sleISISIfControlAuthKeyChainLevle1
SLE-ISIS-MIB ·
.1.3.6.1.4.1.6296.101.56.3.2.15
Object
scalar
r/w
OctetString
Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
Context
- MIB
- SLE-ISIS-MIB
- OID
.1.3.6.1.4.1.6296.101.56.3.2.15- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleISISIfControl
- Siblings
- 39
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleISISIfControlRequest Description. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.1 |
| sleISISIfControlAuthSendLevel2 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.10 |
| sleISISIfControlAuthModeMd5Levle1 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.11 |
| sleISISIfControlAuthModeMd5Levle2 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.12 |
| sleISISIfControlAuthModeTextLevle1 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.13 |
| sleISISIfControlAuthModeTextLevle2 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.14 |
| sleISISIfControlAuthKeyChainLevle2 Use this command to set the key chain to be used for authentication on the interface-related packets.
disable : null string | scalar | OctetString | .1.3.6.1.4.1.6296.101.56.3.2.16 |
| sleISISIfControlBfd Use this command to enable/disable the BFD check on interface.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.17 |
| sleISISIfControlBfdDisable Use this command to enable/disable the BFD check on interface.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.18 |
| sleISISIfControlCircuitType Use this command to set the circuit type for the interface.
1 : level-1
2 : level-1-2,(default)
3 : level-2 | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.19 |
| sleISISIfControlStatus Description. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.56.3.2.2 |
| sleISISIfControlCsnpIntervalLevel1 Use this command to set CSNP (Complete sequence number PDU) interval in seconds.
range : 1 ? 65535
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.20 |
| sleISISIfControlCsnpIntervalLevel2 Use this command to set CSNP (Complete sequence number PDU) interval in seconds.
range : 1 ? 65535
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.21 |
| sleISISIfControlHelloPadding Use this command to configure the padding of the ISIS Hello packet.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.22 |
| sleISISIfControlHelloIntervalLevel1 Use this command to set the Hello interval in seconds.
range : 1 ? 65535
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.23 |
| sleISISIfControlHelloIntervalLevel2 Use this command to set the Hello interval in seconds.
range : 1 ? 65535
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.24 |
| sleISISIfControlHelloIntervalMinimalLevel1 Use this command to set the Hello interval in seconds.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.25 |
| sleISISIfControlHelloIntervalMinimalLevel2 Use this command to set the Hello interval in seconds.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.26 |
| sleISISIfControlHelloMultiplierLevel1 Use this command to set multiplier for Hello holding time.
range : 2 ? 10
default : 3 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.27 |
| sleISISIfControlHelloMultiplierLevel2 Use this command to set multiplier for Hello holding time.
range : 2 ? 10
default : 3 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.28 |
| sleISISIfControlLspInterval Use this command to set the Link State Packet (LSP) transmission interval.
range : 1 ? 4294967295
default : 33 | scalar | Unsigned32 | .1.3.6.1.4.1.6296.101.56.3.2.29 |
| sleISISIfControlTimer Description. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.56.3.2.3 |
| sleISISIfControlMeshGroup Use this command to set Mesh Group ID on the current interface.
range : 1 ? 4294967295
disable : 0 | scalar | Unsigned32 | .1.3.6.1.4.1.6296.101.56.3.2.30 |
| sleISISIfControlMetricLevel1 Use this command to set default metric for the interface.
range : 1 ? 63
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.31 |
| sleISISIfControlMetricLevel2 Use this command to set default metric for the interface.
range : 1 ? 63
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.32 |
| sleISISIfControlNetwork Use this command to change a broadcast interface network type to a point-to-point network type.
0 : disable
1 : broadcast
2 : point-to-point | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.33 |
| sleISISIfControlPriorityLevel1 Use this command to set the priority for LAN DIS election.
range : 0 ? 127
default : 64 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.34 |
| sleISISIfControlPriorityLevel2 Use this command to set the priority for LAN DIS election.
range : 0 ? 127
default : 64 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.35 |
| sleISISIfControlRestartHelloIntervalLevel1 Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV.
range : 1 ? 65535
default : 3 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.36 |
| sleISISIfControlRestartHelloIntervalLevel2 Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV.
range : 1 ? 65535
default : 3 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.37 |
| sleISISIfControlRetransmitInterval Use this command to set LSP retransmission interval.
range : 0 ? 65535
default : 5 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.38 |
| sleISISIfControlWideMetricLevel1 Use this command to set wide metric for the interface.
range : 1 - 16777214
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.39 |
| sleISISIfControlTimeStamp Description. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.56.3.2.4 |
| sleISISIfControlWideMetricLevel2 Use this command to set wide metric for the interface.
range : 1 - 16777214
default : 10 | scalar | Integer32 | .1.3.6.1.4.1.6296.101.56.3.2.40 |
| sleISISIfControlReqResult Description. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.56.3.2.5 |
| sleISISIfControlIndex vlan interface index for isis protocol. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.56.3.2.6 |
| sleISISIfControlMplsLdpIgpSync Use this command to enable LDP-ISIS synchronization.
0 : diaable
1 : level-1
2 : level-1-2,(default)
3 : level-2 | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.7 |
| sleISISIfControlIpRouter Use this command to enable ISIS IPv4 routing on the interface.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.8 |
| sleISISIfControlAuthSendLevel1 Use this command to set the send-only option to the interface-related packets.
1 : enable
0 : disable | scalar | Enumeration | .1.3.6.1.4.1.6296.101.56.3.2.9 |