sdlcPortOperRole
SNA-SDLC-MIB ·
.1.3.6.1.2.1.41.1.1.2.1.2
Object
column
Enumeration
This object describes the role that the link
station has assumed on this connection.
Even though this is defined as a port object,
it is a link station attribute in the sense
that a role is per link station. However, it
is not possible to vary link station roles on a
particular port. For example, if an SDLC port
is configured to primary, all link stations on
that port must be primary.
The value of sdlcPortOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command.
Context
- MIB
- SNA-SDLC-MIB
- OID
.1.3.6.1.2.1.41.1.1.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sdlcPortOperEntry
- Table
- sdlcPortOperTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | primary |
2 | secondary |
3 | undefined |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdlcPortOperName An octet string that describes the physical
port to which this interface is currently
attached. It has implementation-specific
significance. | column | OctetString | .1.3.6.1.2.1.41.1.1.2.1.1 |
| sdlcPortOperSlowPollTimer This object describes the elapsed time (in
1/100ths of a second) between polls for failed
secondary link station addresses.
This object only has meaning for SDLC po… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.2.1.10 |
| sdlcPortOperLastModifyTime This object describes the value of sysUpTime
when this port definition was last modified.
If the port has not been modified, then this
value shall be zero. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.41.1.1.2.1.11 |
| sdlcPortOperLastFailTime This object describes the value of sysUpTime
when this SDLC port last failed. If the port
has not failed, then this value shall be zero. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.41.1.1.2.1.12 |
| sdlcPortOperLastFailCause This enumerated object describes the cause of
the last failure of this SDLC port. If the
port has not failed, then this object has a
value of undefined(1). | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.13 |
| sdlcPortOperType This parameter defines whether the SDLC port
is currently operating as though connected to a
leased or switched line. | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.3 |
| sdlcPortOperTopology This parameter defines whether the SDLC port is
currently operating in a point-to-point or
multipoint topology. | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.4 |
| sdlcPortOperISTATUS This parameter describes the initial value of
the administrative status, ifAdminStatus, of
this SDLC port at last port start-up. | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.5 |
| sdlcPortOperACTIVTO This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.2.1.6 |
| sdlcPortOperPAUSE This object describes the current minimum
elapsed time (in 1/100ths of a second) between
any two traversals of the poll list for a
primary SDLC port.
The object des… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.2.1.7 |
| sdlcPortOperSlowPollMethod This object defines the exact method that is in
effect for periodically polling failed secondary
link station addresses.
If sdlcPortOperSlowPollMethod == servlim, t… | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.8 |
| sdlcPortOperSERVLIM This object describes the number of times the
active poll list is currently being traversed
before polling a station on the slow poll list
for a primary, multipoint SDLC port.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.1.2.1.9 |