t11FamContiguousAllocation
T11-FC-FABRIC-ADDR-MGR-MIB ·
.1.3.6.1.2.1.137.1.1.1.1.5
Object
Determines how a particular switch behaves when elected as
the Principal Switch.
If true, the switch will only accept RDIs with a contiguous
allocation; specifically, it will reject RDIs with
non-contiguous Domain_IDs, and if an RDI for a contiguous
Domain_ID is not able to be fulfilled, it will try to
replace all the Domain_IDs in the list with contiguous
Domain_IDs, and if that fails, the RDI will be rejected.
If false, then the switch acts normally in granting
the Domain_IDs even if they are not contiguous.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause.
Context
- MIB
- T11-FC-FABRIC-ADDR-MGR-MIB
- OID
.1.3.6.1.2.1.137.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- t11FamEntry
- Table
- t11FamTable
- Siblings
- 26
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| t11FamFabricIndex A unique index value that uniquely identifies a
particular Fabric known to a particular switch.
In a Fabric conformant to FC-SW-3, only a single Fabric
can operate … | column | T11-TC-MIBT11FabricIndex | .1.3.6.1.2.1.137.1.1.1.1.1 |
| t11FamGrantedFcIds The total number of Fibre Channel Address Identifiers
granted (for local use, i.e., with a particular switch's
Domain_ID) by the Fabric Address Manager on that switch.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.137.1.1.1.1.10 |
| t11FamRecoveredFcIds The total number of Fibre Channel Address Identifiers that
have been recovered by the Fabric Address Manager on a
particular switch since the switch has been initialized.
A recove… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.137.1.1.1.1.11 |
| t11FamFreeFcIds The number of Fibre Channel Address Identifiers that are
currently unassigned on this Fabric and could be available
for assignment either immediately or at some later time.
… | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.137.1.1.1.1.12 |
| t11FamAssignedFcIds The number of Fibre Channel Address Identifiers that are
currently assigned on this Fabric.
The sum of the instances of FreeFcIds and AssignedFcIds
corresponding to… | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.137.1.1.1.1.13 |
| t11FamAvailableFcIds The number of Fibre Channel Address Identifiers that are
unassigned and currently available for immediate assignment
on the Fabric, e.g., with the 'Clean Address' bit set to 1. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.137.1.1.1.1.14 |
| t11FamRunningPriority The running priority of a particular switch on this Fabric.
This value is initialized to the value of t11FamPriority,
and subsequently altered as specified by the procedures
defin… | column | T11FamDomainPriority | .1.3.6.1.2.1.137.1.1.1.1.15 |
| t11FamPrincSwRunningPriority The running priority of the Principal Switch on this
Fabric. | column | T11FamDomainPriority | .1.3.6.1.2.1.137.1.1.1.1.16 |
| t11FamState The state of the Fabric Address Manager on a particular
switch on this Fabric. | column | T11FamState | .1.3.6.1.2.1.137.1.1.1.1.17 |
| t11FamLocalPrincipalSwitchSlctns The number of times a particular switch became the
Principal Switch on this Fabric.
This counter has no discontinuities other than those
that all Counter32s have wh… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.137.1.1.1.1.18 |
| t11FamPrincipalSwitchSelections The number of Principal Switch selections on this Fabric.
This counter has no discontinuities other than those
that all Counter32s have when sysUpTime=0. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.137.1.1.1.1.19 |
| t11FamConfigDomainId The configured Domain_ID of the particular switch on this
Fabric, or zero if no Domain_ID has been configured.
The meaning of this object depends on
t11FamConfigDomainIdType objec… | column | FC-MGMT-MIBFcDomainIdOrZero | .1.3.6.1.2.1.137.1.1.1.1.2 |
| t11FamBuildFabrics The number of non-disruptive fabric reconfigurations (BFs)
that have occurred on this Fabric.
This counter has no discontinuities other than those
that all Counter3… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.137.1.1.1.1.20 |
| t11FamFabricReconfigures The number of disruptive fabric reconfigurations (RCFs)
that have occurred on this Fabric.
This counter has no discontinuities other than those
that all Counter32s … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.137.1.1.1.1.21 |
| t11FamDomainId The Domain_ID of a particular switch on this Fabric or
zero if no Domain_ID has been assigned. | column | FC-MGMT-MIBFcDomainIdOrZero | .1.3.6.1.2.1.137.1.1.1.1.22 |
| t11FamSticky An indication of whether a particular switch is supporting
the concept of Preferred Domain_IDs via a best-effort
attempt to re-assign the same Fibre Channel Address
Identifier val… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.137.1.1.1.1.23 |
| t11FamRestart This object tells the Fabric Address Manager to
request a Fabric reconfiguration.
If this object is set to 'disruptive', then an RCF
(ReConfigure Fabric) is generat… | column | Enumeration | .1.3.6.1.2.1.137.1.1.1.1.24 |
| t11FamRcFabricNotifyEnable An indication of whether or not a particular switch
should issue a t11FamFabricChangeNotify notification on
sending or receiving ReConfigureFabric (RCF) on a Fabric.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.137.1.1.1.1.25 |
| t11FamEnable Enables the Fabric Address Manager on this switch
on this Fabric.
If enabled on a Fabric, the switch will participate in
Principal Switch selection, and Domain_IDs … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.137.1.1.1.1.26 |
| t11FamFabricName The WWN that is configured on this switch to be used as
the name of this Fabric when the value of t11FamEnable is
'false'.
If the value of t11FamEnable is 'true', t… | column | FC-MGMT-MIBFcNameIdOrZero | .1.3.6.1.2.1.137.1.1.1.1.27 |
| t11FamConfigDomainIdType Type of configured Domain_ID contained in
t11FamConfigDomainId.
For the persistence of values across reboots, see the
MODULE-IDENTITY's DESCRIPTION clause. | column | Enumeration | .1.3.6.1.2.1.137.1.1.1.1.3 |
| t11FamAutoReconfigure This object determines how a particular switch
responds to certain error conditions.
The condition that might cause these errors is
the merging of two disjoint Fabr… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.137.1.1.1.1.4 |
| t11FamPriority The initial or configured priority of a particular switch
to be used in Principal Switch selection process.
For the persistence of values across reboots, see the
MO… | column | T11FamDomainPriority | .1.3.6.1.2.1.137.1.1.1.1.6 |
| t11FamPrincipalSwitchWwn The WWN of the Principal Switch on this Fabric,
or zero-length string if the identity of the principal
switch is unknown. | column | FC-MGMT-MIBFcNameIdOrZero | .1.3.6.1.2.1.137.1.1.1.1.7 |
| t11FamLocalSwitchWwn The WWN of the particular switch on this Fabric. | column | FC-MGMT-MIBFcNameIdOrZero | .1.3.6.1.2.1.137.1.1.1.1.8 |
| t11FamAssignedAreaIdList The list of (zero or more) Area_IDs that have been
assigned by a particular switch in this Fabric, formatted
as an array of octets in ascending order.
Each octet re… | column | OctetString | .1.3.6.1.2.1.137.1.1.1.1.9 |