sdlcLSAdminGPoll
SNA-SDLC-MIB ·
.1.3.6.1.2.1.41.1.2.1.1.16
Object
column
r/w
Integer32
This object describes the group poll address
for this link station instance. If group poll
is not in effect for this link station
instance, the value for sdlcLSAdminGPoll should
be zero.
Depending on the implementation, a write
operation to this administered value may not
change the operational value, sdlcLSOperGPoll,
until the link station is cycled inactive.
Context
- MIB
- SNA-SDLC-MIB
- OID
.1.3.6.1.2.1.41.1.2.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sdlcLSAdminEntry
- Table
- sdlcLSAdminTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-254
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdlcLSAddress This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port. | column | Integer32 | .1.3.6.1.2.1.41.1.2.1.1.1 |
| sdlcLSAdminMODULO This object controls the modulus for an SDLC
link station. This modulus determines the size
of the rotating acknowledgement window used the
SDLC link station pair.
… | column | Enumeration | .1.3.6.1.2.1.41.1.2.1.1.10 |
| sdlcLSAdminRETRIESm This object controls number of retries in a
retry sequence for the local SDLC link
station. A retry sequence is a series of
retransmitted frames ( data or control) for
which no p… | column | Integer32 | .1.3.6.1.2.1.41.1.2.1.1.11 |
| sdlcLSAdminRETRIESt This object controls the interval (in 1/100ths
of a second) between retry sequences for the
local SDLC link station if multiple retry
sequences are specified . A retry sequence i… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.2.1.1.12 |
| sdlcLSAdminRETRIESn This object controls the number of times that
a retry sequence is repeated for the local SDLC
link station. A retry sequence is a series of
retransmitted frames ( data or control… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.2.1.1.13 |
| sdlcLSAdminRNRLIMIT This object controls the length of time (in
1/100ths of a second) that an SDLC link station
will allow its adjacent link station to remain
in a busy (RNR) state before declaring i… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.2.1.1.14 |
| sdlcLSAdminDATMODE This object controls whether communications
mode with the adjacent link station is
two-way-alternate (half) or two-way-simultaneous
(full).
A write operation to thi… | column | Enumeration | .1.3.6.1.2.1.41.1.2.1.1.15 |
| sdlcLSAdminSimRim This object controls the support for
transmission and receipt of SIM and RIM control
frames for this link station. The value of
this object controls the setting of the
transmit-r… | column | Enumeration | .1.3.6.1.2.1.41.1.2.1.1.17 |
| sdlcLSAdminXmitRcvCap This object controls the transmit-receive
capabilities for this SDLC link station. The
value of this object establishes the value of
the transmit-receive capability indicator sen… | column | Enumeration | .1.3.6.1.2.1.41.1.2.1.1.18 |
| sdlcLSAdminRowStatus This object is used by a management station to
create or delete the row entry in
sdlcLSAdminTable following the RowStatus
textual convention.
Upon successful creati… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.41.1.2.1.1.19 |
| sdlcLSAdminName An octet string that defines the local name of
the SDLC link station. This field may be sent
in the XID3 control vector 0x0E, type 0xF7. | column | OctetString | .1.3.6.1.2.1.41.1.2.1.1.2 |
| sdlcLSAdminState This object controls the desired state of the
SDLC station. The managed system shall attempt
to keep the operational state, sdlcLSOperState,
consistent with this value. | column | Enumeration | .1.3.6.1.2.1.41.1.2.1.1.3 |
| sdlcLSAdminISTATUS This parameter controls the desired state,
sdlcLSAdminState, of the SDLC link station at
link station start-up. | column | Enumeration | .1.3.6.1.2.1.41.1.2.1.1.4 |
| sdlcLSAdminMAXDATASend This object contains the maximum PDU size that
the local link station thinks it can send to
the adjacent link station before having
received any XID from the ALS. After the
maxim… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.2.1.1.5 |
| sdlcLSAdminMAXDATARcv This object contains the maximum PDU size that
the local link station can receive from the
adjacent link station. This value is sent in
the XID to the ALS.
This va… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.41.1.2.1.1.6 |
| sdlcLSAdminREPLYTO This object controls the reply timeout (in
1/100ths of a second) for an SDLC link
station. If the link station does not receive
a response to a poll or message before the
specifi… | column | SNMPv2-TCTimeInterval | .1.3.6.1.2.1.41.1.2.1.1.7 |
| sdlcLSAdminMAXIN This object controls the maximum number of
unacknowledged I-frames which an SDLC link
station may receive. This should range from 1
to (sdlcLSAdminMODULO - 1). This value is sen… | column | Integer32 | .1.3.6.1.2.1.41.1.2.1.1.8 |
| sdlcLSAdminMAXOUT This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcL… | column | Integer32 | .1.3.6.1.2.1.41.1.2.1.1.9 |