SWITCH-VLAN-MIB Table View

Vlan port configuration table.

rcVlanPortEntry row .1.3.6.1.4.1.8886.6.1.19.1.1.1

Vlan port configuration table entry.

Indexes

rcVlanPortId

Column	Syntax	OID
rcVlanPortId An index based 1 that uniquely identifies a switch port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.19.1.1.1.1
rcVlanPortMode Vlan port mode.	Enumerationr/w Enumerated Values: 2 access 3 hybrid 4 trunk 5 dot1q-tunnel 6 hybrid-dt 7 trunk-dt 8 hybrid-tn	.1.3.6.1.4.1.8886.6.1.19.1.1.1.2
rcVlanPortAccessVlanId Access vlan id, when port is in access or tunnel mode.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.1.1.1.3
rcVlanPortHybridVlanAllow Allowed vlans when port is in hybrid mode.	SWITCH-TCVlansetr/w Type Constraints: range: 512	.1.3.6.1.4.1.8886.6.1.19.1.1.1.4
rcVlanPortHybridVlanUntag Untagged vlans when port is in hybrid mode.	SWITCH-TCVlansetr/w Type Constraints: range: 512	.1.3.6.1.4.1.8886.6.1.19.1.1.1.5
rcVlanPortTrunkVlanAllow Allowed vlans when port is in trunk mode.	SWITCH-TCVlansetr/w Type Constraints: range: 512	.1.3.6.1.4.1.8886.6.1.19.1.1.1.6
rcVlanPortVlanNative Native vlan when port is in trunk or hybrid mode.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.1.1.1.7
rcVlanPortTrunkTagNativeEnable Enable or disable tagging native vlan packets when port is in trunking mode.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.19.1.1.1.8
rcVlanPortServiceEtherType Provider vlan S-TAG(Service Tag) type.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.8886.6.1.19.1.1.1.9
rcVlanPortIngressVlanTranslateEnable Enable or disable ingress vlan translate.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.19.1.1.1.10
rcVlanPortEgressVlanTranslateEnable Enable or disable egress vlan translate.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.19.1.1.1.11
rcVlanPortEgressVlanTranslateOffset Vlan translate offset value.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.1.1.1.12
rcVlanPortAcceptFrameType Accept frame type.	Enumerationr/w Enumerated Values: 1 all 2 tag 3 untag	.1.3.6.1.4.1.8886.6.1.19.1.1.1.13
rcVlanPortIngressFiltering Enable or disable ingress filtering.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.19.1.1.1.14
rcVlanPortSvlVlans svl vlan list.	SWITCH-TCVlansetr/w Type Constraints: range: 512	.1.3.6.1.4.1.8886.6.1.19.1.1.1.15

Vlan Mapping configuration table.

rcVlanMappingEntry row .1.3.6.1.4.1.8886.6.1.19.1.2.1

Vlan Mapping configuration table entry.

Indexes

rcVlanMappingPortId rcVlanMappingInnerVlanId

Column	Syntax	OID
rcVlanMappingPortId An index based 1 that uniquely identifies a switch port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.19.1.2.1.1
rcVlanMappingInnerVlanId the inner VLAN ID entering the switch from the customer network. The range is from 1 to 4094.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.1.2.1.2
rcVlanMappingOuterVlanId This object specifies the assigned added outer VLAN ID.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.1.2.1.3
rcVlanMappingHwStatus In hardware or not.	SWITCH-TCEnableVar Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.19.1.2.1.4
rcVlanMappingRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.6.1.19.1.2.1.5

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

rDot1qVlanStaticEntry row .1.3.6.1.4.1.8886.6.1.19.2.1.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

rDot1qVlanIndex

Column	Syntax	OID
rDot1qVlanIndex The VLAN-ID or other identifier refering to this VLAN.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.2.1.1.1
rDot1qVlanStaticName An administratively assigned string, which may be used to identify the VLAN.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.8886.6.1.19.2.1.1.2
rDot1qVlanStaticEgressPorts The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVR…	SWITCH-TCPortListr/w Type Constraints: range: 32	.1.3.6.1.4.1.8886.6.1.19.2.1.1.3
rDot1qVlanStaticUntaggedPorts The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There …	SWITCH-TCPortListr/w Type Constraints: range: 32	.1.3.6.1.4.1.8886.6.1.19.2.1.1.4
rDot1qVlanStaticActiveStatus This object indicates the active status of this entry.	Enumerationr/w Enumerated Values: 1 active 2 suspend	.1.3.6.1.4.1.8886.6.1.19.2.1.1.5
rDot1qVlanStaticRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.6.1.19.2.1.1.6
rDot1qVlanStaticPriority This object indicates the priority of the VLAN.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.8886.6.1.19.2.1.1.7

Forwarding portlist table.

rcPortBasedVlanEntry row .1.3.6.1.4.1.8886.6.1.19.3.1

Defines an entry in the rcPortBasedVlanTable.

Indexes

rcPortBasedVlanIndex

Column	Syntax	OID
rcPortBasedVlanIndex An index based 1 that uniquely identifies a switch port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.19.3.1.1
rcPortBasedVlanPortlist Record the egress forwarding port table.A bit mask corresponding to the physical ports on the chip.Set corresponding bit to 1 to enable port egress forwarding. Set bit to 0 inhibits the port egress forwarding.	SWITCH-TCPortListr/w Type Constraints: range: 32	.1.3.6.1.4.1.8886.6.1.19.3.1.2

QinQ Vlan Mapping Port table.

rcQinQVlanPortEntry row .1.3.6.1.4.1.8886.6.1.19.4.1

Defines an entry in the rcQinQVlanPortTable.

Indexes

rcPortBasedVlanIndex

Column	Syntax	OID
rcQinQVlanPortIndex An index based 1 that uniquely identifies a switch port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.19.4.1.1
rcVlanTranslationStatus Indicates whether this VLAN translation is functioning on the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.8886.6.1.19.4.1.2

Inner Vlan Mapping Configure table.

rcQinQVlanTranslationEntry row .1.3.6.1.4.1.8886.6.1.19.5.1

Defines an entry in the rcQinQVlanPortTable.

Indexes

rcVlanTranslationIndex

Column	Syntax	OID
rcVlanTranslationIndex The VLAN translation is applied in the ingress Layer 2 port. It makes the traffic arriving on the VLAN with this VLAN ID to be mapped to or tagged with the corresponding instance of rcVlanMappingNum on the device.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.5.1.1
rcVlanTranslatedNum The VLAN translation is applied in the ingress Layer 2 port. It makes the traffic arriving on the VLAN with the corresponding instance of rcVlanMappingIndex on the device to be mapped to or tagged with the VLAN of this…	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.19.5.1.2
rcVlanTranslationRowStatus The status of the conceptual row for this global VLAN translation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.6.1.19.5.1.3