fsMIVlanTunnelDot1xAddress

SUPERMICRO-MIVLAN-EXT-MIB · .1.3.6.1.4.1.10876.101.1.138.2.1.1.4
Commands MIB view Table view

Object

column r/w SNMPv2-TCMacAddress 
The MAC address to be used for Dot1x packets tunneling . When
Dot1x tunneling is enabled on a port, this MAC address will 
be used as the the destination MAC address for the customer Dot1x 
packets received with reserved address over this port. 
              
Inside a given Network, Dot1x packets received with this MAC address 
will be treated as data packets and not processed.
              
When the tunneled Dot1x packets are sent out of the given Network, 
this MAC address will be replaced with the reserved address defined 
for Dot1x packets. This is done only when Dot1x protocol tunnel
status is set to Tunnel on the outgoing port.Dropped otherwise.

Context

MIB
SUPERMICRO-MIVLAN-EXT-MIB
OID
.1.3.6.1.4.1.10876.101.1.138.2.1.1.4
Type
column
Access
readwrite
Status
current
Parent
fsMIVlanTunnelContextInfoEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVLAN-EXT-MIB::fsMIVlanTunnelDot1xAddress'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SUPERMICRO-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVLAN-EXT-MIB::fsMIVlanTunnelDot1xAddress.<fsMIVlanContextId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICRO-MIVLAN-EXT-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICRO-MIVLAN-EXT-MIB::fsMIVlanTunnelDot1xAddress'

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString
Display format
1x:
Type Description
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires MAC
addresses to be transmitted most significant bit first.

Values & Constraints

Type Constraints
range: 6