel The value of tmnxSyncIfTimingSystemQltyLevel indicates the quality
level of the system timing reference. This is normally the quality
level of the selected timing reference. If … | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.53 |
| tmnxSyncIfTimingRefOrder4 The value of tmnxSyncIfTimingRefOrder4 is the fourth most preferred
timing reference for the synchronous equipment timing subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.54 |
| tmnxSyncIfTimingPTPAdminStatus The value of tmnxSyncIfTimingPTPAdminStatus indicates the
administrative status of the Precision Timing Protocol (PTP) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.55 |
| tmnxSyncIfTimingPTPInUse The value of tmnxSyncIfTimingPTPInUse indicates whether the Precision
Timing Protocol (PTP) timing reference is presently being used by the
synchronous timing subsystem. If it is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.56 |
| tmnxSyncIfTimingPTPQualified The value of tmnxSyncIfTimingPTPQualified indicates whether the
Precision Timing Protocol (PTP) timing reference is qualified for use
by the synchronous timing subsystem. If tmnx… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.57 |
| tmnxSyncIfTimingPTPCfgQltyLevel The value of tmnxSyncIfTimingPTPCfgQltyLevel indicates the configured
Quality Level of Precision Timing Protocol (PTP). A value of
'unknown (0)' indicates PTP is not forced to a … | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.59 |
| tmnxSyncIfTimingRef1InUse The value of tmnxSyncIfTimingRef1InUse indicates whether the first
timing reference is presently being used by the synchronous timing
subsystem. If it is in use, tmnxSyncIfTiming… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.6 |
| tmnxSyncIfTimingPTPRxQltyLevel The value of tmnxSyncIfTimingPTPRxQltyLevel indicates the received SSM
RX Quality Level of the Precision Timing Protocol (PTP). | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.60 |
| tmnxSyncIfTimingPTPState The value of tmnxSyncIfTimingPTPState indicates the operational state
of the Precision Timing Protocol (PTP) Timing. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.61 |
| tmnxSyncIfTimingBITSOutSource The value of tmnxSyncIfTimingBITSOutSource indicates the source of the
BITS (Building Integrated Timing Supply) output. | column | TmnxBITSOutSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.62 |
| tmnxSyncIfTimingBITSOutQlMin The value of tmnxSyncIfTimingBITSOutQlMin indicates the minimum
quality level that a signal must have for it to be selected for BITS
output.
A value of 'unknown (0)… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.63 |
| tmnxSyncIfTimingBITSOutSquelch The value of tmnxSyncIfTimingBITSOutSquelch indicates whether or not
to squelch the output signal. This object is only valid when there is
no valid reference selected.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.64 |
| tmnxSyncIfTimingQlMin The value of tmnxSyncIfTimingQlMin indicates the minimum acceptable
quality level that a signal must have for it to be considered for
selection by the system timing module.
… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.66 |
| tmnxSyncIfTimingWaitToRestorTime The value of tmnxSyncIfTimingWaitToRestorTime indicates the time, in
minutes, that a previously failed input reference must be valid before
it will be used for either the BITS out… | column | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.67 |
| tmnxSyncIfTimingSyncEAdminStatus The value of tmnxSyncIfTimingSyncEAdminStatus indicates the
administrative status of the Synchronous Ethernet (SyncE) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.68 |
| tmnxSyncIfTimingSyncEInUse The value of tmnxSyncIfTimingSyncEInUse indicates whether the Synchronous
Ethernet (SyncE) timing reference is presently being used by the synchronous
timing subsystem. If it is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.69 |
| tmnxSyncIfTimingRef1Qualified The value of tmnxSyncIfTimingRef1Qualified indicates whether the first
timing reference is qualified for use by the synchronous timing
subsystem. If tmnxSyncIfTimingRef1Qualified… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.7 |
| tmnxSyncIfTimingSyncEQualified The value of tmnxSyncIfTimingSyncEQualified indicates whether the Synchronous
Ethernet (SyncE) timing reference is qualified for use by the synchronous timing
subsystem. If tmnxS… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.70 |
| tmnxSyncIfTimingSyncEAlarm The value of tmnxSyncIfTimingSyncEAlarm indicates the alarms on the
Synchronous Ethernet (SyncE) reference. If any of the bits is set to '1',
then the SyncE reference is disquali… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.71 |
| tmnxSyncIfTimingSyncECfgQltyLevl The value of tmnxSyncIfTimingSyncECfgQltyLevl indicates the configured
Quality Level of the Synchronous Ethernet (SyncE) timing reference. A
value of 'unknown (0)' indicates SyncE… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.72 |
| tmnxSyncIfTimingSyncERxQltyLevel The value of tmnxSyncIfTimingSyncERxQltyLevel indicates the received
SSM Quality Level of the Synchronous Ethernet (SyncE) timing
reference. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.73 |
| tmnxSyncIfTimingSyncEState The value of tmnxSyncIfTimingSyncEState indicates the operational
state of the Synchronous Ethernet (SyncE) timing reference. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.74 |
