snaNodeOperLuTermDefault
SNA-NAU-MIB ·
.1.3.6.1.2.1.34.1.1.3.1.7
Object
column
Enumeration
The value identifies the default method used to
deactivate LUs for this Node.
For LU6.2s, 'unbind(1)' is the only valid value.
unbind(1) - terminate the LU-LU session by sending
an SNA UNBIND request.
termself(2) - terminate the LU-LU session by sending
an SNA TERM-SELF (Terminate Self) request on
the SSCP-LU session. The SSCP will inform the
remote session LU partner to send an UNBIND
request to terminate the session.
rshutd(3) - terminate the LU-LU session by sending
an SNA RSHUTD (Request ShutDown) request to
the remote session LU partner. The remote LU
will then send an UNBIND request to terminate
the session.
poweroff(4) - terminate the LU-LU session by sending
either an SNA LUSTAT (LU Status) request on
the LU-LU session or an SNA NOTIFY request on
the SSCP-LU session indicating that the LU has
been powered off. Sending both is also
acceptable. The result should be that the
remote session LU partner will send an UNBIND
to terminate the session.
This object describes the default behavior for this
Node; however, it is possible that for a specific LU
the behavior indicated by the snaLuOperTerm object is
different.
Context
- MIB
- SNA-NAU-MIB
- OID
.1.3.6.1.2.1.34.1.1.3.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- snaNodeOperEntry
- Table
- snaNodeOperTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unbind |
2 | termself |
3 | rshutd |
4 | poweroff |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snaNodeOperName The value identifies the current name of the Node.
In Type 2.1 networks, this
is a fully-qualified name, meaning that the Node name
is preceded by the NetId (if present) with a pe… | column | OctetString | .1.3.6.1.2.1.34.1.1.3.1.1 |
| snaNodeOperStopMethod This value identifies the current Node shutdown
method to be used by the Agent to stop the Node.
When the Agent changes the Node's state to 'inactive
(1)', the Agent must use the … | column | Enumeration | .1.3.6.1.2.1.34.1.1.3.1.10 |
| snaNodeOperState The current state of the Node.
The values have the following meanings:
inactive (1), a row representing the Node has
been created in the AdminTable
and, the Node is … | column | Enumeration | .1.3.6.1.2.1.34.1.1.3.1.11 |
| snaNodeOperHostSscpId This value identifies the current SSCP Id
associated with the Node. This object is only
applicable to PU 2.0s. If the Node
is not a PU 2.0 type, then this object contains a
zero l… | column | OctetString | .1.3.6.1.2.1.34.1.1.3.1.12 |
| snaNodeOperStartTime The timestamp (e.g, the Agent's sysUpTime value)
at the Node activation. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.34.1.1.3.1.13 |
| snaNodeOperLastStateChange The timestamp (e.g., the Agent's sysUpTime value)
at the last state change of the Node. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.34.1.1.3.1.14 |
| snaNodeOperActFailures This value identifies the number of failed Node
activation attempts. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.34.1.1.3.1.15 |
| snaNodeOperActFailureReason The value indicates the reason for the activation
failure. The value 'other (1)' indicates a reason
not listed in the enumeration. This object
will be sent in the trap snaNodeAct… | column | Enumeration | .1.3.6.1.2.1.34.1.1.3.1.16 |
| snaNodeOperType The value identifies the current type of the Node. | column | Enumeration | .1.3.6.1.2.1.34.1.1.3.1.2 |
| snaNodeOperXidFormat The value identifies the type of XID format currently
used for this Node.
Note that there is no format type 2. | column | Enumeration | .1.3.6.1.2.1.34.1.1.3.1.3 |
| snaNodeOperBlockNum The value identifies the block number for this Node
instance. It is the first 3 hexadecimal digits
of the SNA Node id. | column | OctetString | .1.3.6.1.2.1.34.1.1.3.1.4 |
| snaNodeOperIdNum The value identifies the ID number for this Node
instance. This is the last 5 hexadecimal digits of
the SNA Node id. | column | OctetString | .1.3.6.1.2.1.34.1.1.3.1.5 |
| snaNodeOperEnablingMethod The value indicates how the Node is activated for
the first time.
The values have the following meanings:
other (1) - not at boot time, LU activation
or by a Management… | column | Enumeration | .1.3.6.1.2.1.34.1.1.3.1.6 |
| snaNodeOperMaxLu This value identifies the current, maximum number
of LUs that are activated for this Node. For PU2.1,
this object refers to the number of dependent LUs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.34.1.1.3.1.8 |
| snaNodeOperHostDescription This value identifies the remote host currently
associated with this Node.
Since SSCP Id's may not be unique
across hosts, the host description
is required to uniqu… | column | OctetString | .1.3.6.1.2.1.34.1.1.3.1.9 |