rcL3IpRouteMask

SWITCH-L3-MIB · .1.3.6.1.4.1.8886.6.1.16.3.1.1.2

MIB view Table view

Object

column SNMPv2-SMIIpAddress

Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcL3IpRouteDest field.
              
If the value of the rcL3IpRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0.  It should be noted that all IP routing
subsystems implicitly use this mechanism.

Context

MIB: SWITCH-L3-MIB
OID: .1.3.6.1.4.1.8886.6.1.16.3.1.1.2
Type: column
Access: noaccess
Status: current
Parent: rcL3IpRouteEntry
Table: rcL3IpRouteTable
Siblings: 14

Syntax

SNMPv2-SMIIpAddress

Source: SNMPv2-SMIIpAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 4

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rcL3IpRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but ac…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.1`
rcL3IpRouteUsingHw This object is true(1) if this route is contained in the hardware routing table; otherwise, it is false(2).	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.10`
rcL3IpRouteIsStatic This object is true(1) if this route is defined in the 'rcL3IpStaticRouteTable'. This object is false(2) if this route was created dynamically (e.g., with RIP, OSPF) or was manua…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.11`
rcL3IpRouteFlags Not implemented. Returns '0'. Contains the information required for a netstat-like 'Flags' field. The flags field represents a decimal value of the …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.12`
rcL3IpRouteRef Not implemented. Returns '0'. Contains the information required for the netstat 'Ref' field, which indicates the number active uses for this route.	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.13`
rcL3IpRouteUse Not implemented. Returns '0'. Contains the information required for the netstat 'Use' field, which indicates the number of packets sent with this route.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.14`
rcL3IpRouteRowStatus This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.15`
rcL3IpRouteNextHopIp The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP addr…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.3`
rcL3IpRouteNextHopMac The six byte MAC address of the next hop of this route. If the underlying hardware does not support this object, an octet string of zero length is returned.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.4`
rcL3IpRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this i…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.5`
rcL3IpRouteType The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to…	column	Enumeration	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.6`
rcL3IpRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	column	Enumeration	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.7`
rcL3IpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the r…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.8`
rcL3IpRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcL3IpRouteProto value. If this metric is…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.6.1.16.3.1.1.9`