sdlcPortAdminPAUSE
SNA-SDLC-MIB ·
.1.3.6.1.2.1.41.1.1.1.1.7
Object
This object defines the minimum elapsed time
(in 1/100ths of a second) between any two
traversals of the poll list for a primary SDLC
port. Depending on the implementation, a write
operation to this administered value may not
take effect until the port is cycled inactive.
The object descriptor contains the name of an
NCP configuration parameter, PAUSE. Please
note that the value of this object represents
1/100ths of a second while the NCP PAUSE is
represented in 1/10ths of a second.
This object only has meaning for SDLC ports
where sdlcPortAdminRole == primary
Context
- MIB
- SNA-SDLC-MIB
- OID
.1.3.6.1.2.1.41.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sdlcPortAdminEntry
- Table
- sdlcPortAdminTable
- Siblings
- 8
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdlcPortAdminName An octet string that defines the physical port
to which this interface is assigned. It has
implementation-specific significance. Its value
shall be unique within the administered… | column | OctetString | .1.3.6.1.2.1.41.1.1.1.1.1 |
| sdlcPortAdminRole This object describes the role that the link
station shall assume the next time a connection
is established.
Even though this is defined as a port object,
it is a l… | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.2 |
| sdlcPortAdminType This parameter defines whether the SDLC port
is to connect to a leased or switched line. A
write operation to this administrative value
shall not take effect until the SDLC port… | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.3 |
| sdlcPortAdminTopology This parameter defines whether the SDLC port is
capable of operating in either a point-to-point
or multipoint topology.
sdlcPortAdminTopology == multipoint implies … | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.4 |
| sdlcPortAdminISTATUS This parameter controls the initial value of
the administrative status, ifAdminStatus, of
this SDLC port at port start-up. Depending
on the implementation, a write operation to
t… | column | Enumeration | .1.3.6.1.2.1.41.1.1.1.1.5 |
| sdlcPortAdminACTIVTO This parameter defines the period of time (in
1/100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considere… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.1.1.6 |
| sdlcPortAdminSERVLIM This object defines the number of times the
active poll list will be traversed before
polling a station on the slow poll list for a
primary, multipoint SDLC port. Depending on
t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.1.1.1.8 |
| sdlcPortAdminSlowPollTimer This object describes the elapsed time (in
1/100ths of a second) between polls for failed
secondary link station addresses. Depending
on the implementation, a write operation to
… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.1.1.1.9 |