tBgpInstanceFamily

The value of tBgpInstanceFamily specifies the types of routing
information to be distributed by this instance of BGP.  BGP was
initially designed for the distribution of IPv4 routing information.
Multi-protocol extensions and the use of a VPN-IPv4, VPN-IPv6, MVPN-IPv4
and L2-VPN addresses have been added to extend its ability to carry
overlapping routing information.
              
A 'vpnIpv4 (2)' address is a 12-byte value consisting of
the 8-byte route distinguisher, RD, and the 4-byte ipv4 IP address
prefix.  The RD must be unique within the scope of the VPRN.
This allows the IP address prefixes within different VRFs to
overlap.
              
'ipv6 (3)', 'mcastIpv4 (4)', 'l2vpn (6)' and 'mcastVpnIpv4 (12)' are
multi-protocol extensions to BGP.
              
'mcastIpv6 (16)' is part of multi-protocol extension to BGP.
              
A 'vpnIpv6 (5)' address is a 24-byte value consisting of the 8-byte
RD, and 16 bytes for the IPv6 address. When both IPv4 and IPv6 VPRN
services are enabled, the PE router uses the same RD for both address
families.
              
A 'l2vpn (6)' address is a 12-byte Virtual Switch Instance identifier
(VSI-ID) value consisting of the 8-byte route distinguisher(RD)
followed by a 4-byte value.
              
A 'mvpnIpv4  (7)' address is variable size value consisting of the
1-byte route type, 1-byte length and variable size route type specific.
Route type defines encoding for the route type specific field. Length
indicates the length in octets of the route type specific field.
              
A 'mdtSafi (8)' address is a 16-byte value consisting of 12-byte route
distinguisher(RD) followed by a 4-byte group address.
              
A 'mspw (9)' address is a dynamic multi-segment pseudowire address.
              
A 'flowIpv4 (10)' address is a variable size value consisting of 1 or
2-byte NLRI(Network Layer Reachability Information) length followed by
a variable length NLRI value.
              
A 'routeTarget (11)' address is a variable size value consisting of
zero length or 12 byte (ipv4) or 24 byte (ipv6) NLRI (Network Layer
Reachability Information) length followed by a variable length NLRI
value.
              
A 'mvpnIpv6 (13)' address is variable size value consisting of the
1-byte route type, 1-byte length and variable size route type
specific. Route type defines encoding for the route type specific
field. Length indicates the length in octets of the route type
specific field.
              
A 'flowIpv6 (14)' address is a variable size value consisting of 1 or
2-byte NLRI(Network Layer Reachability Information) length followed by
a variable length NLRI value.
              
A 'evpn (15)' address is variable size value consisting of the 1-byte
route type, 1-byte length and variable size route type specific. Route
type defines encoding for the route type specific field. Length
indicates the length in octets of the route type specific field.

MIB

TIMETRA-BGP-MIB

OID

.1.3.6.1.4.1.6527.3.1.2.14.2.2.1.47

Type

column

Access

readwrite

Status

current

Parent

tBgpInstanceEntry

Table

tBgpInstanceTable

Siblings

69