tBgpInstMultipathNgFamily
TIMETRA-BGP-MIB ·
.1.3.6.1.4.1.6527.3.1.2.14.2.29.1.1
Object
column
TmnxIpFamilyIdentifier
The value of tBgpInstMultipathNgFamily specifies the address family for which the multi-path selection applies.
Context
- MIB
- TIMETRA-BGP-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.14.2.29.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- tBgpInstMultipathNgEntry
- Table
- tBgpInstMultipathNgTable
- Siblings
- 7
Syntax
TmnxIpFamilyIdentifier
- Source
- TmnxIpFamilyIdentifier
- Base type
Enumeration
Values & Constraints
Type Values
0 | unused |
1 | ipv4 |
2 | vpnIpv4 |
3 | ipv6 |
4 | mcastIpv4 |
5 | vpnIpv6 |
6 | l2vpn |
7 | mvpnIpv4 |
8 | mdtSafi |
9 | mspw |
10 | flowIpv4 |
11 | routeTarget |
12 | mcastVpnIpv4 |
13 | mvpnIpv6 |
14 | flowIpv6 |
15 | evpn |
16 | mcastIpv6 |
17 | labelIpv4 |
18 | labelIpv6 |
19 | bgpLs |
20 | mcastVpnIpv6 |
21 | srplcyIpv4 |
22 | srplcyIpv6 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tBgpInstMultipathNgRowStatus The value of tBgpInstMultipathNgRowStatus specifies the row status for
this table entry. It is used to create and delete row entries in this
table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.2 |
| tBgpInstMultipathNgLstCh The value tBgpInstMultipathNgLstCh indicates when an entry in
tBgpInstMultipathNgTable was last changed. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.3 |
| tBgpInstMultipathNgBgp The value of tBgpInstMultipathNgBgp specifies if BGP multipath is
enabled or disabled for this instance and family.
A value of '0' would disable address family spec… | column | number-of-paths Integer32 | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.4 |
| tBgpInstMultipathNgEBgp The value of tBgpInstMultipathNgEBgp specifies the maximum number of
paths that can be installed into RTM when the best path is received
from an EBGP peer.
A value … | column | number-of-paths Integer32 | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.5 |
| tBgpInstMultipathNgIBgp The value of tBgpInstMultipathNgIBgp specifies the maximum number of
paths that can be installed into RTM when the best path is received
from an IBGP peer.
A value … | column | number-of-paths Integer32 | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.6 |
| tBgpInstMultipathNgRestrict When the value of tBgpInstMultipathNgRestrict is set to
'sameAsPathLength', it forces multipaths to have the same AS path
length (unless as-path-ignore is configured).
… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.7 |
| tBgpInstMultipathNgUnequalCost The value of tBgpInstMultipathNgUnequalCost specifies the selection of
multipaths ignores differences in next-hop cost compared to the best
path. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.14.2.29.1.8 |