rptrMonitorPortDataRateMismatches

This counter is incremented by one for each
frame received by this port that meets all
of the conditions required by only one of the
following two measurement methods:
              
Measurement method A:  1) The CollisionEvent
signal is not asserted (10Mb/s operation) or
the Collision Count Increment state of the
partition state diagram (fig 27-8 of
[IEEE 802.3 Std]) has not been entered
(100Mb/s operation).  2) The ActivityDuration
is greater than ValidPacketMinTime.  3) The
frequency (data rate) is detectably mismatched
from the local transmit frequency.
              
Measurement method B:  1) The CollisionEvent
signal is not asserted (10Mb/s operation)
or the Collision Count Increment state of the
partition state diagram (fig 27-8 of
[IEEE 802.3 Std]) has not been entered
(100Mb/s operation).  2) The OctetCount is
greater than 63.  3) The frequency (data
rate) is detectably mismatched from the local
transmit frequency.  The exact degree of
mismatch is vendor specific and is to be
defined by the vendor for conformance testing.
              
When this event occurs, other counters whose
increment conditions were satisfied may or may not
also be incremented, at the implementor's
discretion.  Whether or not the repeater was able
to maintain data integrity is beyond the scope of
this standard.
              
A discontinuity may occur in the value
when the value of object
rptrMonitorPortLastChange changes.

MIB

SNMP-REPEATER-MIB

OID

.1.3.6.1.2.1.22.2.3.1.1.13

Type

column

Access

readonly

Status

current

Parent

rptrMonitorPortEntry