sdlcPortAdminSlowPollTimer
SNA-SDLC-MIB ·
.1.3.6.1.2.1.41.1.1.1.1.9
Object
This object describes the elapsed time (in
1/100ths of a second) between polls for failed
secondary link station addresses. Depending
on the implementation, a write operation to
this administered value may not take effect
until the port is cycled inactive.
This object only has meaning for SDLC ports
where
sdlcPortAdminRole == primary
and
sdlcPortAdminTopology == multipoint
Context
- MIB
- SNA-SDLC-MIB
- OID
.1.3.6.1.2.1.41.1.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sdlcPortAdminEntry
- Table
- sdlcPortAdminTable
- Siblings
- 8
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdlcPortAdminName An octet string that defines the physical port
to which this interface is assigned. It has
implementation-specific significance. Its value
shall be unique within the administered… | column | OctetString | .1.3.6.1.2.1.41.1.1.1.1.1 |
| sdlcPortAdminRole This object describes the role that the link
station shall assume the next time a connection
is established.
Even though this is defined as a port object,
it is a l… | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.2 |
| sdlcPortAdminType This parameter defines whether the SDLC port
is to connect to a leased or switched line. A
write operation to this administrative value
shall not take effect until the SDLC port… | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.3 |
| sdlcPortAdminTopology This parameter defines whether the SDLC port is
capable of operating in either a point-to-point
or multipoint topology.
sdlcPortAdminTopology == multipoint implies … | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.4 |
| sdlcPortAdminISTATUS This parameter controls the initial value of
the administrative status, ifAdminStatus, of
this SDLC port at port start-up. Depending
on the implementation, a write operation to
t… | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.5 |
| sdlcPortAdminACTIVTO This parameter defines the period of time (in
1/100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considere… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.1.1.6 |
| sdlcPortAdminPAUSE This object defines the minimum elapsed time
(in 1/100ths of a second) between any two
traversals of the poll list for a primary SDLC
port. Depending on the implementation, a wri… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.1.1.7 |
| sdlcPortAdminSERVLIM This object defines the number of times the
active poll list will be traversed before
polling a station on the slow poll list for a
primary, multipoint SDLC port. Depending on
t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.1.1.1.8 |