tmnxCellMdaBandsInUse

TIMETRA-CELLULAR-MIB · .1.3.6.1.4.1.6527.3.1.2.109.2.3.4.1.17
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
The value of tmnxCellMdaBandsInUse indicates, in string format, the
list of bands being used.
              
For a band to be part of tmnxCellMdaBandsInUse, it must meet one of
the following conditions:
              
1)  'b1' to 'b256' LTE bands that are both enabled by tmnxCellSimCardBandsConfig
    and part of tmnxCellMdaBandsFirmwareEnabled.
              
2)  When tmnxCellSimCardBandsUse3g is 'true' and tmnxCellMdaBandsFirmwareEnabled
    contains '3g', then tmnxCellMdaBandsInUse also contains '3g'.
              
When there isn't any band meeting the conditions above then
tmnxCellMdaBandsInUse is 'all' to indicate all bands in string
tmnxCellMdaBandsFirmwareEnabled are in use.
              
For all examples below, assume tmnxCellMdaBandsFirmwareEnabled being
string 'b2 b3 b4 3g':
              
-  If tmnxCellSimCardBandsConfig has b1 and b2 enabled,
   tmnxCellSimCardBandsUse3g is 'false', then tmnxCellMdaBandsInUse is 'b2'.
              
-  If tmnxCellSimCardBandsConfig has b1 and b2 enabled,
   tmnxCellSimCardBandsUse3g is 'true', then tmnxCellMdaBandsInUse is 'b2 3g'.
              
-  If tmnxCellSimCardBandsConfig has b1 enabled,
   tmnxCellSimCardBandsUse3g is 'true', then tmnxCellMdaBandsInUse is '3g'.
              
-  If tmnxCellSimCardBandsConfig has b1 enabled,
   tmnxCellSimCardBandsUse3g is 'false', then tmnxCellMdaBandsInUse is 'all'.
              
-  If tmnxCellSimCardBandsConfig does not have any bands enabled,
   tmnxCellSimCardBandsUse3g is 'false', then tmnxCellMdaBandsInUse is 'all'.

Context

MIB
TIMETRA-CELLULAR-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.109.2.3.4.1.17
Type
column
Access
readonly
Status
current
Parent
tmnxCellularMdaEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-CELLULAR-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-CELLULAR-MIB::tmnxCellMdaBandsInUse'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-CELLULAR-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-CELLULAR-MIB::tmnxCellMdaBandsInUse.<tmnxCardSlotNum>.<tmnxMDASlotNum>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-CELLULAR-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-CELLULAR-MIB::tmnxCellMdaBandsInUse'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Object Constraints
range: 1-200
Type Constraints
range: 0..255

Conformance

Member of
tmnxCellularStateGroupV22