| tmnxSyncIfTimingSyncE2AdmnStatus The value of tmnxSyncIfTimingSyncE2AdmnStatus indicates the
administrative status of the Synchronous Ethernet 2 (SyncE) timing
reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.75 |
| tmnxSyncIfTimingSyncE2InUse The value of tmnxSyncIfTimingSyncE2InUse indicates whether the Synchronous
Ethernet 2 (SyncE) timing reference is presently being used by the synchronous
timing subsystem. If it … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.76 |
| tmnxSyncIfTimingSyncE2Qualified The value of tmnxSyncIfTimingSyncE2Qualified indicates whether the Synchronous
Ethernet 2 (SyncE) timing reference is qualified for use by the synchronous timing
subsystem. If tm… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.77 |
| tmnxSyncIfTimingSyncE2Alarm The value of tmnxSyncIfTimingSyncE2Alarm indicates the alarms on the
Synchronous Ethernet 2 (SyncE) reference. If any of the bits is set to '1',
then the SyncE 2 reference is dis… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.78 |
| tmnxSyncIfTimingSyncE2RxQltyLevl The value of tmnxSyncIfTimingSyncE2RxQltyLevl indicates the received
SSM Quality Level of the Synchronous Ethernet 2 (SyncE) timing
reference. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.79 |
| tmnxSyncIfTimingRef1Alarm The value of tmnxSyncIfTimingRef1Alarm indicates the alarms on the
first reference. If any of the bits is set to '1', then the first
reference is disqualified by the timing subsy… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.8 |
| tmnxSyncIfTimingSyncE2State The value of tmnxSyncIfTimingSyncE2State indicates the operational
state of the Synchronous Ethernet 2 (SyncE) timing reference. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.80 |
| tmnxSyncIfTimingRefOrder5 The value of tmnxSyncIfTimingRefOrder5 is the fifth most preferred
timing reference for the synchronous equipment timing subsystem. | column | TmnxSETSRefSource | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.81 |
| tmnxSyncIfTimingGnssAdminStatus The value of tmnxSyncIfTimingGnssAdminStatus indicates the
administrative status of the Global Navigation Satellite System (GNSS)
timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.82 |
| tmnxSyncIfTimingGnssInUse The value of tmnxSyncIfTimingGnssInUse indicates whether the GNSS
timing reference is presently being used by the synchronous timing
subsystem. If it is in use, tmnxSyncIfTimingFr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.83 |
| tmnxSyncIfTimingGnssQualified The value of tmnxSyncIfTimingGnssQualified indicates whether the GNSS
timing reference is qualified for use by the synchronous timing
subsystem. If tmnxSyncIfTimingGnssQualified i… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.84 |
| tmnxSyncIfTimingGnssAlarm The value of tmnxSyncIfTimingGnssAlarm indicates the alarms on the GNSS timing
reference. If any of the bits is set to '1', then the GNSS reference is
disqualified by the timing … | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.85 |
| tmnxSyncIfTimingGnssCfgQltyLevel The value of tmnxSyncIfTimingGnssCfgQltyLevel indicates the configured
Quality Level of the GNSS timing reference. A value of 'unknown (0)'
indicates Gnss is not forced to a speci… | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.86 |
| tmnxSyncIfTimingGnssRxQltyLevel The value of tmnxSyncIfTimingGnssRxQltyLevel indicates the received
SSM Quality Level of the GNSS timing reference. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.87 |
| tmnxSyncIfTimingGnssState The value of tmnxSyncIfTimingGnssState indicates the operational state
of the GNSS timing reference. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.88 |
| tmnxSyncIfTimingGnss2AdminStatus The value of tmnxSyncIfTimingGnss2AdminStatus indicates the
administrative status of the GNSS 2 timing reference. | column | TmnxPortAdminStatus | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.89 |
| tmnxSyncIfTimingRef2SrcPort The value of tmnxSyncIfTimingRef2SrcPort indicates the source port of
the second timing reference.
A value of '1e000000'H indicates that there is no source port for… | column | TIMETRA-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.9 |
| tmnxSyncIfTimingGnss2InUse The value of tmnxSyncIfTimingGnss2InUse indicates whether the GNSS 2
timing reference is presently being used by the synchronous timing
subsystem. If it is in use, tmnxSyncIfTimin… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.90 |
| tmnxSyncIfTimingGnss2Qualified The value of tmnxSyncIfTimingGnss2Qualified indicates whether the GNSS
2 timing reference is qualified for use by the synchronous timing
subsystem. If tmnxSyncIfTimingGnss2Qualifi… | column | TmnxSETSRefQualified | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.91 |
| tmnxSyncIfTimingGnss2Alarm The value of tmnxSyncIfTimingGnss2Alarm indicates the alarms on the GNSS 2
timing reference. If any of the bits is set to '1', then the GNSS 2 reference
is disqualified by the ti… | column | TmnxSETSRefAlarm | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.92 |
| tmnxSyncIfTimingGnss2RxQltyLevel The value of tmnxSyncIfTimingGnss2RxQltyLevel indicates the received
SSM Quality Level of the GNSS 2 timing reference. | column | TmnxSSMQualityLevel | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.93 |
| tmnxSyncIfTimingGnss2State The value of tmnxSyncIfTimingGnss2State indicates the operational
state of the GNSS 2 timing reference. | column | TmnxRefInState | .1.3.6.1.4.1.6527.3.1.2.2.3.11.1.94 |