sdlcPortOperISTATUS
SNA-SDLC-MIB ·
.1.3.6.1.2.1.41.1.1.2.1.5
Object
column
Enumeration
This parameter describes the initial value of the administrative status, ifAdminStatus, of this SDLC port at last port start-up.
Context
- MIB
- SNA-SDLC-MIB
- OID
.1.3.6.1.2.1.41.1.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sdlcPortOperEntry
- Table
- sdlcPortOperTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | inactive |
2 | active |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdlcPortOperName An octet string that describes the physical
port to which this interface is currently
attached. It has implementation-specific
significance. | column | OctetString | .1.3.6.1.2.1.41.1.1.2.1.1 |
| sdlcPortOperSlowPollTimer This object describes the elapsed time (in
1/100ths of a second) between polls for failed
secondary link station addresses.
This object only has meaning for SDLC po… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.2.1.10 |
| sdlcPortOperLastModifyTime This object describes the value of sysUpTime
when this port definition was last modified.
If the port has not been modified, then this
value shall be zero. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.41.1.1.2.1.11 |
| sdlcPortOperLastFailTime This object describes the value of sysUpTime
when this SDLC port last failed. If the port
has not failed, then this value shall be zero. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.41.1.1.2.1.12 |
| sdlcPortOperLastFailCause This enumerated object describes the cause of
the last failure of this SDLC port. If the
port has not failed, then this object has a
value of undefined(1). | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.13 |
| sdlcPortOperRole This object describes the role that the link
station has assumed on this connection.
Even though this is defined as a port object,
it is a link station attribute in… | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.2 |
| sdlcPortOperType This parameter defines whether the SDLC port
is currently operating as though connected to a
leased or switched line. | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.3 |
| sdlcPortOperTopology This parameter defines whether the SDLC port is
currently operating in a point-to-point or
multipoint topology. | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.4 |
| sdlcPortOperACTIVTO This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.2.1.6 |
| sdlcPortOperPAUSE This object describes the current minimum
elapsed time (in 1/100ths of a second) between
any two traversals of the poll list for a
primary SDLC port.
The object des… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.2.1.7 |
| sdlcPortOperSlowPollMethod This object defines the exact method that is in
effect for periodically polling failed secondary
link station addresses.
If sdlcPortOperSlowPollMethod == servlim, t… | column | Enumeration | .1.3.6.1.2.1.41.1.1.2.1.8 |
| sdlcPortOperSERVLIM This object describes the number of times the
active poll list is currently being traversed
before polling a station on the slow poll list
for a primary, multipoint SDLC port.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.1.2.1.9 |