fsErpsRingConfigExtVCRecoveryPeriodicTime
SUPERMICRO-ERPS-MIB ·
.1.3.6.1.4.1.10876.101.2.40.2.5.1.1
Object
column r/w
millisecondsUnsigned32
This object is used to configure the time interval for which the
periodic timer needs to be restarted, when the corresponding main
ring indicates the virtual channel status change to this sub-ring
and when the virtual channel of this sub-ring is in failed state.
When one of the ring port of the main ring is in failed state,
main ring indicates virtual channel status change indication to
sub-ring when one of the following event happens:
- R-APS (NR) is received on a ring port of the main ring
- Local Clear SF on the main ring.
On getting this virtual channel status indication from the main ring,
this sub-ring will restart the periodic timer for this value, only
if the virtual channel is in failed state.
Once the periodic timer expires, it will get restarted only for the
normal periodic time (value present in fsErpsRingConfigPeriodicTime).
This object is valid only for sub-rings. For normal rings, configuring
this object will not have any impact.
This value must be configured on both the inter-connected nodes of the
main ring.
It is recommended to configure the value for this object as:
(Periodic Timer Value + 3 * CC interval + GuardTimer Value of Main
Ring + delta-T). It is recommended to have 3*CC interval as delta-T.
The configured value of this timer is applicable only from the next
start/re-start of the timer.
This object can take the value between 0 to 1 hour, configurable in
unit of 1 milliseconds. For example, to configure the value as
5 seconds, configure the value as 5000.
Default value for this object is 5560. This value is derived from the
above formula with periodic timer value as 5 seconds, CC interval as
10 milliseconds, guard timer value as 500 milliseconds and delta T as
30 milliseconds.
Context
- MIB
- SUPERMICRO-ERPS-MIB
- OID
.1.3.6.1.4.1.10876.101.2.40.2.5.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- fsErpsRingConfigExtEntry
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ERPS-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ERPS-MIB::fsErpsRingConfigExtVCRecoveryPeriodicTime'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SUPERMICRO-ERPS-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ERPS-MIB::fsErpsRingConfigExtVCRecoveryPeriodicTime.<fsErpsContextId>.<fsErpsRingId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICRO-ERPS-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICRO-ERPS-MIB::fsErpsRingConfigExtVCRecoveryPeriodicTime'
Syntax
millisecondsUnsigned32
Values & Constraints
Object Constraints
range: 0-3600000