tBgpPrngPlcyMd5AuthKey
TIMETRA-BGP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.14.6.2.1.11
Object
The value of the object tBgpPrngPlcyMd5AuthKey specifies the
authentication key to be used between BGP peers neighbors when
establishing sessions.
Authentication is done using the MD5 message based digest protocol.
Authentication can be configured globally and applied to all
BGP peers or per group or per peer. The most specific value
is used.
The authentication key can be any combination of letters or
numbers. Note that the string CANNOT contain embedded nulls.
Context
- MIB
- TIMETRA-BGP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.14.6.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Default
""- Parent
- tBgpPeeringPolicyEntry
- Groups
- 3
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-BGP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-BGP-MIB::tBgpPrngPlcyMd5AuthKey'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-BGP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-BGP-MIB::tBgpPrngPlcyMd5AuthKey.<tBgpPeeringPolicyName>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-BGP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-BGP-MIB::tBgpPrngPlcyMd5AuthKey'
Syntax
- Source
- SNMPv2-TCDisplayString
- Base type
OctetString- Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as
US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special
meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the
same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is
illegal. (Note that this also means that a string may
end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255
characters in length.
Values & Constraints
Object Constraints
range: 0-255
Type Constraints
range: 0..255