sleISISIfMplsLdpIgpSync

SLE-ISIS-MIB · .1.3.6.1.4.1.6296.101.56.3.1.1.2
MIB view Table view

Object

column Enumeration 
Use this command to enable LDP-ISIS synchronization.
0 : diaable
1 : level-1
2 : level-1-2,(default)
3 : level-2

Context

MIB
SLE-ISIS-MIB
OID
.1.3.6.1.4.1.6296.101.56.3.1.1.2
Type
column
Access
readonly
Status
current
Parent
slsISISIfEntry
Table
slsISISIfTable
Siblings
34

Syntax

Enumeration

Values & Constraints

Enumerated Values
0diaable
1level1
2level1To2
3level2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sleISISIfIndex
vlan interface index for isis protocol.
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.1
sleISISIfAuthKeyChainLevle1
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
columnOctetString.1.3.6.1.4.1.6296.101.56.3.1.1.10
sleISISIfAuthKeyChainLevle2
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
columnOctetString.1.3.6.1.4.1.6296.101.56.3.1.1.11
sleISISIfBfd
Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.12
sleISISIfBfdDisable
Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.13
sleISISIfCircuitType
Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.14
sleISISIfCsnpIntervalLevel1
Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.15
sleISISIfCsnpIntervalLevel2
Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.16
sleISISIfHelloPadding
Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.17
sleISISIfHelloIntervalLevel1
Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.18
sleISISIfHelloIntervalLevel2
Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.19
sleISISIfHelloIntervalMinimalLevel1
Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.20
sleISISIfHelloIntervalMinimalLevel2
Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.21
sleISISIfHelloMultiplierLevel1
Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.22
sleISISIfHelloMultiplierLevel2
Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.23
sleISISIfLspInterval
Use this command to set the Link State Packet (LSP) transmission interval. range : 1 - 4294967295 default : 33
columnUnsigned32.1.3.6.1.4.1.6296.101.56.3.1.1.24
sleISISIfMeshGroup
Use this command to set Mesh Group ID on the current interface. range : 1 - 4294967295 disable : 0
columnUnsigned32.1.3.6.1.4.1.6296.101.56.3.1.1.25
sleISISIfMetricLevel1
Use this command to set default metric for the interface. range : 1 - 63 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.26
sleISISIfMetricLevel2
Use this command to set default metric for the interface. range : 1 - 63 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.27
sleISISIfNetwork
Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.28
sleISISIfPriorityLevel1
Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.29
sleISISIfIpRouter
Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.3
sleISISIfPriorityLevel2
Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.30
sleISISIfRestartHelloIntervalLevel1
Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.31
sleISISIfRestartHelloIntervalLevel2
Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.32
sleISISIfRetransmitInterval
Use this command to set LSP retransmission interval. range : 0 - 65535 default : 5
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.33
sleISISIfWideMetricLevel1
Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.34
sleISISIfWideMetricLevel2
Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
columnInteger32.1.3.6.1.4.1.6296.101.56.3.1.1.35
sleISISIfAuthSendLevel1
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.4
sleISISIfAuthSendLevel2
Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.5
sleISISIfAuthModeMd5Levle1
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.6
sleISISIfAuthModeMd5Levle2
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.7
sleISISIfAuthModeTextLevle1
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.8
sleISISIfAuthModeTextLevle2
Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
columnEnumeration.1.3.6.1.4.1.6296.101.56.3.1.1.9