dhcpRelayRAIOptionInserted

SUPERMICRO-DHCP-RLY-MIB · .1.3.6.1.4.1.10876.101.1.24.1.9
MIB view Table view

Object

scalar SNMPv2-SMICounter32 
Number of packets in which the RelayAgent inserted
the RAIOption.

Context

MIB
SUPERMICRO-DHCP-RLY-MIB
OID
.1.3.6.1.4.1.10876.101.1.24.1.9
Type
scalar
Access
readonly
Status
current
Parent
dhcpRelay
Siblings
16

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dhcpRelaying
Only when enabled, the Relay Agent shall become active.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.1
dhcpRelayRAICircuitIDSubOptionInserted
Number of packets in which the RelayAgent inserted the CircuitID SubOption.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.24.1.10
dhcpRelayRAIRemoteIDSubOptionInserted
Number of packets in which the RelayAgent inserted the RemoteID SubOption.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.24.1.11
dhcpRelayRAISubnetMaskSubOptionInserted
Number of packets in which the RelayAgent inserted the SubnetMask SubOption.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.24.1.12
dhcpRelayRAIOptionWronglySet
Number of packets dropped by the Relay Agent because the giaddr field is not set but the RAI option exists in the packet.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.24.1.13
dhcpRelayRAISpaceConstraint
Number of packets in which the RAI Option wasnot inserted by the Relay Agent because if inserted the packetsize shall exceed the MTU.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.24.1.14
dhcpConfigTraceLevel
The Trace level Object which has bit masks for various levels of tracing
scalarInteger32.1.3.6.1.4.1.10876.101.1.24.1.15
dhcpConfigDhcpCircuitOption
This Object defines the type of information to be present in circuit id sub-option.And this option can specfied only if CircuitIDSubOptionControl is enabled.It is possible to s…
scalarBits.1.3.6.1.4.1.10876.101.1.24.1.16
dhcpRelayCounterReset
This object is used to reset the statistics counters. When set to set(1), statistics counters will be cleared. When set to notset(2), no action will take place.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.17
dhcpRelayServersOnly
When enabled, the Relay Agent shall forward the packets from the client to a specific DHCP server.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.2
dhcpRelaySecsThreshold
IF the secs field in the DHCP message is greater than the dhcpRelaySecsThreshold, Packet get dropped at the Relay Agent
scalarInteger32.1.3.6.1.4.1.10876.101.1.24.1.3
dhcpRelayHopsThreshold
A maximum hop count,a relay agent allow to pass through it.If the HopCount in the Dhcp Message is greater than the dhcpRelayHopsThreshold, Packet get dropped at the Relay Agent
scalarInteger32.1.3.6.1.4.1.10876.101.1.24.1.4
dhcpRelayRAIOptionControl
Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a packet from a client …
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.5
dhcpRelayRAICircuitIDSubOptionControl
When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the CircuitID sub-option, when necessary, while relaying packets from a client to server an…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.6
dhcpRelayRAIRemoteIDSubOptionControl
When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the RemoteID sub-option, when necessary, while relaying packets from a client to server and…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.7
dhcpRelayRAISubnetMaskSubOptionControl
When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the Subnet Mask sub-option, when necessary, while relaying packets from a client to server …
scalarEnumeration.1.3.6.1.4.1.10876.101.1.24.1.8