fsofcTraceEnable
SUPERMICRO-OFC-CFG-MIB ·
.1.3.6.1.4.1.10876.101.2.81.1.1.1.8
Object
This object can be used to enable trace dynamically in OFC
module. A four byte integer value is specified for enabling
the level of tracing.Each Bit in the four byte integer variable
represents a level of Trace.
Trace Levels
BIT
0 - Init and Shutdown traces
1 - Management traces
2 - Data Path traces
3 - Control Plane traces
4 - Packet Dump traces
5 - Traces related to all resources except buffers
6 - All Failure traces
7 - Buffer allocation/release traces
The remaining bits are unused. The combination of levels are also allowed.
For example if the bits 1 and 2 are set, then the Trace statements related to
management and Data Path will be printed.
The user have to enter the corresponding integer value for the bits set.
For example if bits 1 and 2 are set then value of 6 should be entered.
Context
- MIB
- SUPERMICRO-OFC-CFG-MIB
- OID
.1.3.6.1.4.1.10876.101.2.81.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsofcCfgEntry
- Table
- fsofcCfgTable
- Siblings
- 9
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsofcContextId Identifies the Openflow Client [OFC] Context. | column | ContextId | .1.3.6.1.4.1.10876.101.2.81.1.1.1.1 |
| fsofcSwitchEntryStatus The status of the entry can be used as specified in the SNMP V2
standard. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.81.1.1.1.10 |
| fsofcModuleStatus The desired state of the Openflow Client system. The Openflow client is
functionally active only when the module status is enabled. And if module
status set to 'disabled' the ope… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.2 |
| fsofcSupportedVersion The Supported version of the Openflow Client system In this given context. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.3 |
| fsofcDefaultFlowMissBehaviour The default action for the flow-miss entries, for all the flow tables, which
does not have any default flow-miss entry.
The value 'drop' (1) indicates that the packet to be dropp… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.4 |
| fsofcControlPktBuffering The administrative decision to buffer the control packets,
The value 'enabled' (1) indicates that the packet will be buffered and
'disabled' (2) indicates that there will be no bu… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.5 |
| fsofcIpReassembleStatus The administrative decision object to enabled/disabled IP packets re-assembling,
The value 'enabled' (1) indicates that the packet will be reassembled and
'disabled' (2) indicates… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.6 |
| fsofcPortStpStatus The administrative decision object to enabled/disabled STP protocol on openflow ports,
The value 'enabled' (1) indicates that STP will be enabled on openflow ports and
'disabled' … | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.7 |
| fsofcSwitchModeOnConnFailure The administrative decision object to decide the switch behavior on connection
failure with controller. The value 'failSecure' (1) indicates that switch will
be moved to secured… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.81.1.1.1.9 |