tmnxHwOperState

TIMETRA-CHASSIS-MIB · .1.3.6.1.4.1.6527.3.1.2.2.1.8.1.16

Object

column Enumeration
The actual operational status of this hardware component.
              
unknown (1)                Status cannot be determined
              
inService (2)              Online - If tmnxHwClass has a value of
                           'ioModule (8)' or 'cpmModule (9), the
                           card is present, booted, configured,
                           and running.
              
outOfService (3)           Ready - The hardware component is OK
                           but is down because tmnxHwAdminState has
                           a value of 'outOfService (3)'.
              
diagnosing (4)             Not implemented.
              
failed (5)                 This hardware component has failed.  The
                           value of tmnxHwFailureReason indicates
                           the type of failure.  If tmnxHwClass has
                           a value of 'ioModule(8)' or 'cpmModule(9)',
                           there is a card in the slot but it has
                           failed.
              
booting (6)                A card is in the transitional startup state.
              
empty (7)                  There is no card in the slot and it has
                           not been pre-configured.
              
provisioned (8)            There is no card in the slot but it has
                           been pre-configured.
              
unprovisioned (9)          There is a card in the slot but it is not
                           configured.
              
upgrade (10)               Card software version is compatible with
                           and newer than that running on the current
                           active CPM.
              
downgrade (11)             Card software version is compatible with
                           and older than that running on the current
                           active CPM.
              
inServiceUpgrade (12)      Card is inService and the card software
                           version is compatible with and newer than
                           that running on the current active CPM.
                           This state applies only to a standby CPM
                           card. This enumeration is no longer
                           supported as of release 5.0.
              
inServiceDowngrade (13)    Card is inService and the card software
                           is compatible with and older than that
                           running on the current active CPM.  This
                           state applies only to a standby CPM card.
                           This enumeration is no longer supported
                           as of release 5.0.
              
resetPending (14)          Card is awaiting reset following an
                           upgrade or downgrade activity switch.
                           The card software version is upgrade
                           or downgrade compatible but will be reset
                           in order to update it to match the active
                           CPM software.  The value of
                           tmnxChassisUpdateWaitTime indicates the
                           how long the system will wait following
                           an upgrade or downgrade activity switch
                           before it resets IOM cards.  This state
                           applies only to IOM cards. This
                           enumeration is no longer supported as of
                           release 5.0.
              
softReset (15)             Card is performing a soft reset. The
                           data path is active, but control path
                           transitional changes are suspended until
                           the card leaves this state.
              
preExtension (16)          State assigned to an unprovisioned hardware
                           component associated with, or contained in,
                           an (potentially non-existent) extension
                           chassis in a 7950 XRS system that is
                           operating in XRS-20 mode (i.e.
                           tmnxChassisOperTopology is 'standalone(1)').
                           The extension chassis and/or hardware
                           component may or may not be physically
                           present and connected to the master
                           chassis. The system does not monitor
                           extension chassis equipment when
                           tmnxChassisOperTopology is 'standalone(1)'.
                           In this case, for unprovisioned extension
                           chassis equipment, a value of
                           'preExtension(16)' is assigned.
              
 downloading (17)          Card has booted and its configuration is
                           being downloaded.

Context

MIB
TIMETRA-CHASSIS-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.16
Type
column
Access
readonly
Status
current
Parent
tmnxHwEntry
Table
tmnxHwTable
Siblings
34

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unknown
2inService
3outOfService
4diagnosing
5failed
6booting
7empty
8provisioned
9unprovisioned
10upgrade
11downgrade
12inServiceUpgrade
13inServiceDowngrade
14resetPending
15softReset
16preExtension
17downloading

Related Objects

Sibling Objects