fsLaPortChannelDLAGSystemID
SUPERMICRO-LA-MIB ·
.1.3.6.1.4.1.10876.101.1.63.2.1.1.13
Object
This object is used to configure the common System ID in
D-LAG nodes to be used for communicating with the peer node
when D-LAG status is enabled.
Since all the D-LAG nodes use this common D-LAG system ID to
communicate with the peer node, for peer node it looks like
it has established a LAG with a single peer node though the
LAG is shared across multiple D-LAG nodes.
Configuring this object is not allowed when D-LAG status
is enabled. To configure this object first
D-LAG status should be set to disabled.
Disabling D-LAG/port-channel will not delete/reset the configured
value for this object.
This object uniquely identifies a D-LAG node and used in
master-slave-selection process when redundancy feature is
enabled in a D-LAG node to elect master/slave.
Context
- MIB
- SUPERMICRO-LA-MIB
- OID
.1.3.6.1.4.1.10876.101.1.63.2.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsLaPortChannelEntry
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-LA-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LA-MIB::fsLaPortChannelDLAGSystemID'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SUPERMICRO-LA-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-LA-MIB::fsLaPortChannelDLAGSystemID.<fsLaPortChannelIfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICRO-LA-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICRO-LA-MIB::fsLaPortChannelDLAGSystemID'
Syntax
- Source
- SNMPv2-TCMacAddress
- Base type
OctetString- Display format
1x:
Type Description
Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first.
Values & Constraints
Type Constraints
range: 6