sleISISIfHelloMultiplierLevel1
SLE-ISIS-MIB ·
.1.3.6.1.4.1.6296.101.56.3.1.1.22
Object
column
Integer32
Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
Context
- MIB
- SLE-ISIS-MIB
- OID
.1.3.6.1.4.1.6296.101.56.3.1.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- slsISISIfEntry
- Table
- slsISISIfTable
- Siblings
- 34
Syntax
Integer32
Values & Constraints
Object Constraints
range: 2-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleISISIfIndex vlan interface index for isis protocol. | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.1 |
| sleISISIfAuthKeyChainLevle1 Use this command to set the key chain to be used for authentication on the interface-related packets.
disable : null string | column | OctetString | .1.3.6.1.4.1.6296.101.56.3.1.1.10 |
| sleISISIfAuthKeyChainLevle2 Use this command to set the key chain to be used for authentication on the interface-related packets.
disable : null string | column | OctetString | .1.3.6.1.4.1.6296.101.56.3.1.1.11 |
| sleISISIfBfd Use this command to enable/disable the BFD check on interface.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.12 |
| sleISISIfBfdDisable Use this command to enable/disable the BFD check on interface.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.13 |
| sleISISIfCircuitType Use this command to set the circuit type for the interface.
1 : level-1
2 : level-1-2,(default)
3 : level-2 | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.14 |
| sleISISIfCsnpIntervalLevel1 Use this command to set CSNP (Complete sequence number PDU) interval in seconds.
range : 1 - 65535
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.15 |
| sleISISIfCsnpIntervalLevel2 Use this command to set CSNP (Complete sequence number PDU) interval in seconds.
range : 1 - 65535
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.16 |
| sleISISIfHelloPadding Use this command to configure the padding of the ISIS Hello packet.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.17 |
| sleISISIfHelloIntervalLevel1 Use this command to set the Hello interval in seconds.
range : 1 - 65535
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.18 |
| sleISISIfHelloIntervalLevel2 Use this command to set the Hello interval in seconds.
range : 1 - 65535
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.19 |
| sleISISIfMplsLdpIgpSync Use this command to enable LDP-ISIS synchronization.
0 : diaable
1 : level-1
2 : level-1-2,(default)
3 : level-2 | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.2 |
| sleISISIfHelloIntervalMinimalLevel1 Use this command to set the Hello interval in seconds.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.20 |
| sleISISIfHelloIntervalMinimalLevel2 Use this command to set the Hello interval in seconds.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.21 |
| sleISISIfHelloMultiplierLevel2 Use this command to set multiplier for Hello holding time.
range : 2 - 10
default : 3 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.23 |
| sleISISIfLspInterval Use this command to set the Link State Packet (LSP) transmission interval.
range : 1 - 4294967295
default : 33 | column | Unsigned32 | .1.3.6.1.4.1.6296.101.56.3.1.1.24 |
| sleISISIfMeshGroup Use this command to set Mesh Group ID on the current interface.
range : 1 - 4294967295
disable : 0 | column | Unsigned32 | .1.3.6.1.4.1.6296.101.56.3.1.1.25 |
| sleISISIfMetricLevel1 Use this command to set default metric for the interface.
range : 1 - 63
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.26 |
| sleISISIfMetricLevel2 Use this command to set default metric for the interface.
range : 1 - 63
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.27 |
| sleISISIfNetwork Use this command to change a broadcast interface network type to a point-to-point network type.
0 : disable
1 : broadcast
2 : point-to-point | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.28 |
| sleISISIfPriorityLevel1 Use this command to set the priority for LAN DIS election.
range : 0 - 127
default : 64 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.29 |
| sleISISIfIpRouter Use this command to enable ISIS IPv4 routing on the interface.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.3 |
| sleISISIfPriorityLevel2 Use this command to set the priority for LAN DIS election.
range : 0 - 127
default : 64 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.30 |
| sleISISIfRestartHelloIntervalLevel1 Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV.
range : 1 - 65535
default : 3 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.31 |
| sleISISIfRestartHelloIntervalLevel2 Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV.
range : 1 - 65535
default : 3 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.32 |
| sleISISIfRetransmitInterval Use this command to set LSP retransmission interval.
range : 0 - 65535
default : 5 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.33 |
| sleISISIfWideMetricLevel1 Use this command to set wide metric for the interface.
range : 1 - 16777214
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.34 |
| sleISISIfWideMetricLevel2 Use this command to set wide metric for the interface.
range : 1 - 16777214
default : 10 | column | Integer32 | .1.3.6.1.4.1.6296.101.56.3.1.1.35 |
| sleISISIfAuthSendLevel1 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.4 |
| sleISISIfAuthSendLevel2 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.5 |
| sleISISIfAuthModeMd5Levle1 Use this command to set the MD5 authentication mode.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.6 |
| sleISISIfAuthModeMd5Levle2 Use this command to set the MD5 authentication mode.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.7 |
| sleISISIfAuthModeTextLevle1 Use this command to set the MD5 authentication mode.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.8 |
| sleISISIfAuthModeTextLevle2 Use this command to set the MD5 authentication mode.
1 : enable
0 : disable | column | Enumeration | .1.3.6.1.4.1.6296.101.56.3.1.1.9 |