sdlcLSOperName
SNA-SDLC-MIB ·
.1.3.6.1.2.1.41.1.2.2.1.1
Object
column
OctetString
An octet string that defines the name of the remote SDLC link station. This field is received in the XID3 control vector 0x0E, type 0xF7.
Context
- MIB
- SNA-SDLC-MIB
- OID
.1.3.6.1.2.1.41.1.2.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sdlcLSOperEntry
- Table
- sdlcLSOperTable
- Siblings
- 23
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdlcLSOperRETRIESt This object reflects the current interval (in
1/100ths of a second) between retry sequences
for an SDLC link station if multiple retry
sequences are specified. A retry sequence i… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.2.2.1.10 |
| sdlcLSOperRETRIESn This object reflects the current number of
times that a retry sequence is repeated for an
SDLC link station. A retry sequence is a
series of retransmitted frames ( data or
contro… | column | Integer32 | .1.3.6.1.2.1.41.1.2.2.1.11 |
| sdlcLSOperRNRLIMIT This object reflects the current length of
time (in 1/100ths of a second) that an SDLC
link station will allow its adjacent link
station to remain in a busy (RNR) state before
dec… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.2.2.1.12 |
| sdlcLSOperDATMODE This object reflects whether the current
communications mode with the adjacent link
station is two-way-alternate (half) or
two-way-simultaneous (full). | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.13 |
| sdlcLSOperLastModifyTime This object describes the value of sysUpTime
when this link station definition was last
modified. If the link station has not been
modified, then this value shall be zero. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.41.1.2.2.1.14 |
| sdlcLSOperLastFailTime This object describes the value of sysUpTime
when this SDLC link station last failed. If
the link station has not failed, then this
value shall be zero. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.41.1.2.2.1.15 |
| sdlcLSOperLastFailCause This enumerated object reflects the cause of
the last failure of this SDLC link station. If
the link station has not failed, then this
object will have a value of undefined(1). | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.16 |
| sdlcLSOperLastFailCtrlIn This object reflects the last control octet or
octets (depending on modulus) received by this
SDLC link station at the time of the last
failure. If the link station has not faile… | column | OctetString | .1.3.6.1.2.1.41.1.2.2.1.17 |
| sdlcLSOperLastFailCtrlOut This object reflects the last control octet or
octets (depending on modulus) sent by this SDLC
link station at the time of the last failure.
If the link station has not failed, th… | column | OctetString | .1.3.6.1.2.1.41.1.2.2.1.18 |
| sdlcLSOperLastFailFRMRInfo This object reflects the information field of
the FRMR frame if the last failure for this
SDLC link station was as a result of an invalid
frame. Otherwise, this field has no mean… | column | OctetString | .1.3.6.1.2.1.41.1.2.2.1.19 |
| sdlcLSOperRole This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been… | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.2 |
| sdlcLSOperLastFailREPLYTOs This object reflects the number of times that
the REPLYTO timer had expired for an SDLC link
station at the time of the last failure. If the
link station has not failed, then this… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.41.1.2.2.1.20 |
| sdlcLSOperEcho This object identifies whether the echo bit is
in effect for this particular link station. | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.21 |
| sdlcLSOperGPoll This object describes the group poll address
in effect for this link station instance. | column | Integer32 | .1.3.6.1.2.1.41.1.2.2.1.22 |
| sdlcLSOperSimRim This object reflects the support for
transmission and receipt of SIM and RIM control
frames for the adjacent link station. The
value of this object is set from the XID field
rece… | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.23 |
| sdlcLSOperXmitRcvCap This object reflects the transmit-receive
capabilities for the adjacent SDLC link
station. The value of this object is the value
of the transmit-receive capability indicator
rece… | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.24 |
| sdlcLSOperState This object describes the operational state of
the SDLC link station. The managed system
shall attempt to keep this value consistent
with the administered state, sdlcLSAdminState | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.3 |
| sdlcLSOperMAXDATASend This object contains the actual maximum PDU
size that the local link station can send to
the adjacent link station. This object is
established from the value received in the XID
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.2.2.1.4 |
| sdlcLSOperREPLYTO This object reflects the current reply timeout
(in 1/100ths of a second) for an SDLC link
station. If the link station does not receive
a response to a poll or message before the… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.2.2.1.5 |
| sdlcLSOperMAXIN This object reflects the current maximum
number of unacknowledged I-frames which an SDLC
link station may receive. This shall range
from 1 to (sdlcLSOperMODULO - 1). | column | Integer32 | .1.3.6.1.2.1.41.1.2.2.1.6 |
| sdlcLSOperMAXOUT This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcL… | column | Integer32 | .1.3.6.1.2.1.41.1.2.2.1.7 |
| sdlcLSOperMODULO This object reflects the current modulus for
an SDLC link station. This modulus determines
the size of rotating acknowledgement window
used by the SDLC link station pair. | column | Enumeration | .1.3.6.1.2.1.41.1.2.2.1.8 |
| sdlcLSOperRETRIESm This object controls number of retries in a
retry sequence for an SDLC link station. A
retry sequence is a series of retransmitted
frames ( data or control) for which no positive… | column | Integer32 | .1.3.6.1.2.1.41.1.2.2.1.9 |