fsErpsRingRplNeighbourPort

SUPERMICRO-ERPS-MIB · .1.3.6.1.4.1.10876.101.2.40.2.1.1.20
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
This object identifies the RPL Neighbour port of the ring .
              
Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and 
'IfIndex of fsErpsRingPort2'. 
              
When a port is configured as a RPL Neighbour port,  that node becomes RPL 
Neighbour for that ring. [Reference : Section 10.1 of ITU-T G.8032 Y.1344 (03/2010)] 
              
Value '0' indicates that none of the ring ports is a RPL Neighbour port
and hence the node is not a RPL Neighbour.
              
In an interconnected node of a sub-ring, the 'fsErpsRingPort1' alone 
can be chosen as an RPL Neighbour port when administrator decides to have the 
interconnected node as the RPL Neighbour of the sub-ring.
              
Both the RPL owner and RPL Neighbor node cannot be enabled at the same 
Ethernet Ring Node.
              
Administrator has to ensure that, only one node in a ring is 
configured as RPL Neighbour ,and the node is adjacent to the RPL .

Context

MIB
SUPERMICRO-ERPS-MIB
OID
.1.3.6.1.4.1.10876.101.2.40.2.1.1.20
Type
column
Access
readwrite
Status
current
Parent
fsErpsRingEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ERPS-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ERPS-MIB::fsErpsRingRplNeighbourPort'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SUPERMICRO-ERPS-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ERPS-MIB::fsErpsRingRplNeighbourPort.<fsErpsContextId>.<fsErpsRingId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICRO-ERPS-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICRO-ERPS-MIB::fsErpsRingRplNeighbourPort'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647