rcL3IpRouteAge

SWITCH-L3-MIB · .1.3.6.1.4.1.8886.6.1.16.3.1.1.8
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.

Context

MIB
SWITCH-L3-MIB
OID
.1.3.6.1.4.1.8886.6.1.16.3.1.1.8
Type
column
Access
readonly
Status
current
Parent
rcL3IpRouteEntry
Table
rcL3IpRouteTable
Siblings
14

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcL3IpRouteDest
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but ac…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.6.1.16.3.1.1.1
rcL3IpRouteUsingHw
This object is true(1) if this route is contained in the hardware routing table; otherwise, it is false(2).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.16.3.1.1.10
rcL3IpRouteIsStatic
This object is true(1) if this route is defined in the 'rcL3IpStaticRouteTable'. This object is false(2) if this route was created dynamically (e.g., with RIP, OSPF) or was manua…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.16.3.1.1.11
rcL3IpRouteFlags
Not implemented. Returns '0'. Contains the information required for a netstat-like 'Flags' field. The flags field represents a decimal value of the …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8886.6.1.16.3.1.1.12
rcL3IpRouteRef
Not implemented. Returns '0'. Contains the information required for the netstat 'Ref' field, which indicates the number active uses for this route.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.8886.6.1.16.3.1.1.13
rcL3IpRouteUse
Not implemented. Returns '0'. Contains the information required for the netstat 'Use' field, which indicates the number of packets sent with this route.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.16.3.1.1.14
rcL3IpRouteRowStatus
This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8886.6.1.16.3.1.1.15
rcL3IpRouteMask
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcL3IpRouteDest field. If the value of the rcL3IpRouteD…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.6.1.16.3.1.1.2
rcL3IpRouteNextHopIp
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP addr…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.6.1.16.3.1.1.3
rcL3IpRouteNextHopMac
The six byte MAC address of the next hop of this route. If the underlying hardware does not support this object, an octet string of zero length is returned.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.8886.6.1.16.3.1.1.4
rcL3IpRouteIfIndex
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this i…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.6.1.16.3.1.1.5
rcL3IpRouteType
The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to…
columnEnumeration.1.3.6.1.4.1.8886.6.1.16.3.1.1.6
rcL3IpRouteProto
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
columnEnumeration.1.3.6.1.4.1.8886.6.1.16.3.1.1.7
rcL3IpRouteMetric1
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcL3IpRouteProto value. If this metric is…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.6.1.16.3.1.1.9