rcL3IpRouteMetric1
SWITCH-L3-MIB ·
.1.3.6.1.4.1.8886.6.1.16.3.1.1.9
Object
column
SNMPv2-SMIInteger32
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcL3IpRouteProto value. If this metric is not used, its value should be set to -1.
Context
- MIB
- SWITCH-L3-MIB
- OID
.1.3.6.1.4.1.8886.6.1.16.3.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcL3IpRouteEntry
- Table
- rcL3IpRouteTable
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcL3IpRouteDest The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but ac… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.6.1.16.3.1.1.1 |
| rcL3IpRouteUsingHw This object is true(1) if this route is contained in
the hardware routing table; otherwise, it is false(2). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.16.3.1.1.10 |
| rcL3IpRouteIsStatic This object is true(1) if this route is defined in the
'rcL3IpStaticRouteTable'. This object is false(2) if this
route was created dynamically (e.g., with RIP, OSPF) or was
manua… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.16.3.1.1.11 |
| rcL3IpRouteFlags Not implemented. Returns '0'.
Contains the information required for a netstat-like
'Flags' field.
The flags field represents a decimal value of the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.6.1.16.3.1.1.12 |
| rcL3IpRouteRef Not implemented. Returns '0'.
Contains the information required for the netstat 'Ref'
field, which indicates the number active uses for this
route. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.6.1.16.3.1.1.13 |
| rcL3IpRouteUse Not implemented. Returns '0'.
Contains the information required for the netstat 'Use'
field, which indicates the number of packets sent with
this route. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.6.1.16.3.1.1.14 |
| rcL3IpRouteRowStatus This object indicates the status of this entry. A row in this
table must be created using the createAndWait(5) action state
(i.e., createAndGo(4) is not supported). This object … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.6.1.16.3.1.1.15 |
| rcL3IpRouteMask Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcL3IpRouteDest field.
If the value of the rcL3IpRouteD… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.6.1.16.3.1.1.2 |
| rcL3IpRouteNextHopIp The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP addr… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.6.1.16.3.1.1.3 |
| rcL3IpRouteNextHopMac The six byte MAC address of the next hop of this
route. If the underlying hardware does not support this
object, an octet string of zero length is returned. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8886.6.1.16.3.1.1.4 |
| rcL3IpRouteIfIndex The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.16.3.1.1.5 |
| rcL3IpRouteType The type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP architecture.
Setting this object to… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.16.3.1.1.6 |
| rcL3IpRouteProto The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.16.3.1.1.7 |
| rcL3IpRouteAge The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the r… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.6.1.16.3.1.1.8 |