vRouterProtocol
SWITCH-VLAN-MIB ·
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.1
Object
column
r/w
Integer32
This object is used to enable/disable routing protocols. The value of this object is the logical ORing of each bit identifying the routing protocol below, where bit 0 is the low order bit, i.e. 2**0. ipRip bit 0 ipEgp bit 1 ipGgp bit 2 ipHello bit 3 ipIs-is bit 4 ipEs-is bit 5 ipCiscoIgrp bit 6 ipBbnSpfIgp bit 7 ipOspf bit 8 Setting the appropriate bit enables the protocol (if supported); clearing the bit, disables the protocol.
Context
- MIB
- SWITCH-VLAN-MIB
- OID
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vRouterEntry
- Table
- vRouterTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRouterRipMode If the value of this object is 'silent', RIP daemon
processes received routing packets and does NOT send
routing packets. If the value of this object is 'active',
RIP sends and r… | column | Enumeration | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.10 |
| vRouterIpAddress The IP network address for this virtual bridge
instance for the purpose of allowing access from
the external network management system.
This attribute is required for row creation. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.2 |
| vRouterSubNetMask The IP network subnet mask for this virtual bridge
instance for the purpose of allowing access from the
external network management system.
This attribute is required for row crea… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.3 |
| vRouterBcastAddress The IP broadcast address for this virtual bridge
instance for the purpose of allowing access from the
external network management system.
This attribute is required for row creati… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.4 |
| vRouterDescription Textual description of the router instance. | column | OctetString | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.5 |
| vRouterAdminStatus The particular routing environment can be enable(2) or
disable(1), its value is determined by the ifAdminStatus of
the interface associated with this router. | column | VlanAdminStatusCode | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.6 |
| vRouterOperStatus Provide operating status of a particular router
environment. | column | VlanOperStatusCode | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.7 |
| vRouterRowStatus Only supports 'createAndGo' and 'delete' for set
operation. The vLanEntry instance identified by the
value of the index for this attribute must exist before
a attempting to c… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.8 |
| vRouterIfIndex The value of ifIndex which corresponds to this vRouter
instance. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.9 |